Aluminum Electrolytic Capacitors (Radial Lead Type) Radial Lead Type Series : GA (Bi-polar) Type : A Features ● Endurance ● RoHS : 105 °C 1000 h to 2000 h compliant Specifications Category temperature range –40 °C to +105 °C Rated voltage range 6.3 V.DC to 50 V.DC Capacitance range 2.2 µF to 330 µF Capacitance tolerance ±20 % (120 Hz/+20 °C) I < 0.03 CV +3 (µA) After 2 minutes Leakage current or I < 0.03 CV or 3 (µA) After 5 minutes (Whichever is greater) Dissipation factor (tan d) Please see the attached characteristics list After following life test of DC working voltage at +105 °C±2 °C when the capacitors are restored to 20 °C, the capacitors shall meet the following limits. Duration 05 to 08 : 1000 hours (500 hours for each polarity) Endurance 010 : 2000 hours (1000 hours for each polarity) Capacitance change Within ±20 % of the initial value < 200 % of the initial limit tan d DC leakage current Within the initial limit After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) Shelf life Frequency correction factor for ripple current Frequency (Hz) 50, 60 120 1k 10 k to Correction factor 0.70 1.00 1.30 1.70 fd±0.05 Dimensions L✽ 14 min. < 08 0D±0.5 3 min. 010 < F±0.5 Sleeve Pressure relief 06.3 < 0D±0.5 ✽ L < 16 : L±1.0 L > 20 : L±2.0 (Unit : mm) 0D 5 6.3 8 10 0d 0.5 0.5 0.6 0.6 F 2.0 2.5 3.5 5.0 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04 Mar. 2016 Aluminum Electrolytic Capacitors (Radial Lead Type) Characteristics list (Bi-polar) Endurance : 105 °C 05 to 08=1000 h (500 h for each polarity), 010=2000 h (1000 h for each polarity) Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 6.3 10 16 25 35 L 100 6.3 11.2 330 8 11.5 47 5 11 Lead length (mm) Min. Packaging Q'ty Lead space Lead dia. 0d Part No. Taping Taping Straight ✽B ✽i 0.5 2.5 5.0 250 0.30 0.6 3.5 5.0 90 0.24 0.5 2.0 5.0 2.5 2.5 Straight Taping leads (pcs) (pcs) ECA0JEN101( ) 200 2000 ECA0JEN331( ) 200 1000 ECA1AEN470( ) 200 2000 10 5 11 40 0.20 0.5 2.0 5.0 2.5 ECA1CEN100( ) 200 2000 22 5 11 60 0.20 0.5 2.0 5.0 2.5 ECA1CEN220( ) 200 2000 33 5 11 80 0.20 0.5 2.0 5.0 2.5 ECA1CEN330( ) 200 2000 47 6.3 11.2 100 0.20 0.5 2.5 5.0 2.5 ECA1CEN470( ) 200 2000 10 5 11 45 0.15 0.5 2.0 5.0 2.5 ECA1EEN100( ) 200 2000 22 6.3 11.2 60 0.15 0.5 2.5 5.0 2.5 ECA1EEN220( ) 200 2000 33 6.3 11.2 90 0.15 0.5 2.5 5.0 2.5 ECA1EEN330( ) 200 2000 47 6.3 11.2 110 0.15 0.5 2.5 5.0 2.5 ECA1EEN470( ) 200 2000 100 8 11.5 180 0.15 0.6 3.5 5.0 ECA1EEN101( ) 200 1000 33 8 11.5 100 0.15 0.6 3.5 5.0 ECA1VEN330( ) 200 1000 100 10 16 230 0.15 0.6 5.0 5.0 ECA1VEN101( ) 200 500 2.2 5 11 18 0.15 0.5 2.0 5.0 2.5 ECA1HEN2R2( ) 200 2000 3.3 5 11 25 0.15 0.5 2.0 5.0 2.5 ECA1HEN3R3( ) 200 2000 5 11 30 0.15 0.5 2.0 5.0 2.5 ECA1HEN4R7( ) 200 2000 6.3 11.2 50 0.15 0.5 2.5 5.0 2.5 ECA1HEN100( ) 200 2000 4.7 50 0D Specification Ripple current tan d (120 Hz) (120 Hz) (+105 °C) (+20 °C) (mA r.m.s.) 130 0.30 10 22 8 11.5 90 0.15 0.6 3.5 5.0 ECA1HEN220( ) 200 1000 33 8 11.5 110 0.15 0.6 3.5 5.0 ECA1HEN330( ) 200 1000 47 10 12.5 140 0.15 0.6 5.0 5.0 ECA1HEN470( ) 200 500 100 10 20 250 0.15 0.6 5.0 5.0 ECA1HEN101( ) 200 500 · When requesting taped product, please put the letter “B” or “i” between the “( )”. Lead wire pitch ✽B=5 mm, 7.5 mm, i=2.5 mm. · Please refer to the page of “Taping dimensions”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04 Mar. 2016