1550nm Emitting,1310nm Receiving(PIN-TIA,5pin-out,3.3V) Bi-directional Diplexer Optical Module C-15/13-FXXM-PX-XXXX/XXX-XX Features • Single fiber bi-directional operation • Laser diode with multi-quantum- well structure • Low threshold current • InGaAs/InP PIN Photodiode with trans-impedance amplifier • High sensitivity with AGC* • Differential ended output • Single +3.3V Power Supply • Integrated WDM coupler • Un-cooled operation from -40ºC to +85ºC • Hermetically sealed active component • SM/MM fiber pigtailed with optional FC/ST/SC/MU/LC/- connector • Design for fiber optic networks • RoHS Compliant available Absolute Maximum Rating (Tc=25ºC) Parameter Fiber Output Power Symbol Value Unit Pf 0.6(L)/1(M)/2(H) mW L/M/H LD Reverse Voltage VRLD 2 V PIN-TIA Voltage VCC 4.5 V Operating Temperature Topr -40 to +85 ºC Storage Temperature Tstg -40 to +85 ºC (All optical data refer to a coupled 9/125µm SM fiber & 50/125µm SM fiber) Optical and Electrical Characteristics( Tc=25ºC) Parameter Laser Diode Optical Output Power Symbol Min Typical Max Unit Test Condition L M H 0.2 0.5 1 1.6 0.5 1 - mW CW, Ith+ 25mA , kink free λ 1530 1550 1570 nm CW, Pf=Pf(Min) Spectrum Width (RMS) ∆λ - - 5 nm CW, Pf=Pf(Min) Threshold Current Ith - 10 15 mA CW Forward Voltage VF - 1.2 1.5 V CW, Pf=Pf(Min) tr/ tf - - 0.5 ns Ibias=Ith ,10% ~ 90% Im 100 - - µA CW, Pf=Pf(Min),VRPD=2V Dark Current IDARK - - 0.1 µA VRPD=5V Capacitance Ct - 6 15 pF VRPD=5V, f=1MHz ∆Pf/Pf -1.5 - 1.5 dB APC, -40 to +85ºC Peak Wavelength Rise/Fall Time Monitor Diode Monitor Current Module Tracking Error Optical Crosstalk CRT < -45 dB Note: 1.Pin assignment can be customized. 2.Specifications subject to change without notice. LUMINENTOIC.COM 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 1 LUMNDS1557-APR1106 rev. A.0 1550nm Emitting,1310nm Receiving(PIN-TIA,5pin-out,3.3V) Bi-directional Diplexer Optical Module C-15/13-FXXM-PX-XXXX/XXX-XX Detector λ=1100-1360nm DC Electrical Characteristics( Tc=25ºC) Parameter Symbol Min Typical Max Unit Power Supply Vcc 3.0 3.3 3.6 V Differential Output Voltage Supply Current (no load) Vd Icc F02 - - 1000 F04 - 260 450 F06 185 250 415 F02 - - 35 F04 - 21 30 F06 - 26 50 Test Condition mV mA AC/Optical and Electrical Characteristics( Tc=25ºC) Parameter Symbol Min Typical Max Unit Test Condition 1100 1310 1360 nm - F02 52 - 70 F04 6 7 - F06 1.92 2.5 3.4 F02 120 140 - F04 404 470 - F06 700 920 1100 F02 -3 -0 - F04 -7 -6 - F06 -3 - - BER<10-12 @1.25Gbps PRBS 27-1,Er=10dB F02 - -37 -35 BER<10-10 @155Mbps PRBS 223-1,Er=10dB F04 - -33 -30 F06 - -26 -23 F02 - 50 - F04 48 50 52 F06 48 50 62 Detection Range Gain @ 10 Mbps Differential Bandwidth Saturation Power Sensitivity Output Resistance LUMINENTOIC.COM G BW Psat Sens. Rout Measure differentially,AC coupled,RL=50Ω V/mW Measure differentially,AC coupled,RL=50Ω Measure differentially with 30uAp-p signal MHz BER<10-10 @155Mbps PRBS 223-1,Er=10dB dBm dBm BER<10-10 @622Mbps PRBS 223-1,Er=10dB BER<10-10 @622Mbps PRBS 223-1,Er=10dB BER<10-12 @1.25Gbps PRBS 27-1,Er=10dB ohm 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 2 LUMNDS1557-APR1106 rev. A.0 1550nm Emitting,1310nm Receiving(PIN-TIA,5pin-out,3.3V) Bi-directional Diplexer Optical Module C-15/13-FXXM-PX-XXXX/XXX-XX Pin Assignment LD Pin Assignment A Type D Type Pin 1 : Laser Cathode Pin 2 : Laser Anode and Case Gnd Pin 3 : Monitor Diode Anode Pin 4 : Monitor Diode Cathode Outline Demensions Units in mm. Imon Pin 1 : Laser Anode and Monitor Diode Cathode Pin 2 : Case Gnd Pin 3 : Laser Cathode Pin 4 : Monitor Diode Anode PIN-TIA Pin Assignment Vcc(+3.3V) Pin Assignment 1~Dout Dout PD Dout 2~Vcc F02 3~GND(CASE) 4~Imon GND 5~Dout Functional Schematic Imon Vcc(+3.3V) Pin Assignment 1~Dout