Panasonic EETHC1V153LJ Snap-in type Datasheet

Aluminum Electrolytic Capacitors/ HC
Snap-in Type
Series:
HC
Type:
TS
■ Features
● Endurance : 105 °C 2000 h
● 30 % smaller than series TS-HB
● RoHS directive compliant
■ Specifications
Category Temp. Range
Rated W.V. Range
Nominal Cap. Range
Capacitance Tolerance
–40 °C to +105 °C
10 V.DC to 100 V.DC
160 V.DC to 250 V.DC
820 µF to 100000 µF
150 µF to 3300 µF
±20 % (120 Hz/+20 °C)
–25 °C to +105 °C
315 V.DC to 450 V.DC
39 µF to 1000 µF
3앀 CV (µA) max. After 5 minutes application of rated working voltage at +20 °C.
C : Capacitance (µF) V: W.V. (V.DC)
DC Leakage Current
tan δ
Please see the attached standard
Frequency (Hz)
50
Frequency Correction
10 V.DC to 100 V.DC /C.F.
0.93
Factor for Ripple Current
160 V.DC to 450 V.DC /C.F.
0.75
products
60
0.95
0.80
list
100
0.99
0.95
120
1.00
1.00
500
1.05
1.20
1 k
1.08
1.25
10 k to
1.15
1.40
After 2000 hours application of DC voltage with specified ripple current (< rated DC working voltage)
at +105 °C±2 °C, the capacitors shall meet the following limits.
Capacitance change < ±20 % of initial measured value
tan δ
< 200 % of initial specified value
DC leakage current
< initial specified value
Endurance
After storage for 1000 hours at +105 °C±2 °C within no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment)
Shelf Life
■ Dimensions in mm (not to scale)
φD+1.0 max.
Polarity bar
(mm)
(1
0 .0
Sleeve
2-φ2.0±0.1
10
.0±
0.1
)
Vent
L+2.0 max.
(φD)
4.0±0.5
Rated voltage etc. indicate to sleeve.
Recommended PWB piercing plan
4.0±0.5
+0.2
2.0 max.
Terminal
(t=0.8)
(3.5)
0.8 –0.1
1.5±0.2
Top of spin
Standard terminal type does not require
terminal trimming peocess.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Jul. 2008
Aluminum Electrolytic Capacitors/ HC
■ Standard Products
Case size
W.V.
Cap.
(120 Hz)
(±20 %)
(V. DC)
(µF)
12000
15000
18000
22000
27000
33000
10
39000
47000
56000
68000
✽
✽
82000
100000
10000
12000
15000
18000
22000
16
27000
33000
39000
47000
56000
✽
68000
Dia.
Length
(mm)
22
22
22
25
22
25
22
25
30
22
25
25
30
35
25
30
35
30
35
30
35
35
35
22
22
25
22
22
25
22
25
30
22
25
30
35
25
30
30
35
30
35
30
35
35
(mm)
25
30
30
25
35
30
40
35
25
45
40
45
30
25
50
35
30
40
35
45
40
45
50
25
30
25
35
40
30
45
35
25
50
40
30
25
45
35
40
30
45
35
50
40
45
Part No.
PET sleeve
Terminal Length
4.0 mm
(Without Top Plate)
EETHC1A123HJ
EETHC1A153HJ
EETHC1A183HJ
EETHC1A183JJ
EETHC1A223HJ
EETHC1A223JJ
EETHC1A273HJ
EETHC1A273JJ
EETHC1A273KJ
EETHC1A333HJ
EETHC1A333JJ
EETHC1A393JJ
EETHC1A393KJ
EETHC1A393LJ
EETHC1A473JJ
EETHC1A473KJ
EETHC1A473LJ
EETHC1A563KJ
EETHC1A563LJ
EETHC1A683KJ
EETHC1A683LJ
EETHC1A823LJ
EETHC1A104LJ
EETHC1C103HJ
EETHC1C123HJ
EETHC1C123JJ
EETHC1C153HJ
EETHC1C183HJ
EETHC1C183JJ
EETHC1C223HJ
EETHC1C223JJ
EETHC1C223KJ
EETHC1C273HJ
EETHC1C273JJ
EETHC1C273KJ
EETHC1C273LJ
EETHC1C333JJ
EETHC1C333KJ
EETHC1C393KJ
EETHC1C393LJ
EETHC1C473KJ
EETHC1C473LJ
EETHC1C563KJ
EETHC1C563LJ
EETHC1C683LJ
Specification
Ripple
tan δ
Current
(120 Hz)
(120 Hz)
(+20 °C)
(+105 °C)
max.
(A r.m.s.)
2.20
0.65
2.30
0.65
2.40
0.65
2.40
0.65
2.60
0.65
2.60
0.65
3.10
0.65
3.10
0.65
3.10
0.65
3.40
0.65
3.40
0.65
3.70
0.71
3.70
0.71
3.70
0.71
4.20
0.79
4.20
0.79
4.20
0.79
5.00
0.88
5.00
0.88
5.40
1.00
5.40
1.00
5.90
1.14
6.50
1.32
2.60
0.55
2.90
0.55
2.90
0.55
3.20
0.55
3.50
0.55
3.50
0.55
3.80
0.55
3.80
0.55
3.80
0.55
4.20
0.55
4.20
0.55
4.20
0.55
4.20
0.55
4.70
0.55
4.70
0.55
5.10
0.61
5.10
0.61
5.50
0.69
5.50
0.69
6.00
0.78
6.00
0.78
6.40
0.90
Min. Packaging Q'ty
(pcs)
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
100
200
100
100
100
100
100
100
200
200
200
200
200
200
200
200
200
200
200
200
200
200
100
100
200
100
100
100
100
100
Endurance : 105 °C 2000 h, Terminal Pitch : 10 mm
✽When capacitors of φ35҂45L and φ35҂50L are mounted on PWB, reinforce them with mounting clamp or adhesives.
