4040 POWER INDUCTORS OutgassingCompliantPowerInductors AE465PYA ■ Exceptionally low DCR; soft saturation ■ Passes NASA low outgassing specifications ■ High temperature materials allow operation in ambient temperatures up to 155°C. ■ Passes vibration testing to 80 G and shock testing to 1000 G ■ Tin-lead (Sn-Pb) terminations for the best possible board adhesion Terminations Tin-lead (63/37) over copper. Core material Composite Weight 0.35 – 0.37 g Ambient temperature –55°C to +115°C with Irms current, +115°C to +155°C with derated current Storage temperature Component: –55°C to +155°C. Tape and reel packaging: –55°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Enhanced crush-resistant packaging 500/7″reel Plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 4.27 mm pocket depth Part number1 AE465PYA521MSZ AE465PYA681MSZ AE465PYA821MSZ AE465PYA102MSZ AE465PYA152MSZ AE465PYA222MSZ AE465PYA332MSZ AE465PYA472MSZ AE465PYA682MSZ AE465PYA822MSZ AE465PYA103MSZ AE465PYA153MSZ Inductance2 ±20% (µH) 0.52 0.68 0.82 1.0 1.5 2.2 3.3 4.7 6.8 8.2 10 15 DCR (mOhms)3 typ max 4.83 5.31 5.74 6.31 6.65 7.32 7.54 8.29 10.3 11.3 15.2 16.7 26.5 29.2 33.7 37.1 44.9 49.4 60.8 66.9 84.0 92.4 109 120 SRF (MHz)4 min typ 104 130 80 100 76 95 62 78 55 69 43 54 33 41 26 33 24 30 21 27 19 24 16 20 Isat (A)5 13.1 11.6 11.0 10.3 9.4 7.4 5.4 4.9 4.8 4.0 3.0 2.8 1. When ordering, please specify testing code: Irms Testing AE465PYA153MSZ Testing: Z = COTS H = Screening per Coilcraft CP-SA-10001 N = Screening per Coilcraft CP-SA-10004 2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using an Agilent/HP 4395A or equivalent. 5. Typical dc current at which the inductance drops 30% from its value without current. 6. Typical current that causes the specified temperature rise from 25°C ambient. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. ® Specifications subject to change without notice. Please check our website for latest information. 1102 Silver Lake Road Cary IL 60013 © Coilcraft, Inc. 2012 Irms (A)6 20°C rise 40°C rise 10.0 12.0 9.2 11.3 8.1 10.2 7.8 10.2 6.1 8.5 4.9 6.8 3.7 5.1 3.0 4.3 2.7 3.5 2.3 3.0 2.0 2.7 1.7 2.3 Irms testing was performed in still air on a 0.060 inch thick pcb with 4 oz copper traces (0.321 inch wide) capable of carrying 22 Amps. Temperature rise is highly dependent on many factors including pcb land pattern, trace size, and proximity to other components. Therefore temperature rise should be verified in application conditions. Document AE803-1 Phone 800-981-0363 Fax 847-639-1508 Revised 06/13/12 E-mail [email protected] Web www.coilcraft-cps.com 4040 POWER INDUCTORS AE465PYASeries Inductance (µH) 0.8 0.6 0.52 µH 0.4 0.2 0 0 1 2 4 3 5 7 6 8 Current (A) 9 10 11 13 14 12 Inductance (µH) 1.0 0.8 