Tol RDC IDC ( H) % MAX IN ( ) (A) CDRH64B-100 10 @ 2.52 MHz CDRH64B-120 12 @ 2.52 MHz M 0.12 1.35 M 0.13 1.22 CDRH64B-150 15 @ 2.52 MHz CDRH64B-180 18 @ 2.52 MHz M 0.18 1.11 M 0.24 1.02 CDRH64B-220 22 @ 2.52 MHz CDRH64B-270 27 @ 2.52 MHz M 0.27 0.91 M 0.3 0.82 CDRH64B-330 33 @ 2.52 MHz CDRH64B-390 39 @ 2.52 MHz M 0.33 0.74 M 0.37 0.69 CDRH64B-470 47 @ 2.52 MHz CDRH64B-560 56 @ 2.52 MHz M 0.52 0.62 M 0.56 0.58 CDRH64B-680 68 @ 2.52 MHz CDRH64B-820 82 @ 2.52 MHz M 0.63 0.51 M 0.71 0.46 CDRH64B-101 100 @ 1.0 kHz CDRH64B-121 120 @ 1.0 kHz M 1.03 0.42 M 1.15 0.38 CDRH64B-151 150 @ 1.0 kHz CDRH64B-181 180 @ 1.0 kHz M 1.68 0.35 M 1.87 0.32 CDRH64B-221 220 @ 1.0 kHz CDRH64B-271 270 @ 1.0 kHz M 2.08 0.29 M 2.37 0.26 CDRH64B-331 330 @ 1.0 kHz CDRH64B-391 390 @ 1.0 kHz M 2.67 0.23 M 2.94 0.22 CDRH64B-471 470 @ 1.0 kHz CDRH64B-561 560 @ 1.0 kHz M 3.93 0.2 M 5.43 0.18 CDRH64B-681 680 @ 1.0 kHz CDRH64B-821 820 @ 1.0 kHz M 7.32 0.17 M 8.24 0.15 CDRH64B-102 1000 @ 1.0 kHz M 9.26 0.14 SPECIFICATION TYPE = CONSTRUCTION = TERIMAL COATING = OPERATING TEMP. = STORAGE TEMP = INSULATION RESISTANCE = DIELECTRIC STREGTH = HUMIDITY EFFECTS = PACKAGING MARKING CDRH64B SURFACE MOUNT POWER INDUCTOR NICKEL / SILVER -40 TO +85 C -55 TO +125 C 100MOhm. 100V TERMINAL-CORE 250Vac TERMINAL-CORE L 5 @ 95%RH, 40 C, 1HR Q 5 @ 95%RH, 40 C, 1HR = 1000PCS/REEL = 3 CHARACTERS, VALUE NOTE TOLERANCES L=15%; M=20%; N=30% 6.60 6.20 5.0 L 1.4 4.6 1.4 1.9 Part NAME PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AIT COMPONENTS LTD. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF AIT COMPONENTS LTD IS STRICTLY PROHIBITED. MATERIAL FINISH DATE AIT COMPONENTS LTD www.aitcomponents.com DRAWN CHECKED ENG APPR. -- UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS TOLERANCES: ONE PLACE DECIMAL +/-0.3 TWO PLACE DECIMAL +/-0.13 ANGLE +/-1 DEGREE -- DO NOT SCALE DRAWING TITLE: CDRH64B SMD POWER INDUCTOR SIZE A DWG. NO. SCALE:1:1 CDRH64B SMD POWER INDUCTOR SHEET 1 OF 1 REV. 00