Click on Series name for product info on aimtec.com Series AM4TW-Z 4 Watt | DC-DC Converter FEATURES: RoHS compliant 24 Pin DIP Package High efficiency up to 83% Wide 4:1 input range Operating temperature -40oC to + 85oC Input / Output Isolation 1500 or 3500VDC Pin compatible with multiple manufacturers Continuous short circuit protection Models Single output Model Input Voltage (V) Output Voltage (V) Output Current max (mA) Isolation (VDC) Max Capacitive Load (uF) Efficiency (%) AM4TW-2403SZ AM4TW-2405SZ AM4TW-2407SZ AM4TW-2409SZ AM4TW-2412SZ AM4TW-2415SZ AM4TW-2418SZ AM4TW-2424SZ AM4TW-4803SZ AM4TW-4805SZ AM4TW-4807SZ AM4TW-4809SZ AM4TW-4812SZ AM4TW-4815SZ AM4TW-4818SZ AM4TW-4824SZ 9-36 9-36 9-36 9-36 9-36 9-36 9-36 9-36 18-72 18-72 18-72 18-72 18-72 18-72 18-72 18-72 3.3 5 7.2 9 12 15 18 24 3.3 5 7.2 9 12 15 18 24 1200 800 550 440 330 265 220 165 1200 800 550 440 330 265 220 165 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1000 680 100 100 100 100 100 100 1000 680 100 100 100 100 100 100 77 80 80 80 83 83 80 81 77 80 78 82 81 81 81 82 AM4TW-2403SH35Z AM4TW-2405SH35Z AM4TW-2407SH35Z AM4TW-2409SH35Z AM4TW-2412SH35Z AM4TW-2415SH35Z AM4TW-2418SH35Z AM4TW-2424SH35Z AM4TW-4803SH35Z AM4TW-4805SH35Z AM4TW-4807SH35Z AM4TW-4809SH35Z AM4TW-4812SH35Z AM4TW-4815SH35Z AM4TW-4818SH35Z AM4TW-4824SH35Z 9-36 9-36 9-36 9-36 9-36 9-36 9-36 9-36 18-72 18-72 18-72 18-72 18-72 18-72 18-72 18-72 3.3 5 7.2 9 12 15 18 24 3.3 5 7.2 9 12 15 18 24 1200 800 550 440 330 265 220 165 1200 800 550 440 330 265 220 165 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 1000 680 100 100 100 100 100 100 1000 680 100 100 100 100 100 100 77 80 80 82 83 83 80 81 77 80 80 82 81 81 81 82 Isolation (VDC) Max Capacitive Load (uF) Efficiency (%) 1500 1500 1500 1500 1500 1500 1500 1500 ±470 ±330 ±47 ±47 ±47 ±22 ±10 ±10 76 78 80 80 82 80 80 80 Models Dual output Model AM4TW-2403DZ AM4TW-2405DZ AM4TW-2407DZ AM4TW-2409DZ AM4TW-2412DZ AM4TW-2415DZ AM4TW-2418DZ AM4TW-2424DZ www.aimtec.com F 051e R12.F Input Voltage (V) 9-36 9-36 9-36 9-36 9-36 9-36 9-36 9-36 Output Voltage (V) Output Current max (mA) ±3.3 ±5 ±7.2 ±9 ±12 ±15 ±18 ±24 ±600 ±400 ±275 ±220 ±165 ±125 ±100 ±84 Tel: +1 514 620 2722 1 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM4TW-Z 4 Watt | DC-DC Converter Models Dual output (continued) Model Input Voltage (V) Output Voltage (V) Output Current max (mA) Isolation (VDC) Max Capacitive Load (uF) Efficiency (%) AM4TW-4803DZ AM4TW-4805DZ AM4TW-4807DZ AM4TW-4809DZ AM4TW-4812DZ AM4TW-4815DZ AM4TW-4818DZ AM4TW-4824DZ 18-72 18-72 18-72 18-72 18-72 18-72 18-72 18-72 ±3.3 ±5 ±7.2 ±9 ±12 ±15 ±18 ±24 ±600 ±400 ±275 ±220 ±165 ±125 ±100 ±84 1500 1500 1500 1500 1500 1500 1500 1500 ±470 ±330 ±47 ±47 ±47 ±22 ±10 ±10 75 79 80 81 82 81 80 80 AM4TW-2403DH35Z AM4TW-2405DH35Z AM4TW-2407DH35Z AM4TW-2409DH35Z AM4TW-2412DH35Z AM4TW-2415DH35Z AM4TW-2418DH35Z AM4TW-2424DH35Z AM4TW-4803DH35Z AM4TW-4805DH35Z AM4TW-4807DH35Z AM4TW-4809DH35Z AM4TW-4812DH35Z AM4TW-4815DH35Z AM4TW-4818DH35Z AM4TW-4824DH35Z 9-36 9-36 9-36 9-36 9-36 9-36 9-36 9-36 18-72 18-72 18-72 18-72 18-72 18-72 18-72 18-72 ±3.3 ±5 ±7.2 ±9 ±12 ±15 ±18 ±24 ±3.3 ±5 ±7.2 ±9 ±12 ±15 ±18 ±24 ±600 ±400 ±275 ±220 ±165 ±125 ±100 ±84 ±600 ±400 ±275 ±220 ±165 ±125 ±100 ±84 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 ±470 ±330 ±47 ±47 ±47 ±22 ±10 ±10 ±470 ±330 ±47 ±47 ±47 ±22 ±10 ±10 76 78 80 80 82 80 80 80 75 79 80 81 82 81 80 80 Input Specifications Parameters Voltage range Nominal Typical 24 48 9-36 18-72 24 Vin 48 Vin Peak input voltage time Units VDC (Pi) Network 