Philips Semiconductors Product specification TrenchMOS transistor Standard level FET GENERAL DESCRIPTION N-channel enhancement mode standard level field-effect power transistor in a plastic envelope using ’trench’ technology which features very low on-state resistance. It is intended for use in automotive and general purpose switching applications. PINNING - TO220AB PIN BUK7515-100A QUICK REFERENCE DATA SYMBOL PARAMETER VDS ID Ptot Tj RDS(ON) Drain-source voltage Drain current (DC) Total power dissipation Junction temperature Drain-source on-state resistance VGS = 10 V PIN CONFIGURATION MAX. UNIT 100 75 230 175 15 V A W ˚C mΩ SYMBOL DESCRIPTION d tab 1 gate 2 drain 3 source g tab drain s 1 23 LIMITING VALUES Limiting values in accordance with the Absolute Maximum System (IEC 134) SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT VDS VDGR ±VGS ID ID IDM Ptot Tstg, Tj Drain-source voltage Drain-gate voltage Gate-source voltage Drain current (DC) Drain current (DC) Drain current (pulse peak value) Total power dissipation Storage & operating temperature RGS = 20 kΩ Tmb = 25 ˚C Tmb = 100 ˚C Tmb = 25 ˚C Tmb = 25 ˚C - - 55 100 100 20 75 53 240 230 175 V V V A A A W ˚C TYP. MAX. UNIT - 0.65 K/W 60 - K/W THERMAL RESISTANCES SYMBOL PARAMETER CONDITIONS Rth j-mb Thermal resistance junction to mounting base Thermal resistance junction to ambient - Rth j-a December 1998 in free air 1 Rev 1.100 Philips Semiconductors Product specification TrenchMOS transistor Standard level FET BUK7515-100A STATIC CHARACTERISTICS Tj= 25˚C unless otherwise specified SYMBOL PARAMETER CONDITIONS V(BR)DSS Drain-source breakdown voltage Gate threshold voltage VGS = 0 V; ID = 0.25 mA; VGS(TO) Tj = -55˚C VDS = VGS; ID = 1 mA Tj = 175˚C Tj = -55˚C IDSS Zero gate voltage drain current VDS = 100 V; VGS = 0 V; IGSS RDS(ON) Gate source leakage current Drain-source on-state resistance VGS = ±20 V; VDS = 0 V VGS = 10 V; ID = 25 A Tj = 175˚C Tj = 175˚C MIN. TYP. MAX. UNIT 100 89 2 1 - 3.0 0.05 2 12.0 - 4.0 4.4 10 500 100 15.0 40.5 V V V V V µA µA nA mΩ mΩ MIN. TYP. MAX. UNIT DYNAMIC CHARACTERISTICS Tmb = 25˚C unless otherwise specified SYMBOL PARAMETER CONDITIONS Ciss Coss Crss Input capacitance Output capacitance Feedback capacitance VGS = 0 V; VDS = 25 V; f = 1 MHz - 4500 550 305 6000 660 400 pF pF pF td on tr td off tf Turn-on delay time Turn-on rise time Turn-off delay time Turn-off fall time VDD = 30 V; Rload =1.2Ω; VGS = 10 V; RG = 10 Ω - 35 85 150 70 55 125 225 100 ns ns ns ns Ld Internal drain inductance - 3.5 - nH Ld Internal drain inductance - 4.5 - nH Ls Internal source inductance Measured from contact screw on tab to centre of die Measured from drain lead 6 mm from package to centre of die Measured from source lead 6 mm from package to source bond pad - 7.5 - nH MIN. TYP. MAX. UNIT - - 75 A IF = 25 A; VGS = 0 V IF = 75 A; VGS = 0 V - 0.85 1.1 240 1.2 - A V V IF = 75 A; -dIF/dt = 100 A/µs; VGS = -10 V; VR = 30 V - 80 0.35 - ns µC MIN. TYP. MAX. UNIT - - 120 mJ REVERSE DIODE LIMITING VALUES AND CHARACTERISTICS Tj = 25˚C unless otherwise specified SYMBOL PARAMETER IDR IDRM VSD Continuous reverse drain current Pulsed reverse drain current Diode forward voltage trr Qrr Reverse recovery time Reverse recovery charge CONDITIONS AVALANCHE LIMITING VALUE SYMBOL PARAMETER CONDITIONS WDSS Drain-source non-repetitive unclamped inductive turn-off energy ID = 35 A; VDD ≤ 25 V; VGS = 10 V; RGS = 50 Ω; Tmb = 25 ˚C December 1998 2 Rev 1.100 Philips Semiconductors Product specification TrenchMOS transistor Standard level FET 120 BUK7515-100A Normalised Power Derating PD% Zth / (K/W) 1 D= 110 100 0.5 90 0.2 80 0.1 70 0.1 60 0.05 50 0.02 40 PD tp D= 0.01 30 20 t T 0 10 tp T 0 0 20 40 60 80 100 Tmb / C 120 140 160 180 0.001 Fig.1. Normalised power dissipation. PD% = 100⋅PD/PD 25 ˚C = f(Tmb) 120 0.001 t/S 0.1 10 Fig.4. Transient thermal impedance. Zth j-mb = f(t); parameter D = tp/T Normalised Current Derating ID% 0.00001 300 110 20.0 VGS\V = ID/A 10.0 250 100 8.0 7.5 90 200 80 9.0 7.0 70 60 150 6.5 100 6.0 50 40 30 20 5.5 50 10 5.0 4.5 0 0 20 40 60 80 100 Tmb / C 120 140 160 180 0 Fig.2. Normalised continuous drain