(Avoid using adhesives including halogenated compositions.)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Jul. 2008
Aluminum Electrolytic Capacitors/ HC
■ Standard Products
Case size
W.V.
Cap.
(120 Hz)
(±20 %)
(V. DC)
(µF)
6800
8200
10000
12000
15000
18000
25
22000
27000
33000
✽
✽
39000
47000
4700
5600
6800
8200
10000
12000
35
15000
18000
22000
✽
✽
27000
33000
Dia.
Length
(mm)
22
22
25
22
22
25
22
25
30
22
25
30
35
25
30
35
30
35
30
35
30
35
35
22
22
25
22
22
25
22
25
30
22
25
30
35
25
30
35
30
35
30
35
30
35
35
(mm)
25
30
25
35
40
30
45
35
25
50
40
30
25
45
35
30
40
35
45
40
50
45
50
25
30
25
35
40
30
45
35
25
50
40
30
25
45
35
30
40
35
45
40
50
45
50
Part No.
PET sleeve
Terminal Length
4.0 mm
(Without Top Plate)
EETHC1E682HJ
EETHC1E822HJ
EETHC1E822JJ
EETHC1E103HJ
EETHC1E123HJ
EETHC1E123JJ
EETHC1E153HJ
EETHC1E153JJ
EETHC1E153KJ
EETHC1E183HJ
EETHC1E183JJ
EETHC1E183KJ
EETHC1E183LJ
EETHC1E223JJ
EETHC1E223KJ
EETHC1E223LJ
EETHC1E273KJ
EETHC1E273LJ
EETHC1E333KJ
EETHC1E333LJ
EETHC1E393KJ
EETHC1E393LJ
EETHC1E473LJ
EETHC1V472HJ
EETHC1V562HJ
EETHC1V562JJ
EETHC1V682HJ
EETHC1V822HJ
EETHC1V822JJ
EETHC1V103HJ
EETHC1V103JJ
EETHC1V103KJ
EETHC1V123HJ
EETHC1V123JJ
EETHC1V123KJ
EETHC1V123LJ
EETHC1V153JJ
EETHC1V153KJ
EETHC1V153LJ
EETHC1V183KJ
EETHC1V183LJ
EETHC1V223KJ
EETHC1V223LJ
EETHC1V273KJ
EETHC1V273LJ
EETHC1V333LJ
Specification
Ripple
tan δ
Current
(120 Hz)
(120 Hz)
(+20 °C)
(+105 °C)
max.
(A r.m.s.)
2.40
0.40
2.70
0.40
2.70
0.40
3.00
0.40
3.20
0.40
3.20
0.40
3.60
0.40
3.60
0.40
3.60
0.40
3.90
0.40
3.90
0.40
3.90
0.40
3.90
0.40
4.30
0.40
4.30
0.40
4.30
0.40
4.80
0.40
4.80
0.40
5.50
0.40
5.50
0.40
5.80
0.46
5.80
0.46
6.30
0.54
2.20
0.35
2.40
0.35
2.40
0.35
2.60
0.35
2.90
0.35
2.90
0.35
3.20
0.35
3.20
0.35
3.20
0.35
3.50
0.35
3.50
0.35
3.50
0.35
3.50
0.35
3.90
0.35
3.90
0.35
3.90
0.35
4.30
0.35
4.30
0.35
5.00
0.35
5.00
0.35
5.30
0.35
5.30
0.35
5.90
0.35
Min. Packaging Q'ty
(pcs)
200
200
200
200
200
200
200
200
200
200
200
200
200
200
100
200
100
100
100
100
100
100
100
200
200
200
200
200
200
200
200
200
200
200
200
200
200
100
200
100
100
100
100
100
100
100
Endurance : 105 °C 2000 h, Terminal Pitch : 10 mm
✽When capacitors of φ35҂45L and φ35҂50L are mounted on PWB, reinforce them with mounting clamp or adhesives.
(Avoid using adhesives including halogenated compositions.)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Jul. 2008
Aluminum Electrolytic Capacitors/ HC
■ Standard Products
Case size
W.V.
Cap.
(120 Hz)
(±20 %)
(V. DC)
(µF)
2700
3300
3900
4700
5600
6800
50
8200
10000
12000
15000
✽
18000
2200
2700
3300
3900
4700
5600
63
6800
8200
10000
✽
✽
12000
15000
Dia.
Length
(mm)
22
22
22
25
22
25
22
25
30
22
25
30
35
25
30
25
30
35
30
35
30
35
35
22
22
25
22
22
25
30
22
25
22
25
30
35
25
30
35
30
35
30
35
30
35
35
(mm)
25
30
35
25
40
30
45
35
25
50
40
30
25
45
35
50
40
30
45
35
50
40
45
25
30
25
35
40
30
25
45
35
50
40
30
25
45
35
30
40
35
45
40
50
45
50
Part No.