350 Filter Turn on transient process time Start up time Absolute maximum rating Maximum ms ms 500 -0.7 - 40 -0.7 - 80 100 VDC ms Isolation Specifications Parameters Tested I/O voltage Resistance Capacitance Conditions Typical 3 sec Rated Units 1500 or 3500 VDC MOhm pF Maximum Units > 1000 470 Output Specifications Parameters Voltage accuracy Voltage balance Short Circuit protection Short circuit restart Line voltage regulation (Single) Line voltage regulation (Dual) Load voltage regulation (Single) Load voltage regulation (Single) 3.3V output models www.aimtec.com F 051e R12.F Conditions Typical ±1 ±1 % % Continuous Auto-recovery ±0.5 ±0.5 ±0.5 % % % ±1.5 % Tel: +1 514 620 2722 2 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM4TW-Z 4 Watt | DC-DC Converter Output Specifications (continued) Parameters Conditions Load voltage regulation (Dual) Load voltage regulation (Dual) ±3.3V output model Temperature coefficient Typical Units % ±1.5 % ±0.02 %/oC 60 mV p-p 10 ms At 20 MHz Bandwidth Ripple & Noise Maximum ±0.5 Rising time General Specifications Parameters Switching frequency Operating temperature Storage temperature Max Case temperature Cooling Humidity Case material Weight Dimensions(L x W x H) MTBF Conditions Typical 100% load Without derating 260 Maximum Units 100 KHz oC oC oC -40 to +85 -40 to +125 Free air convection 90 % Nickel-coated copper 26 g Tolerance ±0.5 mm or ±0.02 inches 1.28 x 0.84 x 0.41 inches 32.25 x 21.35 x 10.50 mm >960 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25oC) NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified Safety Specifications Parameters Agency Approval CE EN55022 Class A, EN55024 IEC61000-4-2, Perf. Criteria B IEC61000-4-3, Perf. Criteria A IEC61000-4-4, Perf. Criteria B (external 220uF/100V cap required) IEC61000-4-5, Perf. Criteria B (external 220uF/100V cap required) IEC61000-4-6, Perf. Criteria A IEC61000-4-8, Perf. Criteria A NOTE: Also designed to meet IEC60950-1:2001 Standards Pin Out Specifications Pin 1 2 3 9 10 11 12/13 14 15 16 22 23 24 1500VDC Single Dual +V Input N.C. N.C. No Pin -V Output +V Output -V Input +V Output -V Output No Pin N.C. N.C. +V Input www.aimtec.com F 051e R12.F +V Input -V Output Common No Pin Common +V Output -V Input +V Output Common No Pin Common -V Output +V Input 3500VDC Single Dual No Pin -V Input -V Input No Pin No Pin N.C. No Pin +V Output No Pin -V Output +V Input +V Input No Pin No Pin -V Input -V Input Common No Pin -V Output No Pin +V Output No Pin Common +V Input +V Input No Pin Tel: +1 514 620 2722 3 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM4TW-Z 4 Watt | DC-DC Converter Dimensions 0.25 (0.01) 20.32 (0.80) 31.75 (1.25) 1 2 3 9 10 11 12 Bottom View 24 23 22 15.24 (0.60) 27.94 (1.10) 0.50 (0.02) 16 15 14 13 2.54 (0.10) Built-in Stand-offs to ease PCB cleaning 10.16 (0.40) Printed Face 3.05 (0.12) All dimensions are typical: millimeters (inches) Pin Diameter: 0.50 ± 0.05 (0.02 ± 0.002) Pin Pitch Tolerance: ± 0.35 (±0.014) Case Tolerence: ± 0.5 (±0.02) Conducted Emissions: Dual Output 12uH L +V output +V input C1 DC/DC Converter 220uF 100V Load -V output -V input Load Common C2 1000pF 2KV www.aimtec.com F 051e R12.F Tel: +1 514 620 2722 4 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM4TW-Z 4 Watt | DC-DC Converter Surge: Dual Output +V output +V input Load DC/DC Converter C1 -V output 220uF 100V Load -V input Common NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R12.F Tel: +1 514 620 2722 5 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only