DS26LV32AT www.ti.com SNLS128C – APRIL 1999 – REVISED FEBRUARY 2013 DS26LV32AT 3V Enhanced CMOS Quad Differential Line Receiver Check for Samples: DS26LV32AT FEATURES 1 • • 2 • • • • • • • • • • Low Power CMOS Design (30 mW typical) Interoperable with Existing 5V RS-422 Networks Industrial and Military Temperature Range Conforms to TIA/EIA-422-B (RS-422) and ITU-T V.11 Recommendation 3.3V Operation ±7V Common Mode Range @ VID = 3V ±10V Common Mode Range @ VID = 0.2V Receiver OPEN Input Failsafe Feature Guaranteed AC Parameter: – Maximum Receiver Skew: 4 ns – Maximum Transition Time: 10 ns Pin Compatible with DS26C32AT 32 MHz Toggle Frequency > 6.5k ESD Tolerance (HBM) • • Available in SOIC and CLGA Packaging Standard Microcircuit Drawing (SMD) 596298585 DESCRIPTION The DS26LV32A is a high speed quad differential CMOS receiver that meets the requirements of both TIA/EIA-422-B and ITU-T V.11. The CMOS DS26LV32AT features typical low static ICC of 9 mA which makes it ideal for battery powered and power conscious applications. The TRI-STATE enables, EN and EN*, allow the device to be active High or active Low. The enables are common to all four receivers. The receiver output (RO) is guaranteed to be High when the inputs are left open. The receiver can detect signals as low as ±200 mV over the common mode range of ±10V. The receiver outputs (RO) are compatible with TTL and LVCMOS levels. Connection Diagram Top View Figure 1. SOIC Package See Package Numbers D0016A or NAD0016A 1 2 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. All trademarks are the property of their respective owners. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 1999–2013, Texas Instruments Incorporated DS26LV32AT SNLS128C – APRIL 1999 – REVISED FEBRUARY 2013 www.ti.com Truth Table (1) Inputs Output EN Enables EN* RI+–RI− RO L H X Z VID ≥ +0.2V H All other combinations of enable inputs (1) (2) VID ≤ −0.2V L Open (2) H L = Logic Low H = Logic High X = Irrelevant Z = TRI-STATE Open, not terminated These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. Absolute Maximum Ratings (1) (2) −0.5V to +7V Supply Voltage (VCC) −0.5V to VCC +0.5V Enable Input Voltage (EN, EN*) Receiver Input Voltage (VID: RI+, RI−) ±14V Receiver Input Voltage (VCM: RI+, RI−) ±14V Receiver Output Voltage (RO) −0.5V to VCC +0.5V Receiver Output Current (RO) ±25 mA Maximum Maximum Package Power Dissipation @ +25°C D0016A Package 1190 mW NAD0016A Package 1087 mW Derate D0016A Package 9.8 mW/°C above +25°C Derate NAD0016A Package 7.3 mW/°C above +25°C −65°C to +150°C Storage Temperature Range Lead Temperature Range Soldering (4 Sec.) +260°C ESD Ratings (HBM, 1.5 kΩ, 100 pF) ≥ 6.5 kV Receiver Inputs and Enables ≥ 2 kV Other Pins (1) (2) “Absolute Maximum ratings” are those values beyond which the safety of the device cannot be guaranteed. They are not meant to imply that the devices should be operated at these limits. The Electrical Characteristics specifies conditions of device operation. If Military/Aerospace specified devices are required, please contact the TI Sales Office/Distributors for availability and specifications. Recommended Operating Conditions Min Typ Max Units 3.0 3.3 3.6 V DS26LV32AT −40 +25 +85 °C DS26LV32AW −55 +25 +125 °C Supply Voltage (VCC) Operating Free Air Temperature Range (TA) 2 Submit Documentation Feedback Copyright © 1999–2013, Texas Instruments Incorporated Product Folder Links: DS26LV32AT DS26LV32AT www.ti.com SNLS128C – APRIL 1999 – REVISED FEBRUARY 2013 Electrical Characteristics (1) (2) Over Supply Voltage and Operating Temperature ranges, unless otherwise specified. Parameter VTH Differential Input Threshold Test Conditions VOUT = VOH or VOL VCM = −7V to +7V, TA = -40°C to +85°C VCM = −0.5V to +5.5V, TA = -55°C to +125°C (3) VHY Hysteresis VIH Minimum High Level Input Voltage VIL Maximum Low Level Input Voltage RIN Input Resistance Pin RI+, RI− VIN = −7V, +7V, TA = -40°C to +85°C (Other Input = GND) −200 ±17.5 +200 mV +200 mV -200 TA = -40°C to +85°C V 0.8 5.0 8.5 kΩ VIN = +3V Power On, or VIN = 0.5V VCC = 0V) VIN = −3V 0 −0.43 VIN = −10V 0 −1.26 RI+, RI− TA = -55°C to +125°C (3) VIN = 0V to VCC VOH High