PET sleeve
Terminal Length
4.0 mm
(Without Top Plate)
EETHC1H272HJ
EETHC1H332HJ
EETHC1H392HJ
EETHC1H392JJ
EETHC1H472HJ
EETHC1H472JJ
EETHC1H562HJ
EETHC1H562JJ
EETHC1H562KJ
EETHC1H682HJ
EETHC1H682JJ
EETHC1H682KJ
EETHC1H682LJ
EETHC1H822JJ
EETHC1H822KJ
EETHC1H103JJ
EETHC1H103KJ
EETHC1H103LJ
EETHC1H123KJ
EETHC1H123LJ
EETHC1H153KJ
EETHC1H153LJ
EETHC1H183LJ
EETHC1J222HJ
EETHC1J272HJ
EETHC1J272JJ
EETHC1J332HJ
EETHC1J392HJ
EETHC1J392JJ
EETHC1J392KJ
EETHC1J472HJ
EETHC1J472JJ
EETHC1J562HJ
EETHC1J562JJ
EETHC1J562KJ
EETHC1J562LJ
EETHC1J682JJ
EETHC1J682KJ
EETHC1J682LJ
EETHC1J822KJ
EETHC1J822LJ
EETHC1J103KJ
EETHC1J103LJ
EETHC1J123KJ
EETHC1J123LJ
EETHC1J153LJ
Specification
Ripple
tan δ
Current
(120 Hz)
(120 Hz)
(+20 °C)
(+105 °C)
max.
(A r.m.s.)
1.80
0.35
2.00
0.35
2.20
0.35
2.20
0.35
2.50
0.35
2.50
0.35
2.80
0.35
2.80
0.35
2.80
0.35
3.30
0.35
3.30
0.35
3.30
0.35
3.30
0.35
3.60
0.35
3.60
0.35
4.00
0.35
4.00
0.35
4.00
0.35
4.50
0.35
4.50
0.35
4.80
0.35
4.80
0.35
5.20
0.35
2.00
0.30
2.20
0.30
2.20
0.30
2.50
0.30
2.70
0.30
2.70
0.30
2.70
0.30
3.00
0.30
3.00
0.30
3.30
0.30
3.30
0.30
3.30
0.30
3.30
0.30
3.60
0.30
3.60
0.30
3.60
0.30
3.90
0.30
3.90
0.30
4.40
0.30
4.40
0.30
4.80
0.30
4.80
0.30
5.40
0.30
Min. Packaging Q'ty
(pcs)
200
200
200
200
200
200
200
200
200
200
200
200
200
200
100
200
100
200
100
100
100
100
100
200
200
200
200
200
200
200
200
200
200
200
200
200
200
100
200
100
100
100
100
100
100
100
Endurance : 105 °C 2000 h, Terminal Pitch : 10 mm
✽When capacitors of φ35҂45L and φ35҂50L are mounted on PWB, reinforce them with mounting clamp or adhesives.
(Avoid using adhesives including halogenated compositions.)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Jul. 2008
Aluminum Electrolytic Capacitors/ HC
■ Standard Products
Case size
W.V.
Cap.
(120 Hz)
(±20 %)
(V. DC)
(µF)
1200
1500
1800
2200
2700
3300
80
3900
4700
5600
6800
✽
8200
820
1000
1200
1500
1800
2200
100
2700
3300
3900
4700
✽
✽
5600
6800
Dia.
Length
(mm)
22
22
25
22
22
25
22
25
30
22
25
30
35
25
30
25
30
35
30
35
30
35
35
22
22
22
25
22
25
22
25
30
22
25
30
35
25
30
25
30
35
30
35
30
35
35
35
(mm)
25
30
25
35
40
30
45
35
25
50
40
30
25
45
35
50
40
30
45
35
50
40
45
25
30
30
25
35
30
40
35
25
45
40
30
25
45
35
50
40
30
45
35
50
40
45
50
Part No.
PET sleeve
Terminal Length
4.0 mm
(Without Top Plate)
EETHC1K122HJ
EETHC1K152HJ
EETHC1K152JJ
EETHC1K182HJ
EETHC1K222HJ
EETHC1K222JJ
EETHC1K272HJ
EETHC1K272JJ
EETHC1K272KJ
EETHC1K332HJ
EETHC1K332JJ
EETHC1K332KJ
EETHC1K332LJ
EETHC1K392JJ
EETHC1K392KJ
EETHC1K472JJ
EETHC1K472KJ
EETHC1K472LJ
EETHC1K562KJ
EETHC1K562LJ
EETHC1K682KJ
EETHC1K682LJ
EETHC1K822LJ
EETHC2A821HJ
EETHC2A102HJ
EETHC2A122HJ
EETHC2A122JJ
EETHC2A152HJ
EETHC2A152JJ
EETHC2A182HJ
EETHC2A182JJ
EETHC2A182KJ
EETHC2A222HJ
EETHC2A222JJ
EETHC2A222KJ
EETHC2A222LJ
EETHC2A272JJ
EETHC2A272KJ
EETHC2A332JJ
EETHC2A332KJ
EETHC2A332LJ
EETHC2A392KJ
EETHC2A392LJ
EETHC2A472KJ
EETHC2A472LJ
EETHC2A562LJ
EETHC2A682LJ
Specification
Ripple
tan δ
Current
(120 Hz)
(120 Hz)
(+20 °C)
(+105 °C)
max.
