BELLING BL9180ABCRA Dual,300ma ultra-low noise cmos ldo regulator Datasheet

BL9180
Dual,300mA Ultra-low Noise
CMOS LDO Regulator
FEATURES
DESCRIPTION

Up to 300mA Output Current(Each LDO)
The BL9180 dual, low noise, low-dropout regulator

Dual Shutdown Pins Control Each Output

90uA Operating supply current per LDO

Excellent Line regulation:0.05%/V
independently by trimming. Voltages are selectable

Low Dropout:[email protected]
in 50mV steps within a range of 1.2V to 3.3V by

High Power Supply Rejection Ratio
operating from a 2V to 6V input. The BL9180

Wide Operating Voltage Range:2.0V to 6.0V
includes two independent logic-controlled shutdown

1.2V to 3.3V Factory-Preset Output
inputs and allows the output of each regulator to be

High Accuracy: ±1% or ±2%
turned off independently. When both outputs

Internal Pulled down(8 MΩ)resistor
shutdown simultaneously, the chip will be turn off

Current Limiting and Thermal Protection
and consumes nearly zero operation current which

Two LDOs in SOT-23-6 and ESOP-8 Package
is suitable for battery-power devices.

RoHS Compliant and 100% Lead(Pb)-Free
The
supplying up to 300mA output current at each
Step-Down
Converter
channel. The output voltage for each regulator is set
,
BL9180
includes
high
accuracy
voltage
reference, error amplifier, current limit circuit and
APPLICATIONS
output driver module.

Cellular and Smart Phones
The BL9180 has excellent load and line transient

Battery-Powered Equipment
response and good temperature characteristics,

Laptop, Palmtops, Notebook Computers
which can assure the stability of chip and power

Hand-Held Instruments
system.

PCMCIA Cards and Wireless LAN

MP3/MP4/MP5 Players
guarantee output voltage accuracy within ±1% or
±2%. The BL9180 is available in SOT-23-6 and

