OPLINK BTMA040505D1111 Bi-directional integrated tap monitor array Datasheet

Bi-directional Integrated TAP
Monitor Arrays
BTMA Series
Product Description
Oplink’s Bi-directional Integrated Tap Monitor Array (BTMA) is assembled using individual Bidirectional Integrated Tap Monitor (BTMS) to guarantee no optical or electrical cross-talk
among different channels. BTMS is a hybrid component that integrates a flat spectral response
of a thin-film tap with a high sensitivity PIN photodiode for power monitoring applications.The
Bi-directional feature allows power monitoring from input or output ports. BTMA minimizes
component assembly costs and module footprint while increasing module design efficiency by
facilitating fiber management.
Each BTMS in the BTMA integrates the functionality of an optical tap and a photodiode while
delivering low insertion loss and low dark current with high temperature stability over a wide
wavelength range. BTMA is compact and easy to mount on PCB board for module and network system use. Applications include DWDM channel power monitoring, optical network
switching/protection monitoring, re-configurable optical add/drop multiplexers, and gain/attenuation monitoring in amplifier systems.
Oplink can provide customized designs to meet specialized feature applications. Also, Oplink
offers modular assemblies that integrate other components to form a full function module or
subsystem.
Functional Diagram
Output
Input
PD
Performance Specificationns
Features
Parameters
Specification
Operating Wavelength Range
Through
Insertion Loss (@λop, Top, All SOP, Exclude
Connectors)
PD
Fiber Type
2%
≤ 0.4
5%
≤ 0.6
10%
≤ 0.9
Unit
nm
dB
 Low Dark Current
 Various Tap Ratio Available
dB
Return Loss (exclude connector)
≥ 45
dB
Power at Input Port)
 Flat and Broad Operating Wavelength
Range
 Low Insertion Loss and PDL
≤ 0.1
2%
10 ~ 23
14 ~ 26
5%
26 ~ 59
36 ~ 65
10%
52 ~ 110
mA/W
 High Temperature Stability with
Hermetically Sealed Photodiode
 Monitor Optical Signal from Input or
Output
70 ~ 120
Responsivity Polarization Dependence
≤ 0.1
Uniformity
dB
≤ 0.5
dB
Applications
PD Dark Current (@ 70°C, -5V bias)
≤ 10
nA
Bandwidth (50 ohm, 5V, -3dB)
≥ 0.5
GHz
 Add/Drop and Optical Protection
Monitoring
Reverse Voltage
≤ 20
V
Forward Current
≤5
mA
1
Input Optical Power
Conditions
1510~1610
Polarization Dependent Loss
Responsivity (Relative to Nominal
Tapped
Monitoring
1260 ~ 1360
2%
≤ 21
5%
≤ 16
10%
≤12
dBm
Operating Temperature Range (<85%RH, Non-condensing)
-0
+70
°C
Storage Temperature Range (<85%RH, Non-condensing)
-40
+85
°C
SMF-28
 DWDM/CWDM Systems
Notes:
Directivity is defined as -10 log(ℜOut→PD / ℜIn→PD)
where ℜ stands for responsivity.
1)
S0135 - R02. (web) 20130520
Bi-directional Integrated TAP Monitor Array
BTMA Series
Mechanical Drawing / Package Dimensions (dimension in mm)
46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: [email protected] • www.oplink.com
1) 4-ch BTMA
Electrical Pin Assignment
Pin#: Common Cathode Assignment
Pin1: Common Cathode for Ch1 & 2
Pin2: Anode Ch1
Pin3: Anode Ch2
Pin4: Common Cathode for Ch3 & 4
Pin5: Anode Ch3
Pin6: Anode Ch4
2) 8-ch BTMA
Common Anode Assignment
Common Anode for Ch1 & 2
Cathode Ch1
Cathode Ch2
Common Anode for Ch3 & 4
Cathode Ch3
Cathode Ch4
3) 10-ch BTMA
Electrical Pin Assignment
Pin#: Common Cathode Assignment
Pin1: Common Cathode for Ch1 & 2
Pin2: Anode Ch1
Pin3: Anode Ch2
Pin4: Common Cathode for Ch3 & 4
Pin5: Anode Ch3
Pin6: Anode Ch4
Pin7: Anode Ch5
Pin8: Common Cathode for Ch5 & 6
Pin9: Anode Ch6
Pin10: Anode Ch7
Pin11: Common Cathode for Ch7 & 8
Pin12: Anode Ch8
Common Anode Assignment
Common Anode for Ch1 & 2
Cathode Ch1
Cathode Ch2
Common Anode for Ch3 & 4
Cathode Ch3
Cathode Ch4
Cathode Ch5
Common Anode for Ch5 & 6
Cathode Ch6
Cathode Ch7
Common Anode for Ch7 & 8
Cathode Ch8
Note: Input and output ports are marked for testing purpose.
Electrical Pin Assignment
Pin#: Common Cathode Assignment
Pin1: Common Cathode for Ch1 to 4
Pin2: Anode Ch1
Pin3: Anode Ch2
Pin4: Anode Ch3
Pin5: Anode Ch4
Pin6: Anode Ch5
Pin7: Common Cathode for Ch5 to 8
Pin8: Anode Ch6
Pin9: Anode Ch7
Pin10: Anode Ch8
Pin11: Anode Ch9
Pin12: Common Cathode for Ch9 & 10
Pin13: Anode Ch10
Pin 14: Not connected
Common Anode Assignment
Common Anode for Ch1 to 4
Cathode Ch1
Cathode Ch2
Cathode Ch3
Cathode Ch4
Cathode Ch5
Common Anode for Ch5 to 8
Cathode Ch6
Cathode Ch7
Cathode Ch8
Cathode Ch9
Common Anode for Ch9 & 10
Cathode Ch10
Not connected
Ordering Information
Oplink can provide a remarkable range of customized optical solutions. For detail, please contact Oplink’s OEM
design team or account manager for your requirements and ordering information (510) 933-7200.
0
BTMA
No. of Channal
4 channels= 04
8 channels= 08
10 channels= 10
5
Tap Ratio
Bandwidth
2/98= 02
5/95= 05
10/90= 10
0.5G= 05
Package Type
Fiber Length
Common Anode= 1
Common Cathode= 2
0.5meter= H
1.0meter= 1
1.5meter= 5
2.0meter= 2
Wavelength
1310/1550= D
1310nm= 3
C+L band= E
Connector
Type
Fiber Type
SMF-28 250µm =1
SMF-28 w/ 900µm loose tube =2
SMF-28 ribbonized=3
None = 1
FC/PC=2
FC/SPC=3
FC/APC=4
SC/PC=5
SC/SPC=6
SC/APC=7
ST=8
LC=9
MU=A
RoHS:
1. BTMA is RoHS 5 compliant (RoHS permitted Lead in solder exemption is applied).
2. Add “G” to the end of the above PN for RoHS 6 Requirement.
S0135 - R02. (web) 20130520
Product Lines:  Mux/Demux  Switching/Routing  Coupling/Splitting  Monitoring/Conditioning  Amplification  Interconnect  Transmission  HFC/RoF Subsystem
Similar pages