Roithner AB081Q60W High power single bar qcw infrared laser diode Datasheet

AB081Q60W
TECHNICAL DATA
High Power Single Bar QCW Infrared Laser Diode
Features
Applications
•
•
•
•
•
•
•
Output Power: 60 W
780-830 nm Emission Wavelength
Spectral Width: ≤3 nm
High Reliability, High Efficiency
Laser Pumping
Medical Usage
Printing
Specifications (25°C)
Item
Optical Specifications
QCW Output Power
Array Length
Center Wavelength
Wavelength Tolerance
Spectral Width
Emitting Area
Emitter Pitch
Number of Emitters
Wavelength Temperature Coefficient
Beam Divergence
Electrical Specifications
Slope Efficiency
Conversion Efficiency
Threshold Current
Operating Current
Operating Voltage
Absolute Maximum Ratings
Reverse Voltage
Operating Temperature
Storage Temperature
20.09.2010
Symbol
Value
Unit
PO
L
λC
W
mm
nm
nm
nm
µm
µm
θ┴×θ║
60
10
780-830
±5
≤3
80 x 1
100
100
0.3
40x8
ES
NS
ITH
IF
UF
≥1
≥ 40%
≤ 20
≤ 75
≤2
W/A
UR
TOP
TSTG
2.5
+10 … +40
-40 ... +85
V
°C
°C
Δλ
WxH
AB081Q60W
nm/°C
deg
A
A
V
1 of 3
Package Dimensons
Unit:mm
Typical Performance Curves
20.09.2010
AB081Q60W
2 of 3
Notes
1. High power laser diode arrays are high energy laser devices. It is harmful to human body
and health. Never look directly into the laser output port!
2. The storage temperature is between –40 and 85 °C.
3. In generally, the lifetime can be shortened by high temperature. So the generated heat
must be removed in time when the LD is working. The water cooling system, forced air
cooling or TEC system are recommended to keeping the LD at a suitable temperature.
4. Constant-current power supply with voltage regulator should be used to avoid surge. To
use a laser diode in following sequences: Turn on the power supply; connect to the laser
diode; increase the current gradually, and then turn off the power. Please make sure that
the power supply has no current overshoot at any time. The current overshoot can
damage the laser diodes permanently.
5. The high power laser diode arrays are very sensitive to electrostatic. Please wear
anti-static bracelet during operating with the laser diode arrays.
6. Be sure that the operating current does not exceed the specified operating current.
Otherwise it will accelerate laser aging, shorten lifetime or even damage devices
permanently.
7. A clean, dry and ventilated environment should be available when storing and operating
laser diode arrays. Dust may degrade the laser diode arrays.
20.09.2010
AB081Q60W
3 of 3
Similar pages