ZETTLER AZ2151-1A-24D Miniature power relay Datasheet

AZ2150
MINIATURE
POWER RELAY
FEATURES
• 30 Amp switching capability for both N.O. and
N.C. contacts
• 1 Form A, B and C contacts available
• Life expectancy to 10 million operations
• Class B insulation standard
• Class F (155°C) version available
• Available with an epoxy seal for automatic wave
soldering and immersion cleaning
• Proof Tracking Index (PTI/CTI) 175
• UL, CUR file E44211 including versions meeting
UL 508 and UL 873 spacing and contact rating
requirements;
• VDE certificate 40023154 (AZ2150-1A and 1C only)
CONTACTS
Arrangement
Ratings
SPDT (1 Form C),
SPST (1 Form A and 1 Form B)
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 107
1 x 105 at 30 A 120 VAC Res. (N.O.)
Operate Time
Max. 12 ms
Typical: 8 ms
Release Time
Max. 5 ms
Typical: 3.5 ms
Resistive load:
Max. switched power: 900 W or 7200 VA
Max. switched current: 30 A
Max. switched voltage: 30 VDC* or 300 VAC
Dielectric Strength
2500 Vrms coil to contact
(at sea level for 1 min.) 1500 Vrms between open contacts
Insulation Resistance
1000 megohms min. at 500 VDC, 20°C
50% RH
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature
Operating
At nominal coil voltage
-55°C (-67°F) to 85°C (185°F)
Vibration
0.062" (1.5 mm) DA at 10–55 Hz
Shock
20 g
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp.
80°C (176°F)
Max. Immersion Time
30 seconds
Weight
25 grams
* Note: If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
Rated Load
UL, CUR
VDE
See chart for UL contact ratings on page 2.
AZ2150 series meets UL 508 group A spacing
and UL 873 refrigeration and safety control
requirements. AZ2151 series meets UL 508
group B spasing requirements.
Class F coil wire version - 1 Form A
25 A at 250 VAC, resistive, 10k cycles
Class B coil wire version - 1 Form A
20 A at 250 VAC, resistive, 10k cycles
Class B & F coil wire version - 1 Form C
N.O.: 20 A at 250 VAC, resistive, 10k cycles
N.C.: 10 A at 250 VAC, resistive, 10k cycles
Material
Silver cadmium oxide
Resistance
< 20 milliohms initially
(at rated current, voltage drop method)
NOTES
1.
2.
3.
4.
All values at 20°C (68°F).
Relay may pull in with less than “Must Operate” value.
Unsealed relays should not be dip cleaned.
Other coil resistances and sensitivities available upon request.
Please call the factory.
5. Specifications subject to change without notice.
COIL
Power
At Pickup Voltage
(typical)
500 mW
Max. Continuous
Dissipation
2.2 W at 20°C (68°F) ambient
1.8 W at 40°C (104°F) ambient
Temperature Rise
43°C (77°F) at nominal coil voltage
Temperature
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
Max. 130°C (266°F) Class B
Max. 155°C (311°F) Class F
-
A ZETTLER GROUP
Company
phone: +49 89 800 97-0 [email protected]
fax:
+49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
2014-07-03
AZ2150
Maximum Switching Capacity
RELAY ORDERING DATA
STANDARD RELAYS: 1 Form A (SPST); 508 Group A; UL 873 Version
COIL SPECIFICATIONS
ORDER NUMBER*
Max.
Continuous
VDC
5
6
9
12
15
18
24
48
70
110
7.3
8.9
13.9
17.5
22.5
27.4
36.1
68.4
104.4
163.2
Coil
Resistance
±10%
27
40
97
155
256
380
660
2,560
5,500
13,450
Must
Operate
VDC
3.75
4.5
6.75
9.0
11.25
13.5
18.0
36.0
52.5
82.5
Unsealed
20
Sealed
AZ2150–1A–5D
AZ2150–1A–6D
AZ2150–1A–9D
AZ2150–1A–12D
AZ2150–1A–15D
AZ2150–1A–18D
AZ2150–1A–24D
AZ2150–1A–48D