Level Output Voltage IOH = −6 mA, VID = +1V High Level Output Voltage 0 1.1 0 0.27 mA −0.02 mA VOL Low Level Output Voltage IOL = +6 mA, VID = −1V IOZ Output TRI-STATE Leakage Current VOUT = VCC or GND ISC Output Short Circuit Current VO = 0V, VID ≥ |200 mV| ICC Power Supply Current No Load, All RI+, R1− = OPEN, EN, EN* = VCC or GND mA mA 0 1.8 mA ±1 μA RO 3 V VCC −0.1 V 0.13 0.5 V ±50 μA −35 −70 mA 9 15 mA 20 mA EN = VIL, EN* = VIH TA = -40°C to +85°C TA = -55°C to +125°C −10 VCC mA -1.8 2.4 (4) mA 0 IOH = −100 μA, VID = +1V IOH = − 100 μA, VID = OPEN 1.8 −2.2 EN, EN* IOH = −6 mA, VID = OPEN V kΩ 5.0 VIN = +10V Input Current mV 2.0 (Other Input = 0V, IEN (2) (3) (4) Units Input Current VIN = 5.5V (1) Max 35 EN, EN* VIN = −0.5V VOH Typ VCM = 1.5V VIN = −0.5V, +5.5V, TA = -55°C to +125°C (Other Input = GND) (3) IIN Min Current into device pins is defined as positive. Current out of device pins is defined as negative. All voltages are referenced to ground except VID. All typicals are given for: VCC = +3.3V, TA = +25°C. This parameter does not meet the TIA/EIA-422-B specification. Short one output at a time to ground. Do not exceed package. Submit Documentation Feedback Copyright © 1999–2013, Texas Instruments Incorporated Product Folder Links: DS26LV32AT 3 DS26LV32AT SNLS128C – APRIL 1999 – REVISED FEBRUARY 2013 www.ti.com Switching Characteristics - Industrial (1) (2) Over Supply Voltage and -40°C to +85°C Operating Temperature range, unless otherwise specified. Parameter Test Conditions Typ Max Units 6 17.5 35 ns 6 17.8 35 ns tPHL Propagation Delay High to Low tPLH Propagation Delay Low to High tr Rise Time (20% to 80%) 4.1 10 ns tf Fall Time (80% to 20%) 3.3 10 ns tPHZ Disable Time 40 ns tPLZ Disable Time 40 ns tPZH Enable Time 40 ns tPZL Enable Time tSK1 Skew, |tPHL − tPLH| tSK2 Skew, Pin to Pin CL = 50 pF, VCM = 1.5V (Figure 4 and Figure 5) (3) 40 ns 0.3 4 ns 0.6 4 ns 7 17 (2) Skew, Part to Part fMAX Maximum Operating Frequency (3) (4) (5) CL = 15 pF, VCM = 1.5V (4) tSK3 (1) (2) CL = 15 pF, VCM = 1.5V (Figure 2 and Figure 3) Min (5) CL = 15 pF, VCM = 1.5V 32 ns MHz All typicals are given for: VCC = +3.3V, TA = +25°C. tSK3 is the difference in propagation delay times between any channels of any devices. This specification (maximum limit) applies to devices within VCC ±0.1V of one another, and a Delta TA = ±5°C (between devices) within the operating temperature range. This parameter is guaranteed by design and characterization. tSK1 is the |tPHL – tPLH| of a channel. tSK2 is the maximum skew between any two channels within a device, either edge. All channels switching, Output Duty Cycle criteria is 40%/60% measured at 50%. Input = 1V to 2V, 50% Duty Cycle, tr/tf ≤ 5 ns. This parameter is guaranteed by design and characterization. Switching Characteristics - Military Over Supply Voltage and -55°C to +125°C Operating Temperature range, unless otherwise specified. Parameter Test Conditions Min Max Units 6 45 ns 6 45 ns 50 ns 50 ns Enable Time 50 ns Enable Time 50 ns 6 ns 6 ns tPHL Propagation Delay High to Low tPLH Propagation Delay Low to High tPHZ Disable Time tPLZ Disable Time tPZH tPZL CL = 50 pF, VCM = 1.5V (Figure 4 and Figure 5) tSK1 Skew, |tPHL − tPLH| tSK2 Skew, Pin to Pin (1) (2) 4 CL = 50 pF, VCM = 1.5V (Figure 2 and Figure 3) (1) CL = 50 pF, VCM = 1.5V (2) tSK1 is the |tPHL – tPLH| of a channel. tSK2 is the maximum skew between any two channels within a device, either edge. Submit Documentation Feedback Copyright © 1999–2013, Texas Instruments Incorporated Product Folder Links: DS26LV32AT DS26LV32AT www.ti.com SNLS128C – APRIL 1999 – REVISED FEBRUARY 2013 PARAMETER MEASUREMENT INFORMATION A. Generator waveform for all tests unless otherwise specified: f = 1 MHz, Duty Cycle = 50%, ZO = 50Ω, tr ≤ 10 ns, tf ≤ 10 ns. B. CL includes probe and jig capacitance. Figure 2. Receiver Propagation Delay and Transition Time Test Circuit A. Generator waveform for all tests unless otherwise specified: f = 1 MHz, Duty Cycle = 50%, ZO = 50Ω, tr ≤ 10 ns, tf ≤ 10 ns. B. CL includes probe and jig capacitance. C. For military grade product, tr ≤ 6ns and tf ≤ 6ns. D. For military grade product the