BTCPower TM Broadband TelCom Power, Inc. Redefining “Current” Limits In Power Conversion BSIP10-12 BSMT10-12 Series 10A SIP & SMT 12V Input DC-DC Converters Features • • • • • • • • • Industry standard pin out High efficiency to 95% 300KHz switching frequency 9.0 – 14 Vdc input range Over temperature protection Continuous short circuit protection Remote On/Off Cost efficient open frame design UL / cUL 60950 certified Model Number Input Voltage Output Voltage Output Current Input Current No Load Full Load % Efficiency BSIP10-12-100 / BSMT10-12-100 9.0 -14 Vdc 1.0 Vdc 10A 50 mA 992 mA 84 BSIP10-12-120 / BSMT10-12-120 9.0 -14 Vdc 1.2 Vdc 10A 50 mA 1163 mA 86 BSIP10-12-150 / BSMT10-12-150 BSIP10-12-180 / BSMT10-12-180 9.0 -14 Vdc 9.0 -14 Vdc 1.5 Vdc 1.8 Vdc 10A 10A 50 mA 60 mA 1404 mA 1666 mA 89 90 BSIP10-12-200 / BSMT10-12-200 9.0 -14 Vdc 2.0 Bdc 10A 60 mA 1832 mA 91 BSIP10-12-250 / BSMT10-12-250 9.0 -14 Vdc 2.5 Vdc 10A 60 mA 2264 mA 92 BSIP10-12-330 / BSMT10-12-330 9.0 -14 Vdc 3.3 Vdc 10A 70 mA 2956 mA 93 BSIP10-12-500 / BSMT10-12-500 9.0 -14 Vdc 5.0 Vdc 10A 70 mA 4385 mA 95 BSIP10-12-500A / BSMT10-12-500A 8.3 -14 Vdc 0.75-5.0 Vdc 10A 70 mA 2956 mA 93% @ 3.3Vo Broadband TelCom Power, Inc. – 1719 S. Grand Avenue, Santa Ana, CA 92705 U.S.A. Tel.: 714-259-4888 • Fax: 714-259-0840• www.btcpower.com • Email: [email protected] DS BSIP10-12 Rev1 10-26-04 BSIP10-12 Series 10A SIP&SMT 12Vi DC-DC Converters BTCPower TM Specifications Input Specifications: Input Voltage Range…………….………12V………………... 9.0-14V Under voltage lock-out ………………power up ……………8.0V Typ. Power down ………..7.7V Typ. Input Filter……………………………………………………Capacitive Positive remove on /off control: Module On …………………………Open circuit or =Vin Over temperature protection ………………….………….. 120 ºC Typ. Operating Temperature Range…………………………-40ºC ~ +85ºC Power derating curve …………………………………….. see fig. 1,2. Storage Temperature Range……………………..…..-55 ºC ~ +125ºC Dimensions: SIP package: 2.0” x 0.512” x 0.327“ (50.8 x 13.0 x 8.3 mm) Module Off …………………………………….. < 0.4Vdc Output Specifications: Voltage Accuracy…………….. ………………………….+/- 1.5 % max. Transient response : 25% step load change ……………< 200 u sec. Ripple & Noise, 20 MHz BW (note3)………………….50 mV p-p max. 5Vo ………………………………...75 mV p-p max. Temperature Coeffcient………………………… +/- 0.03 % / ºC max. Short Circuit Protection………………………………..……Continuous Line Regulation (note1) ………………………….……..+/- 0.2 % max. Load Regulation (note2) …… …………….…….….….+/- 0.5 % max. Capacitive load, low ESR…………………………………8000uF max. General Specifications: SMT package: 1.3” x 0.53” x 0.366” (33.0 x 12.46 x 9.3 mm) Structure …………………………..Non-potted with open frame type Note: 1. Measured from high line to low line; 2. Measured from full load to zero load; 3. Measured with 10uF tantalum capacitor and 1 uF ceramic capacitor across output 4. The input terminal recommend to parallel with 100uF capacitor ESR < 20 mohm 5. Suffix “N” to the model number with Negative logic remote Model On: Open circuit or < 0.4Vdc Model Off: > +2.8Vdc to Vin Efficiency………………………………………………..……...see table Isolation Resistance………………………………………Non-isolation Switching Frequency……………………………………..300 KHz, Typ. Outline Information and Pin-out SMT Outline information Broadband TelCom Power, Inc. – 1719 S. Grand Avenue, Santa Ana, CA 92705 U.S.A. Tel.: 714-259-4888 • Fax: 714-259-0840• www.btcpower.com • Email: [email protected] DS BSIP10-12 Rev1 10-26-04 BSIP10-12 Series 10A SIP&SMT 12Vi DC-DC Converters BTCPower SIP Outline Inforamtion Dimensions are in Inches (millimeters) Tolerances: .XX ± 0.2” (.X ±0.5), unless otherwise noted .XXX ±0.01” (.XX ±0.25) PIN CONNECTION Pin Function 1 + Output 2 + Output 3 + Sense 4 + Output 5 Common 6 Common 7 + V Input 8 + V Input 9 No Pin 10 Trim 11 On / Off Control Broadband TelCom Power, Inc. – 1719 S. Grand Avenue, Santa Ana, CA 92705 U.S.A. Tel.: 714-259-4888 • Fax: 714-259-0840• www.btcpower.com • Email: [email protected] DS BSIP10-12 Rev1 10-26-04 TM BSIP10-12 Series BTCPower 10A SIP&SMT 12Vi DC-DC Converters TM Product Brief Temperature Typical Derating Curve Fig 1.: Typical Derating Curve of BSIP10-12 series Fig 2.: Typical Derating Curve of BSMT10-12 series Trim Resistor Values Vo (set) (V) Rtrim (Kohm) 0.75 Open 1.2 22.33 1.5 13 1.8 9 2 7.4 2.5 5 3.3 3.12 3.63 1.47 Fig 3.: Simplified Schematic The information and specifications contained in this brief are believed to be accurate and reliable at the time of publication. Specifications are subject to change without notice. Refer to product specification sheet for performance characteristics and application guidelines. Broadband TelCom Power, Inc. – 1719 S. Grand Avenue, Santa Ana, CA 92705 U.S.A. Tel.: 714-259-4888 • Fax: 714-259-0840• www.btcpower.com • Email: [email protected] DS BSIP10-12 Rev1 10-26-04