ERK610 • Ceramic AC Capacitors • Class X1, 440V AC/Class Y2, 300VAC TYPICAL APPLICATIONS For worldwide use as electromagnetic interference suppressor in all X1 and Y2 applications. CONSTRUCTION Disc capacitors with epoxy coating. Epoxy dipped, insulating, flame retarding according to UL 94V-0. TECHNICAL DATA Rated voltage UR (IEC 60384-14.2) X1 440 VAC, 50 Hz Y2 300 VAC, 50 Hz Capacitance range 33-4700 pF Capacitance tolerance ± 10%,± 20% Temperature range (-40 to +125)°C Climatic category IEC 40/125/21 Approvals VDE, UL, CSA Dissipation factor tanδ ≤ 25 • 10 -3 Test voltage between terminals Component test: 2600 VAC, 50 Hz,2 s As repeated test admissible only once with 2340 VAC, 50 Hz,2 s Random sampling test (destructive test): 2600 VAC, 50 Hz,60 s Dielectric strength of body insulation 2600 VAC, 50 Hz,60 s (destructive test) Insulation resistance ≥ 6 • 10 9 Ω Taping and special lead configurations On request Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute – and we specifically disclaim – any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained. ERK610 ARTICLE TABLE Capacitance pF 33 47 68 100 150 220 330 470 680 1000 1500 2200 3300 3900 4700 Dimensions D x s Max (mm) 8.0 x 6.0 8.0 x 6.0 8.0 x 6.0 8.0 x 6.0 8.0 x 6.0 8.0 x 6.0 8.0 x 6.0 8.0 x 6.0 9.0 x 6.0 7.0 x 4.5 8.0 x 4.5 10.0 x 4.5 11.5 x 4.5 14.0 x 4.5 14.0 x 4.5 p±1* (mm) d±0.05* (mm) V±0.5* (mm) 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 1.6 1.6 1.9 1.9 1.9 1.9 1.9 1.9 2.0 1.6 1.6 1.6 1.6 1.6 1.6 Article code 1st block Ceramic dielectric ERK610RK2330M ERK610RK2470M ERK610RK2680M ERK610RK3100M ERK610RK3150M ERK610RK3220M ERK610RK3330M ERK610RK3470M ERK610RK3680M ERK610RK4100M ERK610RK4150M ERK610RK4220M ERK610RK4330M ERK610RK4390M ERK610RK4470M N 750 N 750 K 1200 K 1500 K 2000 K 2000 K 2000 K 4000 K 4000 K 6000 K 6000 K 6000 K 6000 K 6000 K 6000 * Standard lead configuration, other lead spacing and diameter available on request. MARKING APPROVALS/REFERENCE DOCUMENTS Certification Body Specification Approval reference VDE UL EN 132400 UL 1414 (UR = 250 VAC) 40001991, 40001992 E73869 CSA (cUL recognition) C 22.2 No. 1-M90 (UR=250 VAC) 216038 2.2 nF to 4.7 nF 33 pF to 1.5 nF ERK 2n2 M IEC 384-14/2 440 300 250~ X1 Y2 c � us ERK 440~X1 300~Y2 33p M All approval marks are also shown on the label. ORDERING INFORMATION Article code 1st block 2nd block See article table Pos. 13 Capacitance tolerance code: M = ± 20% standard K = ± 10% option See separate brochure: Ceramic Disc, EMI and Safety Capacitors, General information Page 5 See article table and page 19 in the Evox Rifa Film Capacitors 2003 catalogue. For options, see Ceramic Disc, EMI and Safety Capacitors, General information, Page 5. PACKING The box dimensions for bulk packaging are 245 x 145 x 80 mm. Quantity/package as per article table. Reels with taped capacitors are packed 10 in a box with dimension 370 x 370 x 560 mm. Quantity/reel according to article table. The standard quantity/reel is for 360 mm reel. If 500 mm reel is required, it must be specified when ordering and the quantity is 2 x the given quantity. DATA SHEET ERK610 Specifications subject to change without notice © KEMET Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute – and we specifically disclaim – any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.