Portable Information Appliances
ESOP-8 package which is Lead(Pb)-free.
And
it
uses
trimming
ORDERING INFORMATION
TYPICAL APPLICATION
BL9180 X X X XX
BL9180 XXX RB
PPMIC BU
BL9180 Rev 2.2
8/2013
Package:
RA:SOT-23-6A
RB:SOT-23-6B
EP:ESOP-8
Features:
P:Standard(default, lead free)
C:Customized
Output Voltage Accuracy
A:±1%
B:±2%
Output Voltage
A: 1.3V(Output1),2.8V(Output2)
B: 1.5V(Output1),3.0V(Output2)
C: 1.8V(Output1),2.5V(Output2)
D: 1.8V(Output1),2.8V(Output2)
E: 2.5V(Output1),1.8V(Output2)
F: 2.8V(Output1),1.8V(Output2)
G: 2.8V(Output1),3.0V(Output2)
H: 2.8V(Output1),3.3V(Output2)
I: 3.0V(Output1),1.5V(Output2)
J: 3.3V(Output1),2.8V(Output2)
K: 3.3V(Output1),3.3V(Output2)
L:2.8V(Output1),1.2V(Output2)
M:1.8V(Output1),3.3V(Output2)
N:1.5V(Output1),3.3V(Output2)
O: 1.2V(Output1),3.3V(Output2)
P: 1.2V(Output1),1.8V(Output2)
1
2
VIN
3
EN1
VOUT1
VDD
GND
EN2
VOUT2
1uF
technique
6
5
4
to
VOUT1
1uF
VOUT2
BL9180
1uF
Application hints:
Output capacitor (COUT≥2.2uF) is recommended
in BL9180 applications to assure the circuit’s
stability for output voltage ≤ 1.8V.
www.belling.com.cn
Belling Proprietary Information. Unauthorized Photocopy and Duplication Prohibited
© 2010 Belling All Rights Reserved
1
BL9180
Dual,300mA Ultra-low Noise
CMOS LDO Regulator
Absolute Maximum Rating
Input Supply Voltage (VIN)
EN Input Voltage
Output Voltage
Output Current
(Note 1)
-0.3V to +7V
-0.3V to +VIN
-0.3V to VIN+0.3V
400mA
Maximum Junction Temperature
125°C
(Note2)
Operating Temperature Range
-40°C to 85°C
Storage Temperature Range
-65°C to 125°C
Lead
Temperature
(Soldering,
10s)
300°C
Step-Down Converter
,
Package Information
SOT-23-6A
TOP VIEW
2
VOUT2
3
EN1
5
GND
4
EN1 1
VDD
EN2
EN2
Part Number
3
VOUT1
5
GND
4
VOUT2
Top Mark
VOUT1
1
VIN1
2
VOUT2
3
VIN2
4
8
EN1
7
GND
6
GND
5
EN2
Temp Range
(Note3)
BL9180-XXXRA
EVYW
BL9180-XXXRB
EVYW
-40°C to +85°C
BL9180-XXXEP
BL9180
(Note3)
VYWEP
-40°C to +85°C
Name
Function
VOUT1
LDO1 Output Pin
VDD
Input Pin
VOUT2
LDO2 Output Pin
EN2
LDO2 Enable Pin
GND
Ground Pin
EN1
LDO1 Enable Pin1
VIN1
Input Pin1
VIN2
Input Pin2
ӨJA
250C/W
50C/W
Package
SOT23-6
ESOP-8
9
2009
A
2010
B
2011
C
2012
D
2013
1
A
…
…
25
Y
26
Z
27
a
W
Week
-40°C to +85°C
Thermal Resistance (Note 4):
Pin Description
Y
Year
2
6
MARKING
VDD
6
ESOP-8
TOP VIEW
MARKING
1
MARKING
VOUT1
SOT-23-6B
TOP VIEW
…
…
51
y
ӨJC
130°C/W
10C/W
52
z
Product Classification
Output
Voltage
1.3V/2.8V
1.5V/3.0V
1.8V/2.5V
1.8V/2.8V
2.5V/1.8V
Voltage
Code
A
B
C
D
E
PPMIC BU
BL9180 Rev 2.2
8/2013
Accuracy
±2%
±2%
±2%
±2%
±2%
Package
Type
SOT-23-6A
SOT-23-6A
SOT-23-6A
SOT-23-6A
SOT-23-6A
Product
Name
BL9180-ABPRA
BL9180-BBPRA
BL9180-CBPRA
BL9180-DBPRA
BL9180-EBPRA
Package
Type
SOT-23-6B
SOT-23-6B
SOT-23-6B
SOT-23-6B
SOT-23-6B
Product
Name
BL9180-ABPRB
BL9180-BBPRB
BL9180-CBPRB
BL9180-DBPRB
BL9180-EBPRB
Package
Type
ESOP-8
ESOP-8
ESOP-8
ESOP-8
ESOP-8
www.belling.com.cn
Belling Proprietary Information. Unauthorized Photocopy and Duplication Prohibited
© 2010 Belling All Rights Reserved
Product
Name
BL9180-ABPEP
BL9180-BBPEP
BL9180-CBPEP
BL9180-DBPEP
BL9180-EBPEP
2
BL9180
Dual,300mA Ultra-low Noise
CMOS LDO Regulator
2.8V/1.8V
2.8V/3.0V
2.8V/3.3V
