Source C-13-14-F06-BD-SSCL-G5 1310nm emitting , 1490nm receiving (pin-tia, 3.3v), bi-directional diplexer optical module Datasheet

1310nm Emitting , 1490nm Receiving (PIN-TIA, 3.3V),
Bi-directional Diplexer Optical Module
C-13/14-F06-BD-SXXL-XX
Features
• Single fiber bi-directional operation
• Laser diode with multi-quantum- well structure
• Low threshold current
• InGaAs/InP PIN Photodiode with trans-impedance amplifier
• High sensitivity with AGC*
• Differential ended output
• Single Supply Voltage +3.3V
• Integrated WDM coupler
• Un-cooled operation from -40ºC to +85ºC
• Hermetically sealed active component
• LC/SC BOSA
• Design for fiber optic networks
• RoHS Compliant available
Absolute Maximum Rating (Tc=25ºC)
Parameter
Symbol
Value
Unit
Pf
1
mW
LD Reverse Voltage
VRLD
2
V
PIN-TIA Voltage
VCC
4.5
V
Operating Temperature
Topr
-40 to +85
ºC
Storage Temperature
Tstg
-40 to +85
ºC
Fiber Output Power
L
(All optical data refer to a coupled 9/125µm SM fiber)
Optical and Electrical Characteristics( Tc=25ºC)
Parameter
Symbol
Min
Typical
Max
Unit
Test Condition
Pf
0.3
-
0.8
mW
CW, Ith+ 20mA , kink free
λ
1290
1310
1330
nm
CW, Pf=Pf(Min)
Spectrum Width (RMS)
∆λ
-
-
3
nm
CW, Pf=Pf(Min)
Threshold Current
Ith
-
10
15
mA
CW
Forward Voltage
VF
-
1.2
1.5
V
CW, Pf=Pf(Min)
Differential series resistance
rs
-
-
15
Ω
tr/ tf
-
-
0.3
ns
Ibias=Ith ,10% to 90%
Im
100
-
-
µA
CW, Pf=Pf(Min),VRPD=2V
Dark Current
IDARK
-
-
0.1
µA
VRPD=5V
Capacitance
Ct
-
6
15
pF
VRPD=5V, f=1MHz
∆Pf/Pf
-1.5
-
1.5
dB
APC, -40 to +85ºC
CRT
-
-
-40
dB
Laser Diode
Optical Output Power
L
Peak Wavelength
Rise/Fall Time
Monitor Diode
Monitor Current
Module
Tracking Error
Optical Cross talk
Note:
1.Pin assignment can be customized.
2.Specifications subject to change without notice.
LUMINENTOIC.COM
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
1
LUMNDS1546-FEB0906
rev. A.0
1310nm Emitting , 1490nm Receiving (PIN-TIA, 3.3V),
Bi-directional Diplexer Optical Module
C-13/14-F06-BD-SXXL-XX
Detector λ=1480-1500nm
DC Electrical Characteristics( Tc=25ºC)
Parameter
Symbol
Min
Typical
Max
Unit
Test Condition
Power Supply
Vcc
3.0
3.3
3.6
V
Differential Output Voltage
Vd
185
250
415
mV
Supply Current (RL-50Ω)
Icc
-
26
50
mA
Min
Typical
Max
Unit
Test Condition
1480
-
1500
nm
-
G
1.92
2.5
3.4
V/mW
Measure differentially with 30uAp-p
signal
Bandwidth
BW
700
920
1100
MHz
-
Saturation Power
Psat
-3
-
-
dBm
BER<10-12 @1.25Gbps
PRBS 27-1,Er=10dB
Sensitivity
Sens.
-
-26
-23
dBm
BER<10-12 @1.25Gbps
PRBS 27-1,Er=10dB
Output Resistance
Rout
48
50
62
ohm
-
AC/Optical and Electrical Characteristics( Tc=25ºC)
Parameter
Symbol
Detection Range
Gain @ 10 Mbps Differential
Pin Assignment
Pin Assignment
PIN-TIA Pin Assignment
LD Pin Assignment
Vcc(+3.3V)
1
D Type
Pin 1 : Laser Anode and Monitor Diode Cathode
Pin 2 : Case Gnd
Pin 3 : Laser Cathode
Pin 4 : Monitor Diode Anode
3
PD
LD
DOUT
4
GND
Functional Schematic
(CASE)
LUMINENTOIC.COM
2
DOUT
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
2
LUMNDS1546-FEB0906
rev. A.0
1310nm Emitting , 1490nm Receiving (PIN-TIA, 3.3V),
Bi-directional Diplexer Optical Module
C-13/14-F06-BD-SXXL-XX
Outline Demensions
Units in mm.
Part Number: C-13/14-F06-BD-SLCL-XX
Top view
Left side view
Front view
DIMENSION : A:6.9~7.5
Part Number: C-13/14-F06-BD-SSCL-XX
A
DIMENSION A: 7.2~7.8mm
LUMINENTOIC.COM
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
3
LUMNDS1546-FEB0906
rev. A.0
1310nm Emitting , 1490nm Receiving (PIN-TIA, 3.3V),
Bi-directional Diplexer Optical Module
C-13/14-F06-BD-SXXL-XX
Ordering Information
1310nm Transmitter
1490nm Receiver
06: 1250Mb/s PIN-TIA+3.3V
Package
Connector
B=BOSA
SC/LC
Pin Assignment
Fiber Output Power
D =D Type
L
Fiber Application
S= 9/125µm
RoHS Compliant
-/G5/GR
Blank = RoHS non-compliant product
G5 = RoHS 5/6-compliant product (lead exemption)
GR = Full RoHS compliant product (no exemption)
Warnings
Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD). A static free environment is highly recommended.
Follow guidelines according to proper ESD procedures.
Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirect radiation.
Legal Notice
IMPORTANT NOTICE!
All information contained in this document is subject to change without notice, at LuminentOIC’s sole and absolute discretion. LuminentOIC warrants
performance of its products to current specifications only in accordance with the company’s standard one-year warranty; however, specifications designated
as “preliminary” are given to describe components only, and LuminentOIC expressly disclaims any and all warranties for said products, including express,
implied, and statutory warranties, warranties of merchantability, fitness for a particular purpose, and non-infringement of proprietary rights. Please refer to
the company’s Terms and Conditions of Sale for further warranty information.
LuminentOIC assumes no liability for applications assistance, customer product design, software performance, or infringement of patents, services, or
intellectual property described herein. No license, either express or implied, is granted under any patent right, copyright, or intellectual property right, and
LuminentOIC makes no representations or warranties that the product(s) described herein are free from patent, copyright, or intellectual property rights.
Products described in this document are NOT intended for use in implantation or other life support applications where malfunction may result in injury
or death to persons. LuminentOIC customers using or selling products for use in such applications do so at their own risk and agree to fully defend and
indemnify LuminentOIC for any damages resulting from such use or sale.
THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN “AS IS” BASIS. Customer agrees that LuminentOIC is not liable for any actual,
consequential, exemplary, or other damages arising directly or indirectly from any use of the information contained in this document. Customer must contact LuminentOIC to obtain the latest version of this publication to verify, before placing any order, that the information contained herein is current.
© LuminentOIC, Inc. 2006
All rights reserved
LUMINENTOIC.COM
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
4
LUMNDS1546-FEB0906
rev. A.0
Similar pages