P-DUKE FDC05-48D15 5 watts output power Datasheet

FEATURES
• 5 WATTS OUTPUT POWER
• OUTPUT CURRENT UP TO 1000mA
• STANDARD 2.0 X 1.0 X 0.4 INCH PACKAGE
• HIGH EFFICIENCY UP TO 83%
• 2:1 AND 4:1 WIDE INPUT VOLTAGE RANGE
• SIX-SIDED CONTINUOUS SHIELD
• FIXED SWITCHING FREQUENCY
• CE MARK MEETS 2006/95/EC, 93/68/EEC AND 2004/108/EC
• UL60950-1, EN60950-1 AND IEC60950-1 LICENSED
• ISO9001 CERTIFIED MANUFACTURING FACILITIES
• COMPLIANT TO RoHS EU DIRECTIVE 2002/95/EC
OPTIONS
APPLICATIONS
Wireless Network
Telecom/Datacom
Industry Control System
Measurement Equipment
Semiconductor Equipment
Negative & Positive logic Remote On/Off
DESCRIPTION
The FDC05 and FDC05-W series offer 5 watts of output power from a 2 x
1 x 0.4 inch package without derating to 71ºC ambient temperature.
FDC05 series have 2:1 wide input voltage of 9-18, 18-36 and 36-75VDC.
FDC05-W series have 4:1 ultra wide input voltage of 9-36 and 18-75VDC.
T E C H N I C A L S P E C I F I C AT I O N
All specifications are typical at nominal input, full load and 25ºC otherwise noted
OUTPUT SPECIFICATIONS
INPUT SPECIFICATIONS
Output power
Voltage accuracy
Minimum load
Line regulation
5 Watts, max.
Full load and nominal Vin
± 1%
0%
LL to HL at Full Load
± 0.2%
Single
± 0.2%
Load regulation
No load to Full load
Dual
± 1%
Cross regulation (Dual) Asymmetrical load 25% / 100% FL
± 5%
Ripple and noise
20MHz bandwidth
See table
Temperature coefficient
±0.02% / ºC, max.
Transient response
25% load step change
Single 200μS
recovery time
FL to 1/2 FL ±1% error band
Dual 200μS
Over load protection
% of FL at nominal input
170%, typ.
Short circuit protection
Continuous, automatics recovery
GENERAL SPECIFICATIONS
Efficiency
Isolation Voltage
See table
Input to Output to Case
Isolation resistance
Isolation capacitance
Switching frequency
Approvals and standard
1600VDC, min.
9
10 ohms, min.
300pF, max.
Standard
300KHz, typ.
“W” series
200KHz, typ.
IEC60950-1, UL60950-1, EN60950-1
Case material
Nickel-coated copper
Base material
Non-conducted black plastic
Potting material
Dimensions
Weight
MTBF (Note 1)
Epoxy (UL94-V0)
2.00 X 1.00 X 0.40 Inch
(50.8 X 25.4 X 10.2 mm)
27g (0.95oz)
6
BELLCORE TR-NWT-000332 3.145 x 10 hrs
6
MIL-HDBK-217F
2.326 x 10 hrs
FDC05
12V nominal input
9 – 18VDC
24V nominal input
18 – 36VDC
Input voltage range
48V nominal input
36 – 75VDC
FDC05-W 24V nominal input
9 – 36VDC
48V nominal input
18 – 75VDC
Input filter
Pi type
12V input
36VDC
Input surge voltage 100mS max
24V input
50VDC
48V input
100VDC
Input reflected ripple current Nominal Vin and full load
20mAp-p
Nominal Vin and
Power up
450mS, max.
Start up time
Constant resistive load
Remote ON/OFF (Option) (Note 6)
(Positive logic)
DC-DC ON
Open or 3.5V < Vr < 12V
DC-DC OFF
Short or 0V < Vr < 1.2V
(Negative logic)
DC-DC ON
Short or 0V < Vr < 1.2V
Open or 3.5V < Vr < 12V
DC-DC OFF
Input current of remote control pin
Nominal Vin
-0.5mA ~ +1mA
Remote off state input current
Nominal Vin
2.5mA
ENVIRONMENTAL SPECIFICATIONS
Operating ambient
Standard
-25ºC ~ +85ºC (with derating)
temperature
M1 (Note 7)
-40ºC ~ +85ºC (non-derating)
(Reference derating curve) M2 (W series) -40ºC ~ +85ºC (with derating)
Maximum case temperature
+100ºC
Storage temperature range
-55ºC ~ +105ºC
Nature convection
12ºC/watt
Thermal impedance (Note 8)
Nature convection with heat-sink 10ºC/watt
Thermal shock
MIL-STD-810F
Vibration
MIL-STD-810F
Relative humidity
5% to 95% RH
EMC CHARACTERISTICS
EMI
ESD
EN55022
EN61000-4-2
Radiated immunity
EN61000-4-3
Fast transient (Note 9) EN61000-4-4
Surge (Note 9)
Conducted immunity
EN61000-4-5
EN61000-4-6
Class A
Air
Contact
± 8KV
Perf. Criteria B
± 6KV
10 V/m Perf. Criteria A
± 2KV Perf. Criteria B
± 1KV Perf. Criteria B
10 Vr.m.s Perf. Criteria A
Page 1 of 2 Issued Date:2008/05/21