current. ID% = 100⋅ID/ID 25 ˚C = f(Tmb); conditions: VGS ≥ 5 V 20 RDS(ON) = VDS/ID 4 6 VDS/V 8 10 RDS(ON)/mOhm 19 tp = 100 2 Fig.5. Typical output characteristics, Tj = 25 ˚C. ID = f(VDS); parameter VGS 1000 ID/A 0 1uS 18 100uS 17 VGS/V = 16 1mS 15 DC 10 10mS 5.5 14 6.0 6.5 7.0 8.0 10.0 100mS 13 12 1 1 10 VDS/V 11 100 Fig.3. Safe operating area. Tmb = 25 ˚C ID & IDM = f(VDS); IDM single pulse; parameter tp December 1998 0 20 40 ID/A 60 80 100 Fig.6. Typical on-state resistance, Tj = 25 ˚C. RDS(ON) = f(ID); parameter VGS 3 Rev 1.100 Philips Semiconductors Product specification TrenchMOS transistor Standard level FET BUK7515-100A RDS(ON)/mOhm 16 15 Rds(on) normalised to 25degC a 3 2.5 14 2 13 1.5 12 1 11 10 0.5 5 10 15 VGS/V 20 Fig.7. Typical on-state resistance, Tj = 25 ˚C. RDS(ON) = f(VGS); conditions ID = 25 A; -100 -50 0 50 100 Tmb / degC 150 200 Fig.10. Normalised drain-source on-state resistance. a = RDS(ON)/RDS(ON)25 ˚C = f(Tj); ID = 25 A; VGS = 5 V 100 5 VGS(TO) / V BUK759-60 ID/A max. 80 4 typ. 60 3 40 2 min. 25 175 Tj/C = 1 20 0 0 1 2 3 VGS/V 4 5 6 0 -100 7 Fig.8. Typical transfer characteristics. ID = f(VGS) ; conditions: VDS = 25 V; parameter Tj -50 0 50 Tj / C 100 150 200 Fig.11. Gate threshold voltage. VGS(TO) = f(Tj); conditions: ID = 1 mA; VDS = VGS 90 gfs/S 80 1E-01 70 1E-02 Sub-Threshold Conduction 60 2% 1E-03 50 typ 98% 40 1E-04 30 20 1E-05 10 0 0 20 40 ID/A 60 80 1E-06 100 Fig.9. Typical transconductance, Tj = 25 ˚C. gfs = f(ID); conditions: VDS = 25 V December 1998 0 1 2 3 4 5 Fig.12. Sub-threshold drain current. ID = f(VGS); conditions: Tj = 25 ˚C; VDS = VGS 4 Rev 1.100 Philips Semiconductors Product specification TrenchMOS transistor Standard level FET BUK7515-100A Thousands pF 11 120 10 110 9 100 8 90 WDSS% 80 7 70 6 60 5 50 Ciss 4 40 3 30 20 2 10 1 0 0.01 0.1 1 10 VDS/V 0 Coss Crss 100 20 Fig.13. Typical capacitances, Ciss, Coss, Crss. C = f(VDS); conditions: VGS = 0 V; f = 1 MHz 40 60 80 100 120 Tmb / C 140 160 180 Fig.16. Normalised avalanche energy rating. WDSS% = f(Tmb); conditions: ID = 75 A 12 VGS/V VDD + 10 L 8 VDS = 80V 14V VDS 6 - VGS -ID/100 4 0 2 0 T.U.T. R 01 shunt RGS 0 20 40 60 80 100 120 QG/nC Fig.17. Avalanche energy test circuit. WDSS = 0.5 ⋅ LID2 ⋅ BVDSS /(BVDSS − VDD ) Fig.14. Typical turn-on gate-charge characteristics. VGS = f(QG); conditions: ID = 25 A; parameter VDS 100 ID/A + 80 VDD RD 60 VDS Tj/C = 25 175 - VGS 40 0 RG T.U.T. 20 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 VSDS/V 0.8 0.9 1 1.1 Fig.15. Typical reverse diode current. IF = f(VSDS); conditions: VGS = 0 V; parameter Tj December 1998 Fig.18. Switching test circuit. 5 Rev 1.100 Philips Semiconductors Product specification TrenchMOS transistor Standard level FET BUK7515-100A MECHANICAL DATA Dimensions in mm 4,5 max Net Mass: 2 g 10,3 max 1,3 3,7 2,8 5,9 min 15,8 max 3,0 max not tinned 3,0 13,5 min 1,3 max 1 2 3 (2x) 0,9 max (3x) 2,54 2,54 0,6 2,4 Fig.19. SOT78 (TO220AB); pin 2 connected to mounting base. Notes 1. Observe the general handling precautions for electrostatic-discharge sensitive devices (ESDs) to prevent damage to MOS gate oxide. 2. Refer to mounting instructions for SOT78 (TO220) envelopes. 3. Epoxy meets UL94 V0 at 1/8". December 1998 6 Rev 1.100 Philips Semiconductors Product specification TrenchMOS transistor Standard level FET BUK7515-100A DEFINITIONS Data sheet status Objective specification This data sheet contains target or goal specifications for product development. Preliminary specification This data sheet contains preliminary data; supplementary data may be published later. Product specification This data sheet contains final product specifications. Limiting values Limiting values are given in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of this specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Where application information is given, it is advisory and does not form part of the specification. Philips Electronics N.V. 1999 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, it is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights. LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale. December 1998 7 Rev 1.100