0.6 0.68 µH 0.4 0.2 0 0 1 2 3 4 5 6 7 8 Current (A) 9 10 11 12 13 14 Inductance (µH) 1.2 1.0 0.8 0.82 µH 0.6 0.4 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0 1 2 3 4 5 6 7 8 Current (A) 9 10 11 12 13 14 Inductance (µH) 0.2 0 1.0 µH 0 1 2 3 4 5 6 8 7 Current (A) 9 12 Inductance (µH) 2.0 1.6 1.2 1.5 µH 0.8 0.4 0 0 1 2 3 5 4 7 6 Current (A) 8 9 10 3.0 2.5 2.0 Inductance (µH) Inductance (µH) Inductance (µH) Inductance (µH) Inductance (µH) Inductance (µH) Inductance (µH) L vs Current 2.2 µH 1.5 1.0 0.5 0 0 1 2 3 4 Current (A) ® 5 6 7 8 4 3 3.3 µH 2 1 0 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 3.5 4.0 4.5 5.0 5.5 6.0 3.5 4.0 4.5 5.0 5.5 6.0 Current (A) 6 5 4 4.7 µH 3 2 1 0 0 0.5 1.0 1.5 2.0 2.5 3.0 Current (A) 10 8 6 6.8 µH 4 2 0 0 0.5 1.0 1.5 2.0 2.5 3.0 Current (A) 12 10 8 6 8.2 µH 4 2 0 0 0.5 1.0 1.5 2.0 2.5 3.0 Current (A) 3.5 4.0 4.5 5.0 16 12 10 µH 8 4 0 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 2.5 3.0 3.5 4.0 Current (A) 20 16 12 15 µH 08 04 0 0 0.5 1.0 Specifications subject to change without notice. Please check our website for latest information. 1102 Silver Lake Road Cary IL 60013 © Coilcraft, Inc. 2012 5 1.5 2.0 Current (A) Document AE803-2 Phone 800-981-0363 Fax 847-639-1508 Revised 06/13/12 E-mail [email protected] Web www.coilcraft-cps.com 4040 POWER INDUCTORS AE465PYASeries Irms Derating L vs Frequency 120 100 110 100 10 3.3 µH 2.2 µH 1.5 µH 1.0 µH 1 0.82 µH 0.68 µH 0.52 µH 90 80 70 60 50 40 25°C 8.2 µH 6.8 µH 4.7 µH Percent of rated Irms Inductance (µH) 15 µH 10 µH 30 20 0.1 10 0.1 10 1 100 Frequency (MHz) -20 0 20 40 60 0.157 ±0.012 4,0 ±0,3 50 15 µH 10 µH 8.2 µH 6.8 µH 4.7 µH 3.3 µH 2.2 µH 1.5 µH 1.0 µH 0.82 µH 0.68 µH 0.52 µH 45 40 35 30 80 0.157 ±0.012 4,0 ±0,3 25 20 15 0.161 max 4,10 10 Dash number -521 -681 -821 -102 -152 -222 -332 -472 -682 -822 -103 -153 A ±0.008 in ±0,20 mm (in / mm) 0.142 / 3.6 0.142 / 3.6 0.142 / 3.6 0.142 / 3.6 0.142 / 3.6 0.138 / 3.5 0.134 / 3.4 0.134 / 3.4 0.134 / 3.4 0.132 / 3.36 0.131 / 3.32 0.131 / 3.32 120 140 160 B (in / mm) 0.15 / 3.80 0.15 / 3.80 0.15 / 3.80 0.15 / 3.80 0.15 / 3.80 0.144 / 3.65 0.138 / 3.50 0.138 / 3.50 0.138 / 3.50 0.135 / 3.44 0.133 / 3.38 0.133 / 3.38 Suggested Land Pattern 5 0 100 Ambient temperature (°C) ESR vs Frequency Equivalent Series Resistance (Ohms) 0 -55 -40 0.1 10 1 100 Frequency (MHz) 0.031 ±0.002 0,85 ±0,05 0.093 2,37 A (see table) B (see table) 0.038 0,98 0.062 ±0.010 1,57 ±0,25 Dimensions are in ® Specifications subject to change without notice. Please check our website for latest information. 1102 Silver Lake Road Cary IL 60013 © Coilcraft, Inc. 2012 inches mm Document AE803-3 Phone 800-981-0363 Fax 847-639-1508 Revised 06/13/12 E-mail [email protected] Web www.coilcraft-cps.com