Output Current
Input Current
(4)
Output
Output
Eff (4) Capacitor
No load Full load
(%) Load max(5)
Voltage Min. load Full load Ripple & Noise
(3)
(2)
Model
Number
Input
Range
FDC05-12S33
FDC05-12S05
FDC05-12S12
FDC05-12S15
FDC05-12D05
FDC05-12D12
FDC05-12D15
FDC05-24S33 (W)
FDC05-24S05 (W)
FDC05-24S12 (W)
FDC05-24S15 (W)
FDC05-24D05 (W)
FDC05-24D12 (W)
FDC05-24D15 (W)
FDC05-48S33 (W)
FDC05-48S05 (W)
FDC05-48S12 (W)
FDC05-48S15 (W)
FDC05-48D05 (W)
FDC05-48D12 (W)
FDC05-48D15 (W)
9 – 18 VDC
9 – 18 VDC
9 – 18 VDC
9 – 18 VDC
9 – 18 VDC
9 – 18 VDC
9 – 18 VDC
18 – 36 (9 – 36) VDC
18 – 36 (9 – 36) VDC
18 – 36 (9 – 36) VDC
18 – 36 (9 – 36) VDC
18 – 36 (9 – 36) VDC
18 – 36 (9 – 36) VDC
18 – 36 (9 – 36) VDC
36 – 75 (18 – 75) VDC
36 – 75 (18 – 75) VDC
36 – 75 (18 – 75) VDC
36 – 75 (18 – 75) VDC
36 – 75 (18 – 75) VDC
36 – 75 (18 – 75) VDC
36 – 75 (18 – 75) VDC
3.3 VDC
5 VDC
12 VDC
15 VDC
± 5 VDC
± 12 VDC
± 15 VDC
3.3 VDC
5 VDC
12 VDC
15 VDC
± 5 VDC
± 12 VDC
± 15 VDC
3.3 VDC
5 VDC
12 VDC
15 VDC
± 5 VDC
± 12 VDC
± 15 VDC
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
1000mA
1000mA
470mA
400mA
± 500mA
± 230mA
± 190mA
1000mA
1000mA
470mA
400mA
± 500mA
± 230mA
± 190mA
1000mA
1000mA
470mA
400mA
± 500mA
± 230mA
± 190mA
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
10mA
10mA
10mA
15mA
20mA
15mA
20mA
15(5mA)
15(5mA)
10(5mA)
20(5mA)
15(5mA)
20(5mA)
20(10mA)
5(5mA)
10(10mA)
10(10mA)
10(10mA)
10(5mA)
10(10mA)
10(10mA)
382mA
556mA
610mA
658mA
556mA
597mA
609mA
199 (188mA)
282 (274mA)
305 (301mA)
325 (325mA)
278 (274mA)
295 (295mA)
308 (301mA)
100 (100mA)
145 (145mA)
151 (151mA)
160 (163mA)
141 (141mA)
149 (149mA)
154 (154mA)
76
79
81
80
79
81
82
73 (77)
78 (80)
81 (82)
81 (81)
79 (80)
82 (82)
81 (83)
73 (73)
76 (76)
82 (82)
82 (81)
78 (78)
81 (81)
81 (81)
3700μF
1700μF
290μF
188μF
± 850μF
± 140μF
± 47μF
3700μF
1700μF
290μF
188μF
± 850μF
± 140μF
± 47μF
3700μF
1700μF
290μF
188μF
± 850μF
± 140μF
± 47μF
Note
BELLCORE TR-NWT-000332. Case 1: 50% Stress, Temperature at 40ºC.
MIL-HDBK-217F Notice2 @Ta=25 ºC, Full load(Ground, Benign, controlled environment).
Maximum value at nominal input voltage and full load of standard type.
Typical value at nominal input voltage and no load.
Typical value at nominal input voltage and full load.
Test by minimum Vin and constant resistive load.
The ON/OFF control pin voltage is referenced to -Vin
To order positive logic ON/OFF control add the suffix-P (Ex: FDC05-48S05-P)
To order negative logic ON/OFF control add the suffix-N (Ex: FDC05-48S05-N)
M1 version is more efficient, therefore, it can be operated in a more extensive temperature range
than standard and M2 version.
Heat sink is optional and P/N: 7G-0020C-F.
An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5.
The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220μF/100V, ESR 48mΩ.
2.
3.
4.
5.
6.
7.
8.
9.
FDC05-48S05 Derating Curve
FDC05-48S05 Derating Curve
With Heatsink (Note 58))
OUTPUT POWER(%)
OUTPUT POWER (%)
120
100
80
60
40
20
0
120
100
80
60
40
20
0
-40 -25 -10 5
81 95 110
-40 -25 -10 5 20 35 50 65 80
AMBIENT TEMPERATURE(℃)
EFFICIENCY(%)
FDC05-48S05
Efficiency VS Input Voltage
83
81
79
77
75
73
71
69
36
40
44
48
52
56
60
INPUT VOLTAGE (V)
64
68
72
84
20 35 50 65 80 95 110
1. All dimensions in Inches (mm)
Tolerance: X.XX±0.02 (X.X±0.5)
X.XXX±0.01 (X.XX±0.25)
2. Pin pitch tolerance ±0.01(0.25)
3. Pin dimension tolerance ±0.004 (0.1)
AMBIENT TEMPERATURE(℃)
EFFICIENCY(%)
1.
90
85
80
75
70
65
60
55
50
45
40
PIN CONNECTION
FDC05-48S05
Efficiency VS Output Load
10
20
30 40 50 60 70 80
OUTPUT LOAD (% of Full Load)
PIN
SINGLE
DUAL OUTPUT
1
2
3
4
5
6
+ INPUT
- INPUT
+ OUTPUT
NO PIN
- OUTPUT
CTRL (Option)
+ INPUT
- INPUT
+ OUTPUT
COMMON
- OUTPUT
CTRL (Option)
90 100
Page 2 of 2 Issued Date:2008/05/21
Similar pages