BeRex BCP080C High efficiency heterojunction power fet chip Datasheet

BCP080C
HIGH EFFICIENCY HETEROJUNCTION POWER FET CHIP (.25µm x 800µm)
The BeRex BCP080C is a GaAs Power pHEMT with a nominal 0.25-micron by 800-micron gate making this product
ideally suited for applications where high-gain and medium power in the DC to 26.5 GHz frequency range are
required. The product may be used in either wideband (6-18 GHz) or narrow-band applications. The BCP080C is
produced using state of the art metallization with SI 3 N 4 passivation and is screened to assure reliability.
PRODUCT FEATURES
•
•
•
28.5 dBm Typical Output Power
11 dB Typical Gain @ 12 GHz
0.25 X 800 Micron Recessed Gate
APPLICATIONS
•
•
•
Commercial
Military / Hi-Rel.
Test & Measurement
ELECTRICAL CHARACTERISTIC (TUNED FOR POWER) T a = 25° C
PARAMETER/TEST CONDITIONS
P 1dB
Output Power @ P 1dB (V ds = 8V, I ds = 120mA)
G 1dB
Gain @ P 1dB (V ds = 8V, I d = 120mA)
PAE
PAE @ P 1dB (V ds = 8V, I d = 120mA)
I dss
Saturated Drain Current (V gs = 0V, V ds = 1.0V)
Gm
Transconductance (V ds = 2V, I d = 120mA)
Vp
Pinch-off Voltage (I ds = 0.8mA, V ds = 2V)
TEST
FREQ.
12 GHZ
18 GHz
12 GHZ
18 GHz
12 GHZ
18 GHz
MIN.
TYPICAL
27.0
25.0
9.5
7.0
28.5
26.5
11.0
8.5
60
45
165
-2.5
245
MAX.
UNIT
dBm
dB
%
325
mA
310
mS
-1.2
V
BV gd
Drain Breakdown Voltage (I gd = 0.8mA, source open)
-15
BV gs
Source Breakdown Voltage (I g = 0.8mA, drain open)
-13
V
R th
Thermal Resistance (Au-Sn Eutectic Attach)
57
°C/W
BeRex, Inc. 3350 Scott Blvd. #6101 Santa Clara 95054 tel. (408) 452-5595
February 2017
www.berex.com
Specifications are subject to change without notice. ©BeRex 2017
Rev. 1.1
-12
V
BCP080C
MAXIMUM RATING (T a = 25° C)
V ds
V gs
Id
I gsf
P in
T ch
T stg
Pt
PARAMETERS
Drain-Source Voltage
Gate-Source Voltage
Drain Current
Forward Gate Current
Input Power
Channel Temperature
Storage Temperature
Total Power Dissipation
ABSOLUTE
12V
-6V
I dss
40 mA
27 dBm
175°C
-60°C ~ 150°C
2.6 W
CONTINUOUS
8V
-3 V
I dss
14 mA
@ 3 dB compression
150°C
-60°C ~ 150°C
2.2 W
Exceeding any of the above Maximum Ratings will result in reduced MTTF and may cause permanent damage to the device.
P IN _P OUT /Gain, PAE (12 GHz)
Frequency = 12 GHz
V ds = 8V, I ds = 120mA (Tuned for Power)
www.berex.com
P IN _P OUT /Gain, PAE (18 GHz)
Frequency = 18 GHz
V ds = 8V, I ds = 120mA (Tuned for Power)
BeRex, Inc. 3350 Scott Blvd. #6101 Santa Clara 95054 tel. (408) 452-5595
Specifications are subject to change without notice. ©BeRex 2017
Rev. 1.1
February 2017
BCP080C
S-PARAMETERS (V ds = 8V, I ds = 120mA)
FREQ.
[GHZ]
S11
[MAG]
S11
[ANG.]
S21
[MAG]
S21
[ANG.]
S12
[MAG]
S12
[ANG.]