(A r.m.s.)
1.50
0.25
1.70
0.25
1.70
0.25
1.80
0.25
2.10
0.25
2.10
0.25
2.40
0.25
2.40
0.25
2.40
0.25
2.60
0.25
2.60
0.25
2.60
0.25
2.60
0.25
3.00
0.25
3.00
0.25
3.30
0.25
3.30
0.25
3.30
0.25
3.70
0.25
3.70
0.25
3.90
0.25
3.90
0.25
4.30
0.25
1.40
0.25
1.70
0.25
1.80
0.25
1.80
0.25
2.10
0.25
2.10
0.25
2.30
0.25
2.30
0.25
2.30
0.25
2.60
0.25
2.60
0.25
2.60
0.25
2.60
0.25
2.90
0.25
2.90
0.25
3.20
0.25
3.20
0.25
3.20
0.25
3.60
0.25
3.60
0.25
3.80
0.25
3.80
0.25
4.10
0.25
4.50
0.25
Min. Packaging Q'ty
(pcs)
200
200
200
200
200
200
200
200
200
200
200
200
200
200
100
200
100
200
100
100
100
100
100
200
200
200
200
200
200
200
200
200
200
200
200
200
200
100
200
100
200
100
100
100
100
100
100
Endurance : 105 °C 2000 h, Terminal Pitch : 10 mm
✽When capacitors of φ35҂45L and φ35҂50L are mounted on PWB, reinforce them with mounting clamp or adhesives.
(Avoid using adhesives including halogenated compositions.)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Jul. 2008
Aluminum Electrolytic Capacitors/ HC
■ Standard Products
Case size
W.V.
Cap.
(120 Hz)
(±20 %)
(V. DC)
(µF)
470
560
680
820
1000
1200
160
1500
1800
2200
2700
✽
3300
470
560
680
820
1000
180
1200
1500
1800
2200
✽
2700
Dia.
Length
(mm)
22
22
22
25
22
25
22
25
30
22
25
30
35
25
30
35
25
30
35
30
35
30
35
35
22
22
25
22
25
22
25
30
22
25
30
35
25
30
30
25
30
35
30
35
30
35
35
(mm)
25
30
30
25
35
30
40
35
25
45
40
30
25
45
35
30
50
40
30
45
35
50
40
50
25
30
25
35
30
40
30
25
45
40
30
25
45
30
35
50
40
30
45
35
50
40
50
Part No.
PET sleeve
Terminal Length
4.0 mm
(Without Top Plate)
EETHC2C471HJ
EETHC2C561HJ
EETHC2C681HJ
EETHC2C681JJ
EETHC2C821HJ
EETHC2C821JJ
EETHC2C102HJ
EETHC2C102JJ
EETHC2C102KJ
EETHC2C122HJ
EETHC2C122JJ
EETHC2C122KJ
EETHC2C122LJ
EETHC2C152JJ
EETHC2C152KJ
EETHC2C152LJ
EETHC2C182JJ
EETHC2C182KJ
EETHC2C182LJ
EETHC2C222KJ
EETHC2C222LJ
EETHC2C272KJ
EETHC2C272LJ
EETHC2C332LJ
EETHC2P471HC
EETHC2P561HJ
EETHC2P561JJ
EETHC2P681HJ
EETHC2P681JJ
EETHC2P821HJ
EETHC2P821JJ
EETHC2P821KJ
EETHC2P102HJ
EETHC2P102JJ
EETHC2P102KJ
EETHC2P102LJ
EETHC2P122JJ
EETHC2P122KC
EETHC2P122KJ
EETHC2P152JJ
EETHC2P152KJ
EETHC2P152LJ
EETHC2P182KJ
EETHC2P182LJ
EETHC2P222KJ
EETHC2P222LJ
EETHC2P272LJ
Specification
Ripple
tan δ
Current
(120 Hz)
(120 Hz)
(+20 °C)
(+105 °C)
max.
(A r.m.s.)
1.40
0.15
1.50
0.15
1.70
0.15
1.70
0.15
2.00
0.15
2.00
0.15
2.20
0.15
2.20
0.15
2.20
0.15
2.30
0.15
2.30
0.15
2.30
0.15
2.30
0.15
2.50
0.15
2.50
0.15
2.50
0.15
2.70
0.15
2.70
0.15
2.70
0.15
2.90
0.15
2.90
0.15
3.10
0.15
3.10
0.15
3.30
0.15
1.45
0.15
1.50
0.15
1.50
0.15
1.70
0.15
1.70
0.15
2.00
0.15
2.00
0.15
2.00
0.15
2.20
0.15
2.20
0.15
2.20
0.15
2.20
0.15
2.30
0.15
2.30
0.15
2.30
0.15
2.50
0.15
2.50
0.15
2.50
0.15
2.70
0.15
2.70
0.15
2.90
0.15
2.90
0.15
3.10
0.15
Min. Packaging Q'ty
(pcs)
200
200
200
200
200
200
200
200
200
200
200
200
200
200
100
200
200
100
200
100
100
100
100
100
200
200
200
200
200
200
200
200
200
200
200
200
200
200
100
200
100
200
100
100
100
100
100
Endurance : 105 °C 2000 h, Terminal Pitch : 10 mm
✽When capacitors of φ35҂45L and φ35҂50L are mounted on PWB, reinforce them with mounting clamp or adhesives.
