General Power Transformer <SMD Type: CM Series> Type: CM-5LN ◆ Product Description ・5.7×5.5mm Max.(L×W), 3.5mm Max. Height. ・Inductance Range: 10μH～1.0mH ・Rated current range: 55mA～545mA. ・5 Terminal pins’ type gives a flexible design as inductors or transformers. ・Custom design is available. ◆ Feature ・Magnetically shielded construction. ・Ideally used in DSC/DVC, PDA, DVD, Game Machine, Power supply module etc as DC-DC Converter inductors or transformers. ・RoHS Compliance ◆ Dimensions (mm) ◆ Land Pattern (mm) 1.6 3.5±0.2 3.5 4.4 3.5±0.5 ＋0.5 5.2－0.2 φ5.0±0.3 0.5±0.1 2.0 5.2±0.3 3.5 MAX. 1.0 ◆ Specification (for transformers) Sample No. 6315-T035 Inductance (6-4) Inductance (3-1) 1kHz/1V 1kHz/1V +40 ％ 10.5µH -20 ％ 190µH (Ref.) D.C.R (6-4) D.C.R (3-1) 663mΩ Max. 7.0Ω Max. Rated Current Rated Current (6-4) (3-1) 350mA 102mA ※ Rated current: The D.C. current at which the inductance decreases to 90% of it’s initial value or When △t=40℃, whichever is lower(Ta=20℃). ※ Schematics (Bottom) S 3 4 “ S” is winding start. 2 1 6 S Please refer to the sales offices on our website for a representative near you www.sumida.com 1/2 General Power Transformer <SMD Type: CM Series> Type: CM-5LN ◆ Specification (for inductors) Inductance ［Within］※1 D.C.R.(Ω) [Max.](at 20℃) Rate Current (mA)※2 CM5LNNP-100□ 10μH 0.24 545 CM5LNNP-120□ 12μH 0.27 470 CM5LNNP-150□ 15μH 0.28 455 CM5LNNP-180□ 18μH 0.32 395 CM5LNNP-220□ 22μH 0.40 370 CM5LNNP-270□ 27μH 0.50 345 CM5LNNP-330□ 33μH 0.55 315 CM5LNNP-390□ 39μH 0.70 280 CM5LNNP-470□ 47μH 0.75 265 CM5LNNP-560□ 56μH 0.85 235 CM5LNNP-680□ 68μH 1.05 200 CM5LNNP-820□ 82μH 1.35 180 CM5LNNP-101□ 100μH 1.90 165 CM5LNNP-121□ 120μH 2.15 150 CM5LNNP-151□ 150μH 3.00 140 CM5LNNP-181□ 180μH 3.35 125 CM5LNNP-221□ 220μH 4.60 120 CM5LNNP-271□ 270μH 5.40 110 CM5LNNP-331□ 330μH 5.95 90 CM5LNNP-391□ 390μH 8.20 85 CM5LNNP-471□ 470μH 9.55 80 CM5LNNP-561□ 560μH 10.65 75 CM5LNNP-681□ 680μH 12.55 70 CM5LNNP-821□ 820μH 12.80 60 CM5LNNP-102□ 1.0 mH 15.05 55 Part Name ※ ※ Description of part name ※ Schematics (Bottom) CM5LNNP-100□ Measuring Frequency 2.52 MHz 1 kHz S 3 4 “ S” is winding start. B Box C Carrier Tape 2 1 6 ※1: Tolerance of inductance +40%,-20%. ※2: Rated current: The D.C. current at which the inductance decreases to 90% of it’s initial value or when △t=40℃, whichever is lower(Ta=20℃). Please refer to the sales offices on our website for a representative near you www.sumida.com 2/2