3.0V/1.5V
3.3V/2.8V
3.3V/3.3V
2.8V/1.2V
1.8V/3.3V
1.5V/3.3V
1.2V/3.3V
1.2V/1.8V
F
G
H
I
J
K
L
M
N
O
P
±2%
±2%
±2%
±2%
±2%
±2%
±2%
±2%
±2%
±2%
±2%
SOT-23-6A
SOT-23-6A
SOT-23-6A
SOT-23-6A
SOT-23-6A
SOT-23-6A
SOT-23-6A
SOT-23-6A
SOT-23-6A
SOT-23-6A
SOT-23-6A
BL9180-FBPRA
BL9180-GBPRA
BL9180-HBPRA
BL9180-IBPRA
BL9180-JBPRA
BL9180-KBPRA
BL9180-LBPRA
BL9180-MBPRA
BL9180-NBPRA
BL9180-OBPRA
BL9180-PBPRA
SOT-23-6B
SOT-23-6B
SOT-23-6B
SOT-23-6B
SOT-23-6B
SOT-23-6B
SOT-23-6B
SOT-23-6B
SOT-23-6B
SOT-23-6B
SOT-23-6B
BL9180-FBPRB
BL9180-GBPRB
BL9180-HBPRB
BL9180-IBPRB
BL9180-JBPRB
BL9180-KBPRB
BL9180-LBPRB
BL9180-MBPRB
BL9180-NBPRB
BL9180-OBPRB
BL9180-PBPRB
Step-Down Converter
ESOP-8
ESOP-8
ESOP-8
ESOP-8
ESOP-8
ESOP-8
ESOP-8
ESOP-8
ESOP-8
ESOP-8
ESOP-8
BL9180-FBPEP
BL9180-GBPEP
BL9180-HBPEP
BL9180-IBPEP
BL9180-JBPEP
BL9180-KBPEP
BL9180-LBPEP
BL9180-MBPEP
BL9180-NBPEP
BL9180-OBPEP
BL9180-PBPEP
,
Note 1: Absolute Maximum Ratings are those values beyond which the life of a device may be impaired.
Note 2: The BL9180 is guaranteed to meet performance specifications from 0°C to 70°C. Specifications over the –40°C to
85°C operating temperature range are assured by design, characterization and correlation with statistical
process controls.
Note 3: E: BL9180 with RA package E: BL9180 with RB package V: Voltage code Y: Year of wafer manufacturing W:
Week of wafer manufacturing EP: ESOP-8
Note 4: Thermal Resistance is specified with approximately 1 square of 1 oz copper.
Block Diagram
SOT23-6
PPMIC BU
BL9180 Rev 2.2
8/2013
ESOP-8
www.belling.com.cn
Belling Proprietary Information. Unauthorized Photocopy and Duplication Prohibited
© 2010 Belling All Rights Reserved
3
BL9180
Dual,300mA Ultra-low Noise
CMOS LDO Regulator
Electrical Characteristics (Note 5)
(VIN=3.6V, EN1=EN2=VIN, CIN=COUT=1F, TA=25°C, unless otherwise noted.)
Parameter
Symbol
Conditions
MIN
TYP
Step-Down Converter
Input Voltage
VIN
2
Output Voltage Accuracy
-1
VIN=3.6V,
VOUT
(Note 6)
IOUT=1mA
-2
Current Limit
ILIM
400
430
RLOAD=1
Quiescent Current
IQ
VEN>1.2V, IOUT=0mA
180
IOUT=200mA,
130
VOUT=2.8V
Dropout Voltage
VDROP
IOUT=300mA,
210
VOUT=2.8V
VIN=3.6V to 5.5V
(Note 7)
ΔVLINE
0.05
Line Regulation
IOUT=1mA
(Note 8)
ΔVLOAD
1mA<IOUT<300mA
Load Regulation
(Note 9)
Output Voltage
TCVOUT
IOUT=1mA
±60
Temperature Coefficient
Standby Current
ISTBY
VEN=GND,Shutdown
0.01
EN Input Bias Current
IIBSD
VEN=GND or VIN
0
VIN=3V to 5.5V,
Logic Low
VIL
EN
Shutdown
Input
VIN=3V to 5.5V,
Threshold
Logic High
VIH
1.2
Start up
10Hz to100KHz,
Output Noise
eNO
IOUT=200mA
100
Voltage
COUT=1uF
Power
f=217Hz
-73
Supply
f=1KHz
PSRR
IOUT=100mA
-70
Rejection
f=10KHz
-50
Ratio
Thermal Shutdown
Shutdown, Temp
TSD
165
Temperature
increasing
Thermal Shutdown
TSDHY
30
Hysteresis
MAX
6
+1
+2
unit
V
%
,
mA
A
260
180
mV
300
0.17
%/V
2
%/A
ppm/°C
1
100
A
nA
0.4
V
V
VRMS
dB
°C
°C
Note 5: 100% production test at +25°C. Specifications over the temperature range are guaranteed by design and
characterization.
Note 6: This IC includes two kinds of output voltage accuracy versions. A: ±1%, B: ±2%.
 VOUT 1  VOUT 2
 V  V
OUT ( normal )
 IN
Note 7: Line regulation is calculated by V
LINE  