AZ2150–1A–70D
AZ2150–1A–110D
AZ2150–1A–5DE
AZ2150–1A–6DE
AZ2150–1A–9DE
AZ2150–1A–12DE
AZ2150–1A–15DE
AZ2150–1A–18DE
AZ2150–1A–24DE
AZ2150–1A–48DE
AZ2150–1A–70DE
AZ2150–1A–110DE
10
8
AMPERES
Nominal
Coil
VDC
30
AC RESISTIVE
LOAD
6
5
4
DC RESISTIVE
LOAD
3
2
1
10
20
30
40
STANDARD RELAYS: 1 Form A (SPST); UL 508 Group B Version
COIL SPECIFICATIONS
ORDER NUMBER*
7.3
8.9
13.9
17.5
22.5
27.4
36.1
68.4
104.4
163.2
27
40
97
155
256
380
660
2,560
5,500
13,450
3.75
4.5
6.75
9.0
11.25
13.5
18.0
36.0
52.5
82.5
AZ2151–1A–5D
AZ2151–1A–6D
AZ2151–1A–9D
AZ2151–1A–12D
AZ2151–1A–15D
AZ2151–1A–18D
AZ2151–1A–24D
AZ2151–1A–48D
AZ2151–1A–70D
AZ2151–1A–110D
Load Type
Cycles
Volts
Form A
(NO)
General Purpose
(Inductive)
Resistive
100,000
30,000
100,000
100,000
100,000
100,000
6,000
30,000
30,000
100,000
6,000
125 or 240 VAC
277 VAC
125 or 240 VAC
30 VDC
277 VAC
240 VAC
277 VAC
125 VAC
240 VAC
125 or 277 VAC
125 VAC
30 A
30 A
30 A
20 A
20 A
15 A
6A
800 VA
690 VA
690 VA
1 HP
15 A
30 A
15 A
10 A
—
—
3A
275 VA
275 VA
—
1/ HP
4
30 A
30 A
—
20 A
—
—
6A
470 VA
470 VA
690 VA
1 HP
15 A
30 A
—
10 A
—
—
3A
275 VA
275 VA
—
1/ HP
4
6,000
30,000
100,000
240 VAC
125 VAC
125 or 277 VAC
2 HP
1 HP
3/ HP
4
1 HP
—
—
2 HP
1 HP
3/ HP
4
1 HP
—
—
30,000
125 VAC
Motor Load
Definite Purpose
(LRA-Locked Rotor)
(FLA-Full Load)
Tungsten
100,000
125 VAC
30,000
240 VAC
100,000
277 VAC
6,000
125 VAC
6,000
240 VAC
6,000
120 VAC
6,000
240 VAC
TV–5
25,000
120 VAC
TV–3
25,000
120 VAC
Note: See AZ2100 Data Sheet for more complete
40%
60%
80%
100%
120%
140%
160%
180%
200%
Percent of Nominal Coil Voltage (at 20˚C)
33 LRA
10 FLA
—
—
33 LRA
10 FLA
—
—
—
3A
—
—
TV–3
TV–3
.020
.130 +– .010
0.51)
(3.3 +– 0.25
.090
(2.3)
.200
(5.1)
.500
(12.7)
.690
(17.5)
1.25
(31.80)
.110
(2.8)
.045 x .045
(1.14 x 1.14)
.751
(19.1)
.196
(5.0)
1.06
(26.9)
.032 x .062
(0.81 x 1.57)
Viewed toward
terminals
Viewed toward
terminals
4 x ø .079
(ø 2.0)
.400 .300
(10.2) (7.6)
.025 x .025
(0.63 x 0.63)
WIRING DIAGRAM
PC BOARD LAYOUT
AZ2150 VERSION
1.00
(25.38)
.900
(22.86)
1 FORM A
(SPST-NO)
2 x ø .044
(ø 1.0)
1 FORM C
(SPDT)
1 FORM B
(SPST-NC)
AZ2151 VERSION
Terminal
Eliminated
on AZ2150
Versions
.150 (3.8)
.350 (8.9)
.550 (14.0)
.700
(17.8)
1 FORM A
(SPST-NO)
1 FORM B
(SPST-NC)
1 FORM C
(SPDT)
Dimensions in inches with metric equivalents in parentheses.
Tolerance: ± .010"
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
0
Form C
NO
NC
96 LRA
33 LRA
60 LRA
30 FLA
10 FLA
20 FLA
82.8 LRA
—
82.8 LRA
27 FLA
—
27 FLA
80 LRA
33 LRA
60 LRA
30 FLA
10 FLA
20 FLA
60 LRA
—
60 LRA
20 FLA
—
20 FLA
15 A
—
15 A
5A
—
5A
—
3A
—
—
3A
—
TV–5
—
TV–5
—
TV–3
—
UL and CUR approved contact ratings.
300
MECHANICAL DATA
UL/CUR File E44211 Approved Contact Ratings
Ballast
Pilot Duty
200
AZ2151–1A–5DE
Coil Temperature Rise
AZ2151–1A–6DE
180
AZ2151–1A–9DE
160
AZ2151–1A–12DE
140
AZ2151–1A–15DE
120
AZ2151–1A–18DE
100
AZ2151–1A–24DE
80
30A
60 25A
AZ2151–1A–48DE
40 20A
AZ2151–1A–70DE
15A
20 0A
AZ2151–1A–110DE
* Substitute “1B” or “1C” in place of the “1A” to indicate 1 Form B and 1 Form C respectively. To indicate Class F
version, add suffix “F”.
Form B
(NC)
80 100
Coil Temperature Rise ˚C
5
6
9
12
15
18
24
48
70
110
60
VOLTAGE
-
A ZETTLER GROUP
Company
phone: +49 89 800 97-0 [email protected]
fax:
+49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
2014-07-03
Similar pages