S22
[MAG]
S22
[ANG.]
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
11.0
12.0
13.0
14.0
15.0
16.0
17.0
18.0
19.0
20.0
21.0
22.0
23.0
24.0
25.0
26.0
0.91
0.84
0.80
0.80
0.80
0.80
0.82
0.83
0.84
0.86
0.87
0.89
0.90
0.91
0.93
0.93
0.94
0.95
0.94
0.95
0.94
0.93
0.92
0.92
0.92
0.94
-65.34
-109.12
-138.26
-159.40
-175.90
170.62
159.14
149.27
140.52
132.91
126.47
120.57
115.44
110.72
106.04
102.34
99.33
94.95
93.20
91.04
90.33
89.04
87.42
87.13
87.35
84.90
13.90
10.16
7.66
6.03
4.91
4.09
3.50
3.03
2.64
2.32
2.04
1.81
1.62
1.44
1.29
1.15
1.03
0.92
0.81
0.71
0.63
0.56
0.50
0.44
0.38
0.34
139.51
113.35
95.29
81.59
69.83
59.08
49.63
40.49
31.46
23.14
15.19
7.23
-0.24
-7.35
-14.89
-21.63
-28.10
-35.03
-41.10
-46.48
-51.08
-55.67
-60.42
-64.22
-67.40
-69.90
0.025
0.038
0.042
0.043
0.045
0.044
0.045
0.044
0.044
0.043
0.048
0.047
0.050
0.050
0.052
0.054
0.056
0.056
0.058
0.059
0.062
0.067
0.072
0.070
0.067
0.072
59.06
41.30
31.30
25.28
22.42
24.55
22.32
22.24
21.59
20.15
23.22
24.12
21.03
20.46
19.48
17.33
17.10
13.38
12.46
11.04
9.66
10.20
7.56
4.63
7.50
7.17
0.51
0.41
0.35
0.31
0.28
0.26
0.25
0.24
0.24
0.25
0.25
0.27
0.30
0.33
0.37
0.41
0.47
0.51
0.56
0.61
0.65
0.69
0.72
0.74
0.76
0.78
-25.98
-40.91
-49.82
-55.59
-61.55
-69.21
-77.96
-86.56
-97.86
-109.31
-122.87
-135.95
-148.64
-159.77
-170.33
-178.77
173.43
166.46
161.38
155.94
151.50
147.83
142.41
138.53
134.77
130.94
Note: S-parameters include bond wires. Reference planes are at edge of substrates shown on “Wire Bonding Information” figure below.
www.berex.com
BeRex, Inc. 3350 Scott Blvd. #6101 Santa Clara 95054 tel. (408) 452-5595
Specifications are subject to change without notice. ©BeRex 2017
Rev. 1.1
February 2017
BCP080C
WIRE BONDING INFORMATION
Using 1 mil. diameter, Au bonding wires.
1. Gate to input transmission line
- Length and Height : 600 µm x 250 µm
- Number of wire(s): 1
2. Drain to output transmission line
- Length and Height : 400 µm x 250 µm
- Number of wire(s) : 1
3. Source to ground plate
- Length and Height : 250 µm x 300 µm
- Number of wire(s) : 4
DISCLAIMER
BEREX RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN. BEREX DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE
OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN.
LIFE SUPPORT POLICY
BEREX PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES WITHOUT THE
EXPRESS WRITTEN APPROVAL OF BEREX.
1. Life support devices or systems are devices or systems which (a) are intended for surgical implant into the body, or
(b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use
provided in labeling, can be reasonably expected to result in significant injury to the user.
2. A critical component is any component of a life support device or system whose failure to perform can be reasonably
expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.
www.berex.com
BeRex, Inc. 3350 Scott Blvd. #6101 Santa Clara 95054 tel. (408) 452-5595
Specifications are subject to change without notice. ©BeRex 2017
Rev. 1.1
February 2017
Similar pages