Preliminary Datasheet Two Phase Dual-coil High Voltage Smart Fan Motor Driver General Description Features The AH9280 is a most advanced smart fan controller and Hall IC driver manufactured by special CMOS process. It is designed for 5V, 12V and 24V cooling fan. To allow survival in a harsh environment and lower the total system cost, the AH9280 has been designed with many powerful functions while almost eliminating all discrete components, such as, capacitor, resistor, transistor, diode and PC board. • • • • • • • • The AH9280 can operate normally in an ambient temperature up to 125°C due to its Hall IC circuitry and power MOSFET output that allow low power dissipation. AH9280 High-sensitivity Integrated Hall Sensor Low Start-up Voltage 5V, 12V and 24V Operation Peak Output Current up to 1200mA Power-efficient CMOS and Power MOSFETs Built-in Output Protection Clamping Diode Locked Rotor Shutdown and Auto-restart ESD Rating: 6000V (Human Body Model) 400V (Machine Model) Applications • • • • When there is no motion for one second, the IC will automatically detect the locked rotor conditions, and enter protection mode, shutting off the motor driver for five seconds. Then, the IC will turn on the motor driver for one second to detect whether there is rotation condition, if fails, the IC will shut off motor driver for five seconds again. This sequence will be repeated until rotation condition is detected, and the IC enters normal operation. This feature can effectively prevent the AH9280 from overheating and damage due to long-time locked rotor condition. 5V/12V/24V DC Brushless Motor/Fan PC, Server, Laptop Cooling Fan Power Supply Cooling Fan Large/Small Sized Fan Specially designed for driving large fans, the AH9280 is optimized for low start-up voltage. The AH9280 is available in TO-94 package. TO-94 Figure 1. Package Type of AH9280 Mar. 2010 Rev. 1. 0 BCD Semiconductor Manufacturing Limited 1 Preliminary Datasheet Two Phase Dual-coil High Voltage Smart Fan Motor Driver AH9280 Pin Configuration Z4 Package (TO-94) 4 3 2 1 Figure 2. Pin Configuration of AH9280 (Front View) Pin Description Pin Number Pin Name 1 VCC 2 DO Output pin 1 3 DOB Output pin 2 4 GND Ground pin Mar. 2010 Function Power supply pin Rev. 1. 0 BCD Semiconductor Manufacturing Limited 2 Preliminary Datasheet Two Phase Dual-coil High Voltage Smart Fan Motor Driver AH9280 Functional Block Diagram Figure 3. Functional Block Diagram of AH9280 Ordering Information AH9280 - G1: Green Circuit Type Package Z4: TO-94 Package Temperature Range TO-94 -40 to 125°C Part Number AH9280Z4-G1 Marking ID 9280Z4-G1 Packing Type Bulk BCD Semiconductor's Pb-free products, as designated with "G1" suffix in the part number, are RoHS compliant and green. Mar. 2010 Rev. 1. 0 BCD Semiconductor Manufacturing Limited 3 Preliminary Datasheet Two Phase Dual-coil High Voltage Smart Fan Motor Driver AH9280 Absolute Maximum Ratings (Note 1, TA=25°C) Parameter Symbol Value Unit VCC 28 V Peak Output Current IOUT_P 1200 mA Continuous Output Current IOUT_C 600 mA Supply Current (Fault) ICC 6 mA Power Dissipation PD 600 mW Thermal Resistance (Junction to Ambient) θJA 208 °C/W Storage Temperature TSTG -55 to 150 °C ESD (Human Body Model) ESD 6000 V ESD (Machine Model) ESD 400 V Supply Voltage Note 1: Stresses greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “Recommended Operating Conditions” is not implied. Exposure to “Absolute Maximum Ratings” for extended periods may affect device reliability. Recommended Operating Conditions Parameter Symbol Min Max Unit Supply Voltage VCC 2.5 24 (Note 2) V Ambient Temperature TA -40 125 °C Note 2: It is recommended to add a 680Ω resistor at VCC if the supply voltage is 24V. Mar. 2010 Rev. 1. 