SAMTEC C-140-03-H Vita 42 (leaded) socket assembly Datasheet

REVISION M
ANY REV MADE TO THIS PRINT MUST HAVE AN UPDATED MKT PRINT
NOTES:
1. USE ASP-103597-01-B BODY FOR NON-STANDARD 19 POSITION.
2.
REPRESENTS A CRITICAL DIMENSION.
3. BURR ALLOWANCE: .0005[0.013] MAX.
4. MINIMUM PUSHOUT FORCE: .5 LB.
5. MAXIMUM ALLOWABLE BOW: .002[0.05] INCH/INCH AFTER ASSEMBLY.
6. CONTACT TO BE FLUSH +/-.002.
7. ONE REEL MINIMUM PLATING REQUIREMENT (85,000 CONTACTS PER REEL).
8. ALL DIMS TO BE SYMMETRICAL ABOUT THE CENTERLINE WITHIN ±.001[0.03].
9. .0025[0.064] MAX VARIATION BETWEEN SOLDERBALLS.
10. REFER TO VISUAL INSPECTION BOARD FOR SOLDERBALL APPEARANCE CHECKS.
11. THE DISTANCE FROM THE CENTER OF ANY SOLDERBALL TO THE
CENTER OF ANY ADJACENT INNER PEG SHALL BE .025±.005[0.64±0.13].
12. PARTS TO BE PACKAGED IN TAPE & REEL. FOR QTY'S LESS THAN 125 PCS, NO
TRAILER OR LEADER WILL BE SUPPLIED.
DO NOT
SCALE FROM
THIS PRINT
1.732 44.00
REF
1.070 27.18 REF
.970 24.64 REF
.900±.002 22.86±0.05
((19 POS - 1) X .0500[1.270])
01
.630 16.00
REF
19
A
5
USER DIRECTION OF UN-REELING
POCKET NOT DETAILED
B
C.145 3.68
.320 8.13
.250 6.35
D
REF
REF
.095 2.41
REF
E
BY SIGNING THIS DOCUMENT
YOU ARE ACCEPTING THE
CONDITIONS SET WITHIN.
YOUR REQUIREMENTS MUST BE
LISTED WITHIN THIS DRAWING.
WHERE NO DIRECTION FROM THE
CUSTOMER IS IDENTIFIED
SAMTEC'S PROCESS
REQUIREMENTS WILL BE USED.
F
PACKAGING VIEW
SCALE 1.5:2
.035 0.89 REF
.354 8.99
.017±.010 0.43±0.25
.309±.020 7.85±0.51
4
"A"
.104 2.64 REF
EXCEPTIONS:
PHONE No:
NON STANDARD
COMPONENT
PART NUMBER
QUANTITY
1
ASP-103597-01-B
1.0000
UL 94 V0, COLOR: BLACK
2
C-140-03-H
114.00
PHOS BRONZE, 521 HARD TEMPER
3
SDB-030-6337
114.00
63% TIN /37% LEAD
4
K-850-650
1.0000
POLYIMIDE FILM
CT-ASP1132MS
1.0000
1
3
SECTION "A"-"A"
ITEM NO.
5
2
.134±.003 3.41±0.08
.012 0.31
(SEE NOTE 9)
"A"
PRINTED NAME:
CUSTOMER SIGNATURE:
COMPANY:
DATE:
.139 3.54
MATERIAL
CONDUCTIVE POLYMER
ASSEMBLY
TOOLING
PROCESS
X
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS
.XX: .01
.XXX: .005
.XXXX: .0020
ANGLES
2
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
SHEET SCALE: 3:1
PLATING:
CONTACT AREA: .000030 GOLD OVER .000050 NICKEL
REMAINDER: .000003 FLASH GOLD OVER .000050 NICKEL
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail [email protected]
code 55322
DESCRIPTION:
VITA 42 (LEADED) SOCKET ASSEMBLY
DWG. NO.
PACKAGING
OTHER
C:\EnterpriseVault\DWG\MISC\MKTG\ASP-103612-01-MKT.SLDDRW
BY:
ASP-103612-01
BRYANT
10/22/2002
SHEET 1 OF 2
REVISION M
RECOMMENDED BOARD LAYOUT
.9000 22.860
19
01
A
B
C
.2500 6.350
D
E
F
"A"
RECOMMENDED STENCIL LAYOUT
NOTE:
OUTER ROWS MAY NOT NEED VIAS - THIS IS LEFT TO
THE DISCRETION OF THE BOARD DESIGNER.
STENCIL TO BE .0060[.152] THICK
.900 22.86
.0250 0.635
19
.050 1.27
(TYP)
01
A
B
.0100 0.254
TRACE
C
.250 6.35
D
E
F
.050 1.27
(TYP)
.0310 0.787
FREE OF SOLDER MASK
.0250 0.635
(TYP)
.0250 0.64
PAD
.0100 0.254
VIA (PLATED)
DETAIL "A"
SCALE 12 : 1
.0200 0.508
PAD
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
SHEET SCALE: 3:1
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail [email protected]
code 55322
DESCRIPTION:
VITA 42 (LEADED) SOCKET ASSEMBLY
DWG. NO.
ASP-103612-01
BRYANT
BY:
C:\EnterpriseVault\DWG\MISC\MKTG\ASP-103612-01-MKT.SLDDRW
10/22/2002
SHEET 2 OF 2
Similar pages