February 28, 2007 SMD INDUCTOR DR354-3 SERIES Features z SMD Chip Inductor, Low Profile z Suitable for High Frequency Application z Inductance Range from 10nH to 10µH z Operating Temp. -40°C to +125°C z Tinned Leads with Leaded Solder is Available (note 4) ELECTRICAL SPECIFICATIONS AT 25ºC PART NO. TOLERANCE, T DR354-3-103-T DR354-3-123-T DR354-3-153-T DR354-3-183-T DR354-3-223-T DR354-3-273-T DR354-3-333-T DR354-3-393-T DR354-3-473-T DR354-3-563-T DR354-3-683-T DR354-3-823-T DR354-3-104-T DR354-3-124-T DR354-3-154-T DR354-3-184-T DR354-3-224-T DR354-3-274-T DR354-3-334-T DR354-3-394-T DR354-3-474-T DR354-3-564-T DR354-3-624-T DR354-3-684-T DR354-3-754-T DR354-3-824-T DR354-3-914-T DR354-3-105-T DR354-3-125-T DR354-3-155-T DR354-3-185-T DR354-3-225-T DR354-3-275-T DR354-3-335-T DR354-3-395-T DR354-3-475-T DR354-3-565-T DR354-3-685-T DR354-3-825-T DR354-3-106-T M, K, J M, K, J M, K M, K, J M, K, J M, K K, J K, J K, J K, J K, J K, J K, J K, J K, J K, J K, J K, J K, J K, J K, J K, J K, J K, J M, K, J M, K, J M, K, J M, K, J M, K, J M, K, J M, K, J M, K, J M, K, J M, K, J M, K, J M, K, J M, K, J M, K, J M, K, J M, K, J INDUCTANCE (nH) @ 0A 10 @50MHz 12 @50MHz 15 @50MHz 18 @50MHz 22 @50MHz 27 @50MHz 33 @50MHz 39 @50MHz 47 @50MHz 56 @50MHz 68 @50MHz 82 @50MHz 100 @25MHz 120 @25MHz 150 @25MHz 180 @25MHz 220 @25MHz 270 @25MHz 330 @25MHz 390 @25MHz 470 @25MHz 560 @25MHz 620 @25MHz 680 @25MHz 750 @25MHz 820 @25MHz 910 @25MHz 1000 @25MHz 1200 @7.9MHz 1500 @7.9MHz 1800 @7.9MHz 2200 @7.9MHz 2700 @7.9MHz 3300 @7.9MHz 3900 @7.9MHz 4700 @7.9MHz 5600 @7.9MHz 6800 @7.9MHz 8200 @7.9MHz 10000 @7.9MHz DCR (Ω) MAX. 0.08 0.09 0.10 0.11 0.12 0.13 0.14 0.15 0.16 0.18 0.20 0.22 0.56 0.63 0.70 0.77 0.84 0.91 1.05 1.12 1.19 1.33 1.40 1.47 1.54 1.61 1.68 1.75 2.00 2.30 2.60 2.80 3.20 3.40 3.60 4.00 6.80 7.50 8.20 9.10 MAX. RATED CURRENT (A) 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 0.650 0.650 0.580 0.620 0.500 0.500 0.450 0.470 0.470 0.400 0.300 0.400 0.360 0.400 0.380 0.370 0.310 0.330 0.300 0.280 0.290 0.290 0.260 0.260 0.190 0.180 0.170 0.160 INDUCTANCE TOLERANCE: WHEN ORDERING PLEASE SPECIFY THE TOLERANCE. T (M=±20%, K=±10%, J=±5%) DATATRONIC: 28151 Highway 74, Romoland, CA 92585 Tel: 951-928-7700 Toll Free Tel: 888-889-5391 Fax: 951-928-7701 Email: [email protected] 499 King’s Road, Hong KongTel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290 All specifications are subject to change without notice. February 28, 2007 MECHANICAL OUTLINES Q VS FREQUENCY RESPONSE Ls VS FREQUENCY RESPONSE Notes: 1. All dimensions are shown in millimeter “mm” 2. General tolerance ±0.1mm, unless other specified 3. Tape and reel quantity, 1000 pcs/reel 4. For non-RoHS parts replace DR prefix with 42- (e.g. DR354-3 becomes 42-354-3) 5. Terminal finish is compliant to RoHS requirements. Solder in accordance with J-STD-020C DATATRONIC: 28151 Highway 74, Romoland, CA 92585 Tel: 951-928-7700 Toll Free Tel: 888-889-5391 Fax: 951-928-7701 Email: [email protected] 499 King’s Road, Hong KongTel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290 All specifications are subject to change without notice.