  100

Where VOUT1 is the output voltage when VIN=5.5V, and VOUT2 is the output voltage when VIN=3.6V,
△VIN=1.9V. VOUT(normal)=2.8V.
 VOUT 1  VOUT 2 
Note 8: Load regulation is calculated by V
  100
LOAD  
 I  V
 OUT OUT ( normal ) 
Where VOUT1 is the output voltage when IOUT=1mA, and VOUT2 is the output voltage when IOUT=300mA. △IOUT=0.299A,
VOUT(normal)=2.8V.
Note 9: The temperature coefficient is calculated by TC
VOUT 
PPMIC BU
BL9180 Rev 2.2
8/2013
VOUT
T  VOUT
www.belling.com.cn
Belling Proprietary Information. Unauthorized Photocopy and Duplication Prohibited
© 2010 Belling All Rights Reserved
4
BL9180
Dual,300mA Ultra-low Noise
CMOS LDO Regulator
Typical Performance Characteristics
Output Voltage Vs. Temperature
IQ Vs.VIN(BL9180-HBPRB)
Step-Down Converter
3.0
220
CIN=1uF
COUT1=1uF,COUT2=1uF
No Load
VIN=3.6V
CIN=COUT=1uF
215
Quiescent Current(uA)
Output Voltage(V)
2.9
2.8
2.7
2.6
,
210
205
200
2.5
-50
-25
0
25
50
75
100
195
3.50
125
3.75
4.00
4.25
4.50
4.75
5.00
5.25
5.50
Input Voltage(V)
Temperaute(C)
Dropout Voltage Vs. Load Current
PSRR(VOUT1)
300
0
CIN=COUT=1uF
CIN=COUT1=COUT2=1uF
VOUT1=2.8V VOUT2=3.0V
-10
VOUT=2.8V
-20
200
PSRR(dB)
Dropout Voltage(mV)
250
150
-30
-40
-50
100
TJ=85C
TJ=25C
TJ=-40C
50
-70
0
0
50
100
150
200
250
1mA Load
100mA Load
200mA Load
-60
-80
10
300
100
1000
Load Current(mA)
100000
1000000
VOUT Vs. VIN(BL9180-HBPRB)
EN Pin Shutdown Threshold Vs. Temperature
1.05
3.4
VIN=3.6V
1.00
3.2
CIN=COUT=1uF
3.0
2.8
0.95
Output Voltage(V)
EN Pin Shutdown Threshold(V)
10000
Frequency(Hz)
0.90
0.85
2.6
2.4
2.2
2.0
1.8
CIN=1uF
COUT1=COUT2=1uF
IOUT1=IOUT2=100mA
1.6
1.4
0.80
VOUT1(2.8V)
VOUT2(3.3V)
1.2
0.75
-50
-25
PPMIC BU
BL9180 Rev 2.2
8/2013
0
25
50
Temperature(C)
75
100
125
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
Input Voltage(V)
www.belling.com.cn
Belling Proprietary Information. Unauthorized Photocopy and Duplication Prohibited
© 2010 Belling All Rights Reserved
5
BL9180
Dual,300mA Ultra-low Noise
CMOS LDO Regulator
Step-Down Converter
,
PPMIC BU
BL9180 Rev 2.2
8/2013
www.belling.com.cn
Belling Proprietary Information. Unauthorized Photocopy and Duplication Prohibited
© 2010 Belling All Rights Reserved
6
BL9180
Dual,300mA Ultra-low Noise
CMOS LDO Regulator
Output Voltage(V)
VOUT Vs.VIN
3.0
2.9
2.8
2.7
2.6
2.5
2.4
2.3
2.2
2.1
2.0
1.9
1.8
1.7
1.6
1.5
1.4
1.3
1.2
1.1
1.0
1.0
CIN=COUT=1uF
Step-Down Converter
,
ILoad=1mA
ILoad=100mA
ILoad=300mA
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
Input Voltage(V)
PPMIC BU
BL9180 Rev 2.2
8/2013
www.belling.com.cn
Belling Proprietary Information. Unauthorized Photocopy and Duplication Prohibited
© 2010 Belling All Rights Reserved
7
BL9180
Dual,300mA Ultra-low Noise
CMOS LDO Regulator
Applications Information
protection.
The BL9180 is integrated with two low
noise, low dropout and low quiescent
Step-Down Converter
Operating Region and Power
current linear regulators designed primarily
,
Dissipation
for battery applications. Output voltages
are optional ranging from 1.2V to 3.3V, and
The maximum power dissipation of BL9180
each channel can supply current up to 300
depends on the thermal resistance of the
mA.