(Avoid using adhesives including halogenated compositions.)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Jul. 2008
Aluminum Electrolytic Capacitors/ HC
■ Standard Products
Case size
W.V.
Cap.
(120 Hz)
(±20 %)
(V. DC)
(µF)
390
470
560
680
820
1000
200
1200
1500
1800
✽
2200
270
330
390
470
560
680
220
820
1000
1200
1500
✽
✽
1800
2200
Dia.
Length
(mm)
22
22
25
22
22
25
22
25
30
22
25
25
30
35
25
25
30
35
30
35
30
35
30
35
22
22
22
22
25
25
22
22
25
22
25
30
35
22
25
30
35
25
25
30
35
25
30
35
30
30
35
30
35
35
(mm)
25
30
25
30
40
30
45
35
25
50
40
45
30
25
45
50
35
30
40
30
45
40
50
45
25
25
30
35
25
30
35
40
30
45
35
25
25
50
40
30
25
45
50
35
30
50
40
35
45
50
40
50
45
50
Part No.
PET sleeve
Terminal Length
4.0 mm
(Without Top Plate)
EETHC2D391HJ
EETHC2D471HJ
EETHC2D471JC
EETHC2D561HJ
EETHC2D681HJ
EETHC2D681JJ
EETHC2D821HJ
EETHC2D821JJ
EETHC2D821KJ
EETHC2D102HJ
EETHC2D102JC
EETHC2D102JJ
EETHC2D102KJ
EETHC2D102LJ
EETHC2D122JC
EETHC2D122JJ
EETHC2D122KJ
EETHC2D122LJ
EETHC2D152KJ
EETHC2D152LJ
EETHC2D182KJ
EETHC2D182LJ
EETHC2D222KJ
EETHC2D222LJ
EETHC2Q271HJ
EETHC2Q331HJ
EETHC2Q391HJ
EETHC2Q471HJ
EETHC2Q471JC
EETHC2Q471JJ
EETHC2Q561HC
EETHC2Q561HJ
EETHC2Q561JJ
EETHC2Q681HC
EETHC2Q681JJ
EETHC2Q681KJ
EETHC2Q681LJ
EETHC2Q821HC
EETHC2Q821JJ
EETHC2Q821KJ
EETHC2Q821LJ
EETHC2Q102JC
EETHC2Q102JJ
EETHC2Q102KJ
EETHC2Q102LJ
EETHC2Q122JC
EETHC2Q122KJ
EETHC2Q122LJ
EETHC2Q152KC
EETHC2Q152KJ
EETHC2Q152LJ
EETHC2Q182KC
EETHC2Q182LJ
EETHC2Q222LC
Specification
Ripple
tan δ
Current
(120 Hz)
(120 Hz)
(+20 °C)
(+105 °C)
max.
(A r.m.s.)
1.31
0.15
1.45
0.15
1.45
0.15
1.67
0.15
1.75
0.15
1.75
0.15
2.04
0.15
2.04
0.15
2.04
0.15
2.30
0.15
2.30
0.15
2.30
0.15
2.30
0.15
2.30
0.15
2.65
0.15
2.65
0.15
2.65
0.15
2.65
0.15
2.80
0.15
2.80
0.15
3.08
0.15
3.08
0.15
3.48
0.15
3.48
0.15
1.10
0.15
1.26
0.15
1.34
0.15
1.48
0.15
1.48
0.15
1.48
0.15
1.67
0.15
1.67
0.15
1.67
0.15
1.78
0.15
1.78
0.15
1.78
0.15
1.78
0.15
2.04
0.15
2.04
0.15
2.04
0.15
2.04
0.15
2.33
0.15
2.33
0.15
2.33
0.15
2.33
0.15
2.65
0.15
2.65
0.15
2.65
0.15
2.80
0.15
2.80
0.15
2.80
0.15
3.11
0.15
3.11
0.15
3.50
0.15
Min. Packaging Q'ty
(pcs)
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
100
200
100
200
100
100
100
100
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
100
200
200
100
100
100
100
100
100
100
100
Endurance : 105 °C 2000 h, Terminal Pitch : 10 mm
✽When capacitors of φ35҂45L and φ35҂50L are mounted on PWB, reinforce them with mounting clamp or adhesives.
(Avoid using adhesives including halogenated compositions.)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Jul. 2008
Aluminum Electrolytic Capacitors/ HC
■ Standard Products
Case size
W.V.
Cap.
(120 Hz)
(±20 %)
(V. DC)
(µF)
270
330
390
470
560
250
680
820
1000
1200
✽
✽
✽
1500
1800
150
180
220
270
330
390
315
470
560
680
820
✽
1000
Dia.
Length
(mm)
22
22
25
22
22
25
22
22
25
30
22
22
25
30
22
22
25
30
35
25
30
35
25
30
35
30
35
35
35
35
22
22
22
22
25
22
25
30
22
25
30
35
25
30
25
30
35
30
35
30
35
35
(mm)
25
30
25
30
35
25
35
40
30
25
40
45
35
25
45
50
40
30
25
45
35
30
50
40
30
45
35
45
45
50
25
30
30
40
30
45
35
25
50
40
30
25
45
35
50
40
30
45
35
50
40
45
Part No.