measure point is 1/2 VCC for tPLH, tPHL, tPZL, and tPZH. Figure 3. Receiver Propagation Delay and Transition Time Waveform Figure 4. Receiver TRI-STATE Test Circuit Submit Documentation Feedback Copyright © 1999–2013, Texas Instruments Incorporated Product Folder Links: DS26LV32AT 5 DS26LV32AT SNLS128C – APRIL 1999 – REVISED FEBRUARY 2013 www.ti.com A. Generator waveform for all tests unless otherwise specified: f = 1 MHz, Duty Cycle = 50%, ZO = 50Ω, tr ≤ 10 ns, tf ≤ 10 ns. B. CL includes probe and jig capacitance. C. For military grade product, tr ≤ 6ns and tf ≤ 6ns. D. For military grade product the measure point is 1/2 VCC for tPLH, tPHL, tPZL, and tPZH. Figure 5. Receiver TRI-STATE Output Enable and Disable Waveforms 6 Submit Documentation Feedback Copyright © 1999–2013, Texas Instruments Incorporated Product Folder Links: DS26LV32AT DS26LV32AT www.ti.com SNLS128C – APRIL 1999 – REVISED FEBRUARY 2013 TYPICAL APPLICATION INFORMATION General application guidelines and hints for differential drivers and receivers may be found in the following application notes: • AN-214 • AN-457 • AN-805 • AN-847 • AN-903 • AN-912 • AN-916 Power Decoupling Recommendations: Bypass caps must be used on power pins. High frequency ceramic (surface mount is recommended) 0.1 μF in parallel with 0.01 μF at the power supply pin. A 10 μF or greater solid tantalum or electrolytic should be connected at the power entry point on the printed circuit board. RT is optional although highly recommended to reduce reflection Figure 6. Typical Receiver Connections Figure 7. Typical Receiver Output Waveforms Submit Documentation Feedback Copyright © 1999–2013, Texas Instruments Incorporated Product Folder Links: DS26LV32AT 7 DS26LV32AT SNLS128C – APRIL 1999 – REVISED FEBRUARY 2013 www.ti.com Figure 8. Typical Receiver Input Circuit Figure 9. Typical ICC vs Frequency Figure 10. Receiver IIN vs VIN (Power On or Power Off) 8 Submit Documentation Feedback Copyright © 1999–2013, Texas Instruments Incorporated Product Folder Links: DS26LV32AT DS26LV32AT www.ti.com SNLS128C – APRIL 1999 – REVISED FEBRUARY 2013 Figure 11. IOL vs VOL Figure 12. IOH vs VOH Submit Documentation Feedback Copyright © 1999–2013, Texas Instruments Incorporated Product Folder Links: DS26LV32AT 9 DS26LV32AT SNLS128C – APRIL 1999 – REVISED FEBRUARY 2013 www.ti.com REVISION HISTORY Changes from Revision B (February 2013) to Revision C • 10 Page Changed layout of National Data Sheet to TI format ............................................................................................................ 9 Submit Documentation Feedback Copyright © 1999–2013, Texas Instruments Incorporated Product Folder Links: DS26LV32AT PACKAGE OPTION ADDENDUM www.ti.com 1-Nov-2013 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (°C) Device Marking (4/5) DS26LV32ATM NRND SOIC D 16 48 TBD Call TI Call TI -40 to 85 DS26LV32A TM DS26LV32ATM/NOPB ACTIVE SOIC D 16 48 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 85 DS26LV32A TM DS26LV32ATMX NRND SOIC D 16 2500 TBD Call TI Call TI -40 to 85 DS26LV32A TM DS26LV32ATMX/NOPB ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) SN | CU SN Level-1-260C-UNLIM -40 to 85 DS26LV32A TM (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. (6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish value exceeds the maximum column width. Addendum-Page 1 Samples PACKAGE OPTION ADDENDUM www.ti.com 1-Nov-2013 Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2 PACKAGE MATERIALS INFORMATION www.ti.com 26-Mar-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant DS26LV32ATMX SOIC D 16 2500 330.0 16.4 6.5 10.3 2.3 8.0 16.0 Q1 DS26LV32ATMX/NOPB SOIC D 16 2500 330.0 16.4 6.5 10.3 2.3 8.0 16.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 26-Mar-2013 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) DS26LV32ATMX SOIC D 16 2500 367.0 367.0 35.0 DS26LV32ATMX/NOPB SOIC D 16 2500 367.0 367.0 35.0 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of non-designated products, TI will not be responsible for any failure to meet ISO/TS16949. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2013, Texas Instruments Incorporated