case and circuit board, the temperature
difference between the die junction and
Enable Function
ambient air, and the rate of airflow. The
power dissipation across the device is
The BL9180 is shutdown by pulling the EN
input low, and turn on by driving the input
high. If this feature is not be used, the EN
input should be tied to VIN to keep the
regulator on at all times.
The BL9180 includes two independent
current limit structure which monitor and
control each pass transistor’s gate voltage
limiting the guaranteed maximum output
current to 300mA. Thermal overload
protection limits total power dissipation in
the
BL9180.
When
the
junction
temperature exceeds TJ=165°C, the OTP
circuit starts the thermal shutdown function
turn the pass element off and allowing the
IC to cool. The OTP circuit turn on the pass
element
again
after
IC’s
junction
temperature cool by 30°C, result in a
pulsed output during continuous thermal
overload conditions. Thermal-overloaded
protection is designed to protect the
BL9180 in the event of fault conditions. Do
not exceed the absolute maximum junction
temperature rating of TJ=125°C for
continuous operation. The output can be
shorted to ground for an indefinite amount
of time without damaging the part by
cooperation of current limit and thermal
BL9180 Rev 2.2
8/2013
The maximum power dissipation is:
PD(MAX) = ( TJ(MAX) − TA ) /θJA
Current Limit and Thermal Protection
PPMIC BU
PD = (VIN−VOUT) ×IOUT + VIN×IQ
Where TJ(MAX) is the maximum operation
junction temperature 125°C, TA is the
ambient temperature and the θJA is the
junction to ambient thermal resistance. The
GND pin of the BL9180 performs the dual
function of providing an electrical
connection to ground and channeling heat
away. Connect the GND pin to ground
using a large pad or ground plane.
Capacitor Selection and Regulator
Stability
Like any low-dropout regulator, the external
capacitors used with the BL9180 must be
carefully selected for regulator stability and
performance. The BL9180 requires an
output capacitor between the VOUT and
GND pins for phase compensation. Using a
capacitor whose value is > 1μF on the
BL9180 input and the amount of
www.belling.com.cn
Belling Proprietary Information. Unauthorized Photocopy and Duplication Prohibited
© 2010 Belling All Rights Reserved
8
BL9180
Dual,300mA Ultra-low Noise
CMOS LDO Regulator
capacitance can be increased without limit.
impedance due to the load current change,
The input capacitor must be located a
and the transient response. The DC shift is
distance of not more than 0.5 inch from the
quite small due to the excellent load
input pin of the IC and returned to a clean
regulation of the IC. Typical output voltage
Step-Down
Converter
analog ground. Any good quality ceramic or
transient spike for a step change in the load
,
tantalum can be used for this capacitor.
current from 0mA to 50mA is tens of mV,
The capacitor with larger value and lower
depending on the ESR of the output
ESR
(equivalent
series
resistance)
capacitor. Increasing the output capacitor's
provides better PSRR and line-transient
value and decreasing the ESR attenuates
response. The output capacitor must meet