PET sleeve
Terminal Length
4.0 mm
(Without Top Plate)
EETHC2E271HJ
EETHC2E331HJ
EETHC2E331JJ
EETHC2E391HC
EETHC2E391HJ
EETHC2E391JJ
EETHC2E471HC
EETHC2E471HJ
EETHC2E471JJ
EETHC2E471KJ
EETHC2E561HC
EETHC2E561HJ
EETHC2E561JJ
EETHC2E561KJ
EETHC2E681HC
EETHC2E681HJ
EETHC2E681JJ
EETHC2E681KJ
EETHC2E681LJ
EETHC2E821JJ
EETHC2E821KJ
EETHC2E821LJ
EETHC2E102JC
EETHC2E102KJ
EETHC2E102LJ
EETHC2E122KJ
EETHC2E122LJ
EETHC2E152LJ
EETHC2E182LC
EETHC2E182LJ
EETHC2F151HJ
EETHC2F181HJ
EETHC2F221HJ
EETHC2F271HC
EETHC2F271JJ
EETHC2F331HJ
EETHC2F331JJ
EETHC2F331KJ
EETHC2F391HC
EETHC2F391JJ
EETHC2F391KJ
EETHC2F391LJ
EETHC2F471JJ
EETHC2F471KJ
EETHC2F561JJ
EETHC2F561KJ
EETHC2F561LJ
EETHC2F681KJ
EETHC2F681LJ
EETHC2F821KJ
EETHC2F821LJ
EETHC2F102LJ
Specification
Ripple
tan δ
Current
(120 Hz)
(120 Hz)
(+20 °C)
(+105 °C)
max.
(A r.m.s.)
1.10
0.15
1.20
0.15
1.20
0.15
1.30
0.15
1.30
0.15
1.30
0.15
1.40
0.15
1.40
0.15
1.40
0.15
1.40
0.15
1.50
0.15
1.50
0.15
1.50
0.15
1.50
0.15
1.70
0.15
1.70
0.15
1.70
0.15
1.70
0.15
1.70
0.15
2.00
0.15
2.00
0.15
2.00
0.15
2.20
0.15
2.20
0.15
2.20
0.15
2.30
0.15
2.30
0.15
2.50
0.15
2.50
0.15
2.70
0.15
0.82
0.15
0.90
0.15
1.00
0.15
1.10
0.15
1.10
0.15
1.20
0.15
1.20
0.15
1.20
0.15
1.30
0.15
1.30
0.15
1.30
0.15
1.30
0.15
1.40
0.15
1.40
0.15
1.50
0.15
1.50
0.15
1.50
0.15
1.70
0.15
1.70
0.15
2.00
0.15
2.00
0.15
2.30
0.15
Min. Packaging Q'ty
(pcs)
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
100
200
200
100
200
100
100
100
100
100
200
200
200
200
200
200
200
200
200
200
200
200
200
100
200
100
200
100
100
100
100
100
Endurance : 105 °C 2000 h, Terminal Pitch : 10 mm
✽When capacitors of φ35҂45L and φ35҂50L are mounted on PWB, reinforce them with mounting clamp or adhesives.
(Avoid using adhesives including halogenated compositions.)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Jul. 2008
Aluminum Electrolytic Capacitors/ HC
■ Standard Products
Case size
W.V.
Cap.
(120 Hz)
(±20 %)
(V. DC)
(µF)
120
150
180
220
270
330
350
390
470
560
680
✽
✽
820
1000
Dia.
Length
(mm)
22
22
22
25
22
25
22
25
30
22
25
30
25
30
30
25
30
35
30
30
35
30
30
35
35
35
(mm)
25
30
30
25
35
30
40
35
25
45
40
30
45
30
35
50
35
30
40
45
35
45
50
40
45
50
Part No.
PET sleeve
Terminal Length
4.0 mm
(Without Top Plate)
EETHC2V121HJ
EETHC2V151HJ
EETHC2V181HJ
EETHC2V181JJ
EETHC2V221HJ
EETHC2V221JJ
EETHC2V271HC
EETHC2V271JJ
EETHC2V271KJ
EETHC2V331HC
EETHC2V331JJ
EETHC2V331KJ
EETHC2V391JJ
EETHC2V391KC
EETHC2V391KJ
EETHC2V471JJ
EETHC2V471KC
EETHC2V471LJ
EETHC2V561KC
EETHC2V561KJ
EETHC2V561LJ
EETHC2V681KC
EETHC2V681KJ
EETHC2V681LJ
EETHC2V821LJ
EETHC2V102LC
Specification
Ripple
tan δ
Current
(120 Hz)
(120 Hz)
(+20 °C)
(+105 °C)
max.
(A r.m.s.)
0.75
0.15
0.82
0.15
0.90
0.15
0.90
0.15
1.00
0.15
1.00
0.15
1.10
0.15
1.10
0.15
1.10
0.15
1.20
0.15
1.20
0.15
1.20
0.15
1.30
0.15
1.30
0.15
1.30
0.15
1.40
0.15
1.40
0.15
1.40
0.15
1.50
0.15
1.50
0.15
1.50
0.15
1.70
0.15
1.70
0.15
1.70
0.15
1.90
0.15
1.90
0.15
Min. Packaging Q'ty
(pcs)
200
200
200
200
200
200
200
200
200
200
200
200
200
200
100
200
100
200
100
100
100
100
100
100
100
100
Endurance : 105 °C 2000 h, Terminal Pitch : 10 mm
✽When capacitors of φ35҂45L and φ35҂50L are mounted on PWB, reinforce them with mounting clamp or adhesives.
