Analog Power AM130N07-06m3P N-Channel 70-V (D-S) MOSFET Key Features: • Low rDS(on) trench technology • Low thermal impedance • Fast switching speed VDS (V) 75 Typical Applications: • White LED boost converters • Automotive Systems • Industrial DC/DC Conversion Circuits PRODUCT SUMMARY rDS(on) (mΩ) 6.3 @ VGS = 10V 7.5 @ VGS = 4.5V 130a DRAIN connected to TAB ABSOLUTE MAXIMUM RATINGS (TA = 25°C UNLESS OTHERWISE NOTED) Parameter Symbol Limit VDS Drain-Source Voltage 75 VGS Gate-Source Voltage ±20 TC=25°C ID 130 Continuous Drain Current a IDM Pulsed Drain Current b 520 a TC=25°C IS 130 Continuous Source Current (Diode Conduction) a T =25°C P 300 Power Dissipation C D TJ, Tstg -55 to 175 Operating Junction and Storage Temperature Range THERMAL RESISTANCE RATINGS Parameter Maximum Junction-to-Ambient Maximum Junction-to-Case ID (A) c Symbol Maximum RθJA 62.5 RθJC 0.5 Units V A A W °C Units °C/W Notes a. Package Limited b. Pulse width limited by maximum junction temperature c. Surface Mounted on 1” x 1” FR4 Board. © Preliminary 1 Publication Order Number: DS_AM130N07-06m3P_1A Analog Power AM130N07-06m3P Electrical Characteristics Parameter Symbol Gate-Source Threshold Voltage Gate-Body Leakage VGS(th) IGSS Zero Gate Voltage Drain Current IDSS On-State Drain Current a ID(on) Drain-Source On-Resistance a rDS(on) Forward Transconductance a Diode Forward Voltage a gfs VSD Test Conditions Static VDS = VGS, ID = 250 uA VDS = 0 V, VGS = ±20 V VDS = 56 V, VGS = 0 V VDS = 56 V, VGS = 0 V, TJ = 55°C VDS = 5 V, VGS = 10 V VGS = 10 V, ID = 45 A VGS = 4.5 V, ID = 40 A VDS = 15 V, ID = 20 A IS = 65 A, VGS = 0 V Min Typ Max 1 ±100 1 10 50 Unit V nA uA A 6.3 7.5 17 0.93 mΩ S V Dynamic b Total Gate Charge Gate-Source Charge Gate-Drain Charge Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Input Capacitance Output Capacitance Reverse Transfer Capacitance Qg Qgs Qgd td(on) tr td(off) tf Ciss Coss Crss VDS = 37.5 V, VGS = 4.5 V, ID = 20 A VDS = 37.5 V, RL = 1.9 Ω, ID = 20 A, VGEN = 10 V, RGEN = 6 Ω VDS = 15 V, VGS = 0 V, f = 1 Mhz 61 17 22 19 16 162 47 7001 398 339 nC ns pF Notes a. Pulse test: PW <= 300us duty cycle <= 2%. b. Guaranteed by design, not subject to production testing. Analog Power (APL) reserves the right to make changes without further notice to any products herein. APL makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does APL assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in APL data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. APL does not convey any license under its patent rights nor the rights of others. APL products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the APL product could create a situation where personal injury or death may occur. Should Buyer purchase or use APL products for any such unintended or unauthorized application, Buyer shall indemnify and hold APL and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that APL was negligent regarding the design or manufacture of the part. APL is an Equal Opportunity/Affirmative Action Employer. © Preliminary 2 Publication Order Number: DS_AM130N07-06m3P_1A Analog Power AM130N07-06m3P Typical