0 BCD Semiconductor Manufacturing Limited 4 Preliminary Datasheet Two Phase Dual-coil High Voltage Smart Fan Motor Driver AH9280 Electrical Characteristics VCC =12V, TA =25°C, unless otherwise specified. Parameter Symbol Conditions Supply Voltage VCC Operating Supply Current ICC Average Output Current IOUT Output Leakage Current Min 2.5 Typ mA 500 mA 0.1 10 µA 600 1000 mV 12 V Saturation Voltage VSAT Output On Time TON 0.8 s Output Off Time TOFF 5 s VZ 35 V Output Zener Break-down Voltage IOUT=350mA Unit 24 (Note 2) 6 4 ILEAKAGE Max Magnetic Characteristics VCC =12V, TA =25°C, unless otherwise specified. Parameter Symbol Operating Point BOP Releasing Point BRP Hysteresis BHYS Min -50 Typ Max Unit 20 50 Gauss -20 Gauss 40 Gauss VDO (V) High Off-state BHYS Turn On Turn Off VSAT N Low On-state BRP 0 S BOP Figure 4. Magnetic Flux Density (Gauss) Mar. 2010 Rev. 1. 0 BCD Semiconductor Manufacturing Limited 5 Preliminary Datasheet Two Phase Dual-coil High Voltage Smart Fan Motor Driver AH9280 Test Circuit S Marking Side N Figure 5. Basic Test Circuit of AH9280 VCC VDO (V) VDOB (V) 12 12 10 10 8 8 6 6 4 4 2 2 VSAT VSAT 0 -40 -20 0 0 20 40 -40 Magnetic Flux Density B (Gauss) -20 0 20 40 Magnetic Flux Density B(Gauss) Figure 6. VDO vs. Magnetic Flux Density Mar. 2010 VCC Figure 7. VDOB vs. Magnetic Flux Density Rev. 1. 0 BCD Semiconductor Manufacturing Limited 6 Preliminary Datasheet Two Phase Dual-coil High Voltage Smart Fan Motor Driver AH9280 Typical Performance Characteristics 6.0 6.0 5.5 5.5 5.0 Supply Current (mA) Supply Current (mA) 5.0 4.5 4.0 3.5 3.0 2.5 4.5 4.0 3.5 3.0 2.5 2.0 1.5 2.0 1.0 1.5 o TA=25 C 4 8 12 16 20 VCC=12V 0.5 1.0 0.0 -40 24 -20 0 Supply Voltage (V) 20 40 60 80 100 120 o Ambient Temperature ( C) Figure 8. Supply Current vs. Supply Voltage Figure 9. Supply Current vs. Ambient Temperature 100 1000 o TA=25 C 50 VCC=12V IOUT=150mA BRP Saturation Voltage (mV) BOP/BRP/BHYS (Gauss) 900 BOP 75 BHYS 25 0 -25 800 IOUT=350mA 700 600 500 400 300 -50 200 -75 4 8 12 16 20 100 -40 24 0 20 40 60 80 100 120 Ambient Temperature ( C) Figure 10. BOP/BRP/BHYS vs. Supply Voltage Mar. 2010 -20 o Supply Voltage (V) Figure 11. Saturation Voltage vs. Ambient Temperature Rev. 1. 0 BCD Semiconductor Manufacturing Limited 7 Preliminary Datasheet Two Phase Dual-coil High Voltage Smart Fan Motor Driver AH9280 1200 600 1000 500 Power Dissipation (mV) Saturation Voltage (mV) Typical Performance Characteristics (Continued) 800 600 400 400 300 200 o TA=25 C 200 100 VCC=12V 0 0 100 200 300 400 500 0 600 -25 Output Current (mA) 0 25 50 75 100 125 150 o Ambient Temperature ( C) Figure 12. Saturation Voltage vs. Output Current Figure 13. Power Dissipation vs. Ambient Temperature 50 40 BOP/BRP/BHYS (Gauss) 30 20 10 0 -10 VCC=12V BOP BRP BHYS -20 -30 -40 -50 -40 -20 0 20 40 60 80 100 120 o Ambient Temperature ( C) Figure 14. BOP/BRP/BHYS vs. Ambient Temperature Mar. 2010 Rev. 1. 0 BCD Semiconductor Manufacturing Limited 8 Preliminary Datasheet Two Phase Dual-coil High Voltage Smart Fan Motor Driver AH9280 Typical Application Figure 15. Typical Application of AH9280 (For 5V and 12V Brushless DC Fan, Note 3) Figure 16. Typical Application of AH9280 (For 24V Brushless DC Fan, Note 3) Note 3: 1. Typical 2.2µF electrolytic capacitors are recommended for C1, C2 and C3. 2. Typical 680Ω resistor is recommended for R1. 3. D1 is an ordinary diode used to block the reverse current from coil side. 4. D1, C1, C2, C3 (marked in dash rectangle) can be cancelled according to system requirement. Mar. 2010 Rev. 1. 