(Avoid using adhesives including halogenated compositions.)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Jul. 2008
Aluminum Electrolytic Capacitors/ HC
■ Standard Products
Case size
W.V.
Cap.
(120 Hz)
(±20 %)
(V. DC)
(µF)
100
120
150
180
220
270
400
330
390
470
560
✽
✽
680
820
Dia.
Length
(mm)
22
22
22
25
22
25
22
22
25
30
22
22
25
30
35
25
30
30
35
25
30
30
35
30
35
30
30
35
35
35
(mm)
25
30
30
25
35
30
40
45
35
25
45
50
40
30
25
45
30
35
30
50
35
40
30
45
35
45
50
40
45
50
Part No.
PET sleeve
Terminal Length
4.0 mm
(Without Top Plate)
EETHC2G101HJ
EETHC2G121HJ
EETHC2G151HJ
EETHC2G151JC
EETHC2G181HJ
EETHC2G181JJ
EETHC2G221HC
EETHC2G221HJ
EETHC2G221JJ
EETHC2G221KJ
EETHC2G271HC
EETHC2G271HJ
EETHC2G271JJ
EETHC2G271KJ
EETHC2G271LJ
EETHC2G331JJ
EETHC2G331KC
EETHC2G331KJ
EETHC2G331LJ
EETHC2G391JJ
EETHC2G391KC
EETHC2G391KJ
EETHC2G391LJ
EETHC2G471KJ
EETHC2G471LJ
EETHC2G561KC
EETHC2G561KJ
EETHC2G561LJ
EETHC2G681LJ
EETHC2G821LJ
Specification
Ripple
tan δ
Current
(120 Hz)
(120 Hz)
(+20 °C)
(+105 °C)
max.
(A r.m.s.)
0.70
0.15
0.75
0.15
0.88
0.15
0.88
0.15
0.95
0.15
0.95
0.15
1.10
0.15
1.10
0.15
1.10
0.15
1.10
0.15
1.22
0.15
1.22
0.15
1.22
0.15
1.22
0.15
1.22
0.15
1.44
0.15
1.44
0.15
1.44
0.15
1.44
0.15
1.55
0.15
1.55
0.15
1.55
0.15
1.55
0.15
1.68
0.15
1.68
0.15
1.90
0.15
1.90
0.15
1.90
0.15
2.12
0.15
2.30
0.15
Min. Packaging Q'ty
(pcs)
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
100
200
200
100
100
200
100
100
100
100
100
100
100
Endurance : 105 °C 2000 h, Terminal Pitch : 10 mm
✽When capacitors of φ35҂45L and φ35҂50L are mounted on PWB, reinforce them with mounting clamp or adhesives.
(Avoid using adhesives including halogenated compositions.)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Jul. 2008
Aluminum Electrolytic Capacitors/ HC
■ Standard Products
Case size
W.V.
Cap.
(120 Hz)
(±20 %)
(V. DC)
(µF)
100
120
150
180
220
270
420
330
390
470
560
✽
✽
✽
680
Dia.
Length
(mm)
22
22
25
22
25
22
25
30
22
25
30
22
25
30
35
25
25
30
35
30
35
35
30
35
30
35
35
35
35
(mm)
25
30
25
35
30
40
30
25
45
35
25
50
40
30
25
45
50
35
35
40
30
35
45
35
50
40
45
45
50
Part No.
PET sleeve
Terminal Length
4.0 mm
(Without Top Plate)
EETHC2S101HJ
EETHC2S121HJ
EETHC2S121JJ
EETHC2S151HJ
EETHC2S151JJ
EETHC2S181HJ
EETHC2S181JJ
EETHC2S181KJ
EETHC2S221HJ
EETHC2S221JJ
EETHC2S221KJ
EETHC2S271HJ
EETHC2S271JJ
EETHC2S271KJ
EETHC2S271LJ
EETHC2S331JC
EETHC2S331JJ
EETHC2S331KJ
EETHC2S331LJ
EETHC2S391KJ
EETHC2S391LC
EETHC2S391LJ
EETHC2S471KJ
EETHC2S471LJ
EETHC2S561KJ
EETHC2S561LC
EETHC2S561LJ
EETHC2S681LC
EETHC2S681LJ
Specification
Ripple
tan δ
Current
(120 Hz)
(120 Hz)
(+20 °C)
(+105 °C)
max.
(A r.m.s.)
0.70
0.15
0.74
0.15
0.74
0.15
0.84
0.15
0.84
0.15
0.91
0.15
0.91
0.15
0.91
0.15
1.05
0.15
1.05
0.15
1.05
0.15
1.20
0.15
1.20
0.15
1.20
0.15
1.20
0.15
1.42
0.15
1.42
0.15
1.42
0.15
1.42
0.15
1.55
0.15
1.55
0.15
1.55
0.15
1.71
0.15
1.71
0.15
1.90
0.15
1.90
0.15
1.90
0.15
2.10
0.15
2.10
0.15
Min. Packaging Q'ty
(pcs)
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
100
100
100
200
100
100
100
100
100
100
100
100
Endurance : 105 °C 2000 h, Terminal Pitch : 10 mm
✽When capacitors of φ35҂45L and φ35҂50L are mounted on PWB, reinforce them with mounting clamp or adhesives.