the overshoot.
both requirements for minimum amount of
Input-Output (Dropout) Voltage
capacitance and ESR in all LDOs
applications. The BL9180 is designed
A regulator's minimum input-output voltage
specifically to work with low ESR ceramic
differential (or dropout voltage) determines
output capacitor in space-saving and
the lowest usable supply voltage. In
performance consideration. Using a
battery-powered
systems,
this
will
ceramic capacitor whose value is at least
determine the useful end-of-life battery
1μF with ESR is > 5mΩ on the BL9180
voltage. Because the BL9180 uses a
output ensures stability. The BL9180 still
P-Channel MOSFET pass transistor, the
works well with output capacitor of other
dropout voltage is a function of
types due to the wide stable ESR range.
drain-to-source on resistance [RDS(ON)]
Output capacitor of larger capacitance can
multiplied by the load current.
reduce noise and improve load transient
response, stability, and PSRR. The output
Layout Considerations
capacitor should be located not more than
0.5 inch from the VOUT pin of the BL9180
and returned to a clean analog ground.
Load-Transient Considerations
The BL9180 load-transient response
graphs show two components of the output
response: a DC shift from the output
PPMIC BU
BL9180 Rev 2.2
8/2013
To improve ac performance such as PSRR,
output noise, and transient response, it is
recommended that the PCB be designed
with separate ground planes for VIN and
VOUT, with each ground plane connected
only at the GND pin of the device.
www.belling.com.cn
Belling Proprietary Information. Unauthorized Photocopy and Duplication Prohibited
© 2010 Belling All Rights Reserved
9
BL9180
Dual,300mA Ultra-low Noise
CMOS LDO Regulator
BL9180 Layout Circuit
J1
1
2
3
1
VIN
2
3
1
VIN
VIN
2
J2
3
1
C1
2
3
1
2
EN1
VOUT1
VDD
GND
EN2
VOUT2
BL9180 Rev 2.2
8/2013
5
Step-Down Converter
VOUT1
,
C2
4
VOUT2
VIN
BL9180
C3
3
Top Layer Layout
PPMIC BU
6
Bottom Layer Layout
www.belling.com.cn
Belling Proprietary Information. Unauthorized Photocopy and Duplication Prohibited
© 2010 Belling All Rights Reserved
10
BL9180
Dual,300mA Ultra-low Noise
CMOS LDO Regulator
Package Description
Step-Down Converter
,
PPMIC BU
BL9180 Rev 2.2
8/2013
www.belling.com.cn
Belling Proprietary Information. Unauthorized Photocopy and Duplication Prohibited
© 2010 Belling All Rights Reserved
11
BL9180
Dual,300mA Ultra-low Noise
CMOS LDO Regulator
Step-Down Converter
,
PPMIC BU
BL9180 Rev 2.2
8/2013
www.belling.com.cn
Belling Proprietary Information. Unauthorized Photocopy and Duplication Prohibited
© 2010 Belling All Rights Reserved
12
BL9180
Dual,300mA Ultra-low Noise
CMOS LDO Regulator
ESOP-8
Step-Down Converter
,
Symbol
A
A1
A2
A3
b
b1
c
c1
D
E
E1
e
L
L1
Θ
D1
E2
Dimensions In Millimeters
Min
NOM
0.08
1.2
0.55
0.39
0.38
0.21
0.19
4.7
5.8
3.7
0.18
1.4
0.65
0.5
0.41
0.2
4.9
6
3.9
1.27BSC
0.65
1.05BSC
0
Max
1.77
0.28
1.6
0.75
0.48
0.43
0.26
0.21
5.1
6.2
4.1
0.8
8°
3.30REF
2.40REF
ESOP-8 Surface Mount Package
PPMIC BU
BL9180 Rev 2.2
8/2013
www.belling.com.cn
Belling Proprietary Information. Unauthorized Photocopy and Duplication Prohibited
© 2010 Belling All Rights Reserved
13
Similar pages