CC2564-PAN1326 www.ti.com SWRS124 – JULY 2012 Dual Mode Bluetooth® Smart Ready FEATURES APPLICATIONS • • • • • • • 1 23 • • • • • • • • • • • • Best-In-Class Bluetooth RF Performance (Tx Power, Rx Sensitivity, Blocking) TX: +10 dBm, Rx: –93 dbM Fully Qualified Bluetooth v4.0 + Enhanced Data Rate (EDR) Dimensions PAN1326: 9 mm x 9.5 mm x 1.8 mm (Width x Length x Height) Dimensions PAN1316: 6.5 mm x 9.5 mm x 1.8 mm (Width x Length x Height) Certification: FCC, IC, CE Operating Temperature Range: -20°C to 70°C Supply Voltage Range: 1.7 V – 4.8 V Profiles: – Serial Port Profile (SPP) – Generic Attribute Profile (GATT) – Alert Notification Profile (ANP) – Alert Notification Service (ANS) – Device Information Service (DIS) – Health Thermometer Profile (HTP) – Health Thermometer Service (HTS) – Heart Rate Profile (HRP) – Heart Rate Service (HRS) Integrates With TI’s Ultra Low-Power MSP430™ Microprocessor Fast Algorithm for Both ACL and eSCO Supports Extended Range Tx Power With 10 dBm Typical Output Low Power Scan Method for Page and Inquiry Scans at 1/3rd Normal Power Sport and Fitness Watches Mobile Accessories Entertainment Devices Toys All Bluetooth Wireless Application DESCRIPTION The following product brief applies to Panasonic’s Bluetooth module, series number: PAN1326 and PAN1316. The Bluetooth chip used is based on the CC2564 from Texas Instruments. The CC2564-PAN1326 and PAN1316 enables Bluetooth Low Energy and Bluetooth connectivity in a broad spectrum of devices. This device aims to lower the consumption of power while establishing fast connection for the transfer for small amount of data. While in sleep mode, less than 135 µA of power is consumed and the overall power consumption is around 40 mA. CC2564-PAN1326 and PAN1316 device maintains best-in-class Bluetooth RF performance. Similar to CC2567-PAN1327 and PAN1317 which enables a dual mode for ANT and Bluetooth, this device is supported to run a dual mode for Bluetooth and Bluetooth Smart (Low Energy). For evaluations use the PAN1323EMK, MSP-EXP4305438 Experimenter Board, and MSP-FET430UIF (each sold separately). Disclaimer: All content in and linked to this product brief is provided by TI "AS IS" without express or implied warranties of any kind, and it may contain errors, omissions and technical inaccuracies. TI does not endorse or warrant any of the third party products or services referenced on this product brief. This information is provided subject to TI’s Terms of Use. Be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. 1 2 3 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. MSP430 is a trademark of Texas Instruments. Dual Mode Bluetooth is a registered trademark of Bluetooth SIG, Inc. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 2012, Texas Instruments Incorporated IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46C and to discontinue any product or service per JESD48B. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such components to meet such requirements. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2012, Texas Instruments Incorporated