0 BCD Semiconductor Manufacturing Limited 9 Preliminary Datasheet Two Phase Dual-coil High Voltage Smart Fan Motor Driver AH9280 Mechanical Dimensions TO-94 0.500(0.020) 0.700(0.028) 3.780(0.149) Unit: mm(inch) 45 °TYP 4.080(0.161) 1.520(0.059) 1.720(0.067) 0.700(0.028) 0.900(0.035) 4.980(0.196) 5.280(0.208) 0.360(0.014) 0.510(0.020) 2.000(0.079) 2.300(0.091) 1.100(0.043) 1.400(0.055) Package Sensor Location 0.380(0.015) 0.550(0.022) 3.450(0.136) 3.750(0.148) (For Hall IC) 0.360(0.014) 0.500(0.020) 14.000(0.550) 15.300(0.602) 1.270(0.050) TYP 3.710(0.146) 3.910(0.154) Mar. 2010 Rev. 1. 0 BCD Semiconductor Manufacturing Limited 10 BCD Semiconductor Manufacturing Limited http://www.bcdsemi.com IMPORTANT NOTICE IMPORTANT NOTICE BCD Semiconductor BCD Semiconductor Manufacturing Manufacturing Limited Limited reserves reserves the the right right to to make make changes changes without without further further notice notice to to any any products products or or specifispecifications herein. cations herein. BCD BCD Semiconductor Semiconductor Manufacturing Manufacturing Limited Limited does does not not assume assume any any responsibility responsibility for for use use of of any any its its products products for for any any particular purpose, particular purpose, nor nor does does BCD BCD Semiconductor Semiconductor Manufacturing Manufacturing Limited Limited assume assume any any liability liability arising arising out out of of the the application application or or use use of any of any its its products products or or circuits. circuits. BCD BCD Semiconductor Semiconductor Manufacturing Manufacturing Limited Limited does does not not convey convey any any license license under under its its patent patent rights rights or or other rights other rights nor nor the the rights rights of of others. others. MAIN SITE SITE MAIN - Headquarters BCD Semiconductor Manufacturing Limited BCD Semiconductor Manufacturing Limited - Wafer Fab No. 1600, Zi Xing Road, Shanghai ZiZhu Science-basedLimited Industrial Park, 200241, China Shanghai SIM-BCD Semiconductor Manufacturing Tel: Fax: +86-21-24162277 800,+86-21-24162266, Yi Shan Road, Shanghai 200233, China Tel: +86-21-6485 1491, Fax: +86-21-5450 0008 REGIONAL SALES OFFICE Shenzhen OfficeSALES OFFICE REGIONAL - Wafer FabSemiconductor Manufacturing Limited BCD Shanghai SIM-BCD Semiconductor Manufacturing Co., Ltd. - IC Design Group 800 Yi Shan Road, Shanghai 200233, China Corporation Advanced Analog Circuits (Shanghai) Tel: +86-21-6485 1491,YiFax: 0008200233, China 8F, Zone B, 900, Shan+86-21-5450 Road, Shanghai Tel: +86-21-6495 9539, Fax: +86-21-6485 9673 Taiwan Office Shanghai Semiconductor Manufacturing Co., Ltd., Shenzhen Office BCD Taiwan Semiconductor Shenzhen SIM-BCD Office Office (Taiwan) Company Limited Unit A Room 1203, Skyworth Bldg., Gaoxin Ave.1.S., Nanshan Shenzhen, 4F, 298-1, Guang Road,(Taiwan) Nei-Hu District, Taipei, Shanghai SIM-BCD Semiconductor Manufacturing Co., Ltd.District, Shenzhen Office BCDRui Semiconductor Company Limited China Taiwan Advanced Analog Circuits (Shanghai) Corporation Shenzhen Office 4F, 298-1, Rui Guang Road, Nei-Hu District, Taipei, Tel: +86-755-8826 Tel: +886-2-2656 2808 Room E, 5F, Noble 7951 Center, No.1006, 3rd Fuzhong Road, Futian District, Shenzhen 518026, China Taiwan Fax: +86-755-88267951 7865 Fax: +886-2-2656 28062808 Tel: +86-755-8826 Tel: +886-2-2656 Fax: +86-755-8826 7865 Fax: +886-2-2656 2806 USA Office BCD Office Semiconductor Corp. USA 30920Semiconductor Huntwood Ave.Corporation Hayward, BCD CA 94544, USA Ave. Hayward, 30920 Huntwood Tel :94544, +1-510-324-2988 CA U.S.A Fax:: +1-510-324-2988 +1-510-324-2788 Tel Fax: +1-510-324-2788