(Avoid using adhesives including halogenated compositions.)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Jul. 2008
Aluminum Electrolytic Capacitors/ HC
■ Standard Products
Case size
W.V.
Cap.
(120 Hz)
(±20 %)
(V. DC)
(µF)
100
120
150
180
220
450
270
330
390
470
✽
✽
560
Dia.
Length
(mm)
22
25
22
25
22
22
25
30
22
25
25
30
30
22
25
25
30
35
25
25
30
30
35
25
30
30
35
35
30
30
35
35
30
35
35
35
(mm)
30
25
35
30
35
40
30
25
45
35
40
25
30
50
40
45
30
25
45
50
35
40
30
50
40
45
30
35
45
50
35
40
50
40
45
50
Part No.
PET sleeve
Terminal Length
4.0 mm
(Without Top Plate)
EETHC2W101HJ
EETHC2W101JJ
EETHC2W121HJ
EETHC2W121JJ
EETHC2W151HC
EETHC2W151HJ
EETHC2W151JJ
EETHC2W151KJ
EETHC2W181HJ
EETHC2W181JC
EETHC2W181JJ
EETHC2W181KC
EETHC2W181KJ
EETHC2W221HJ
EETHC2W221JC
EETHC2W221JJ
EETHC2W221KJ
EETHC2W221LJ
EETHC2W271JC
EETHC2W271JJ
EETHC2W271KC
EETHC2W271KJ
EETHC2W271LJ
EETHC2W331JC
EETHC2W331KC
EETHC2W331KJ
EETHC2W331LC
EETHC2W331LJ
EETHC2W391KC
EETHC2W391KJ
EETHC2W391LC
EETHC2W391LJ
EETHC2W471KC
EETHC2W471LC
EETHC2W471LJ
EETHC2W561LJ
Specification
Ripple
tan δ
Current
(120 Hz)
(120 Hz)
(+20 °C)
(+105 °C)
max.
(A r.m.s.)
0.64
0.20
0.64
0.20
0.72
0.20
0.72
0.20
0.79
0.20
0.79
0.20
0.79
0.20
0.79
0.20
0.87
0.20
0.87
0.20
0.87
0.20
0.87
0.20
0.87
0.20
1.00
0.20
1.00
0.20
1.00
0.20
1.00
0.20
1.00
0.20
1.19
0.20
1.19
0.20
1.19
0.20
1.19
0.20
1.19
0.20
1.38
0.20
1.38
0.20
1.38
0.20
1.38
0.20
1.38
0.20
1.55
0.20
1.55
0.20
1.55
0.20
1.55
0.20
1.74
0.20
1.74
0.20
1.74
0.20
1.90
0.20
Min. Packaging Q'ty
(pcs)
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
100
100
200
200
100
100
200
100
100
100
100
100
100
100
100
100
Endurance : 105 °C 2000 h, Terminal Pitch : 10 mm
✽When capacitors of φ35҂45L and φ35҂50L are mounted on PWB, reinforce them with mounting clamp or adhesives.
(Avoid using adhesives including halogenated compositions.)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Jul. 2008
Aluminum Electrolytic Capacitors/ HC (L:20 mm)
■ Standard Products (L:20 mm)
Case size
Part No.
PET sleeve
Terminal Length
4.0 mm
(Without Top Plate)
Specification
Ripple
tan δ
Current
(120 Hz)
(120 Hz)
(+20 °C)
(+105 °C)
max.
(A r.m.s.)
Min. Packaging Q'ty
W.V.
Cap.
(120 Hz)
(±20 %)
Dia.
Length
(V. DC)
(µF)
(mm)
max.
(mm)
220
22
20
EETHC2D221HJ
0.85
0.15
200
270
25
20
EETHC2D271JJ
0.95
0.15
200
330
30
20
EETHC2D331KJ
1.10
0.15
200
390
30
20
EETHC2D391KJ
1.20
0.15
200
470
35
20
EETHC2D471LJ
1.41
0.15
200
560
35
20
EETHC2D561LJ
1.48
0.15
200
150
22
20
EETHC2E151HJ
0.69
0.15
200
180
25
20
EETHC2E181JJ
0.77
0.15
200
220
30
20
EETHC2E221KJ
0.95
0.15
200
270
30
20
EETHC2E271KJ
1.00
0.15
200
330
35
20
EETHC2E331LJ
1.16
0.15
200
200
250
400
450
(pcs)
390
35
20
EETHC2E391LJ
1.30
0.15
200
56
22
20
EETHC2G560HJ
0.40
0.15
200
68
25
20
EETHC2G680JJ
0.49
0.15
200
82
30
20
EETHC2G820KJ
0.55
0.15
200
100
30
20
EETHC2G101KJ
0.60
0.15
200
120
35
20
EETHC2G121LJ
0.75
0.15
200
150
35
20
EETHC2G151LJ
0.80
0.15
200
39
22
20
EETHC2W390HJ
0.36
0.20
200
47
25
20
EETHC2W470JJ
0.41
0.20
200
56
25
20
EETHC2W560JJ
0.43
0.20
200
68
30
20
EETHC2W680KJ
0.50
0.20
200
82
30
20
EETHC2W820KJ
0.53
0.20
200
100
35
20
EETHC2W101LJ
0.61
0.20
200
Endurance : 105 °C 2000 h, Terminal Pitch : 10 mm
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Jul. 2008