Dout PD Dout 2~Vcc F04 3~GND(CASE) 4~Imon GND 5~Dout Functional Schematic Imon Vcc(+3.3V) Pin Assignment 1~Dout Dout PD Dout 2~Vcc F06 3~GND(CASE) 4~Imon GND 5~Dout Functional Schematic LUMINENTOIC.COM 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 3 LUMNDS1557-APR1106 rev. A.0 1550nm Emitting,1310nm Receiving(PIN-TIA,5pin-out,3.3V) Bi-directional Diplexer Optical Module C-15/13-FXXM-PX-XXXX/XXX-XX Outline Dimensions Units in mm. C-15/13-FXXM-PX-SXXX/XXX-XX Connector Type FC:FC/PC PIN-TIA LD DIMENSION: A:7.0~7.6 mm (Low & Middle power) A:9.3~9.9 mm (High power) SC:SC/PC ST:ST/PC MU:MU/PC C-15/13-FXXM-PX-MXXX/XXX-XX LC:LC/PC PIN-TIA " LD " DIMENSION: A:7.2~9.2 mm LUMINENTOIC.COM 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 4 LUMNDS1557-APR1106 rev. A.0 1550nm Emitting,1310nm Receiving(PIN-TIA,5pin-out,3.3V) Bi-directional Diplexer Optical Module C-15/13-FXXM-PX-XXXX/XXX-XX Ordering Information C-15/13-FXXM-PX-XXXX/XXX-XX M = with 5 pinout 1550nm Transmitter 1310nm Receiver Fiber Output Power L/M/H Pin Assignment "-"=A Type D =D Type Connector FC/ST/SC/MU/LC/- Fiber Application 02: 155 Mb/s PIN-TIA+3.3V 04: 622 Mb/s PIN-TIA+3.3V 06:1250 Mb/s PIN-TIA+3.3V S=SM 9/125µm M=MM 50/125µm " - " = PC Fiber APC = APC Fiber (for single mode) RoHS Compliant -/G5/GR Blank = RoHS non-compliant product G5 = RoHS 5/6-compliant product (lead exemption) GR = Full RoHS compliant product (no exemption) Warnings Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD). A static free environment is highly recommended. Follow guidelines according to proper ESD procedures. Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirect radiation. Legal Notice IMPORTANT NOTICE! All information contained in this document is subject to change without notice, at LuminentOIC＇s sole and absolute discretion. LuminentOIC warrants performance of its products to current specifications only in accordance with the company＇s standard one-year warranty; however, specifications designated as “preliminary＂ are given to describe components only, and LuminentOIC expressly disclaims any and all warranties for said products, including express, implied, and statutory warranties, warranties of merchantability, fitness for a particular purpose, and non-infringement of proprietary rights. Please refer to the company＇s Terms and Conditions of Sale for further warranty information. LuminentOIC assumes no liability for applications assistance, customer product design, software performance, or infringement of patents, services, or intellectual property described herein. No license, either express or implied, is granted under any patent right, copyright, or intellectual property right, and LuminentOIC makes no representations or warranties that the product(s) described herein are free from patent, copyright, or intellectual property rights. Products described in this document are NOT intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. LuminentOIC customers using or selling products for use in such applications do so at their own risk and agree to fully defend and indemnify LuminentOIC for any damages resulting from such use or sale. THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN “AS IS＂ BASIS. Customer agrees that LuminentOIC is not liable for any actual, consequential, exemplary, or other damages arising directly or indirectly from any use of the information contained in this document. Customer must contact LuminentOIC to obtain the latest version of this publication to verify, before placing any order, that the information contained herein is current. © LuminentOIC, Inc. 2006 All rights reserved LUMINENTOIC.COM 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 5 LUMNDS1557-APR1106 rev. A.0