Electrical Characteristics 0.02 30 0.015 ID - Drain Current (A) RDS(on) - On-Resistance(Ω) TJ = 25°C 3V 0.01 0.005 20 10 3.5V,4V,4.5V,6V,8V,10V 0 0 0 10 20 0 30 ID-Drain Current (A) 3 4 5 2. Transfer Characteristics 0.04 100 TJ = 25°C ID = 20A TJ = 25°C 0.03 IS - Source Current (A) RDS(on) - On-Resistance(Ω) 2 VGS - Gate-to-Source Voltage (V) 1. On-Resistance vs. Drain Current 0.02 0.01 0 10 1 0.1 0.01 0 2 4 6 8 10 0.2 0.4 0.6 0.8 1 VSD - Source-to-Drain Voltage (V) VGS - Gate-to-Source Voltage (V) 3. On-Resistance vs. Gate-to-Source Voltage 4. Drain-to-Source Forward Voltage 30 9000 F = 1MHz 10V,8V,6V,4.5V,4V 8000 3.5V Ciss 7000 Capacitance (pf) ID - Drain Current (A) 1 20 3V 10 6000 5000 4000 3000 2000 2.5V Coss 1000 0 Crss 0 0 0.1 0.2 0.3 0.4 0 10 15 20 VDS-Drain-to-Source Voltage (V) VDS - Drain-to-Source Voltage (V) 5. Output Characteristics © Preliminary 5 6. Capacitance 3 Publication Order Number: DS_AM130N07-06m3P_1A Analog Power AM130N07-06m3P Typical Electrical Characteristics 2 VDS = 35V ID = 20A RDS(on) - On-Resistance(Ω) (Normalized) VGS-Gate-to-Source Voltage (V) 10 8 6 4 2 0 1.5 1 0.5 0 50 100 150 -50 -25 Qg - Total Gate Charge (nC) 25 50 75 100 125 150 TJ -JunctionTemperature(°C) 7. Gate Charge 8. Normalized On-Resistance Vs Junction Temperature 10000 PEAK TRANSIENT POWER (W) 700 1000 10 uS 100 uS ID Current (A) 0 1 mS 100 10 mS 100 mS 10 1 SEC 10 SEC 1 100 SEC DC 1 0.1 Idm limit 600 500 400 300 200 100 Limited by RDS 0.01 0.1 1 10 100 0 0.001 1000 0.01 0.1 1 10 100 1000 VDS Drain to Source Voltage (V) t1 TIME (SEC) 9. Safe Operating Area 10. Single Pulse Maximum Power Dissipation 1 D = 0.5 RθJA(t) = r(t) + RθJA 0.2 0.1 RθJA = 62.5 °C /W 0.1 0.05 P(pk) 0.02 t1 t2 0.01 TJ - TA = P * RθJA(t) Duty Cycle, D = t1 / t2 Single Pulse 0.001 0.0001 0.001 0.01 0.1 1 10 100 1000 t1 TIME (sec) 11. Normalized Thermal Transient Junction to Ambient © Preliminary 4 Publication Order Number: DS_AM130N07-06m3P_1A Analog Power AM130N07-06m3P Package Information DIM. A A1 A2 B b b2 c D D1 D2 E E1 e L ØP Q Option 1 Option 2 MILLIMETERS MIN MAX 4.24 4.72 1.11 1.41 2.22 2.7 2.6 3.9 0.66 0.94 1.17 1.45 0.4 0.6 14.5 15.74 8.4 9.65 12.08 12.48 9.7 10.54 8 8.4 2.49 2.59 12.27 14.5 3.55 3.89 2.58 2.98 Option 3 Analog Power (APL) reserves the right to make changes without further notice to any products herein. APL makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does APL assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in APL data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. APL does not convey any license under its patent rights nor the rights of others. APL products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the APL product could create a situation where personal injury or death may occur. Should Buyer purchase or use APL products for any such unintended or unauthorized application, Buyer shall indemnify and hold APL and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that APL was negligent regarding the design or manufacture of the part. APL is an Equal Opportunity/Affirmative Action Employer. © Preliminary 5 Publication Order Number: DS_AM130N07-06m3P_1A