SAW Components
SAW IF filter
Satellite radio
Series/type:
Ordering code:
B1720
B39121B1720H810
Date:
Version:
December 19, 2012
2.2
EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information
contained therein without EPCOS' prior express consent is prohibited.
EPCOS AG is a TDK Group Company.
SAW Components
B1720
SAW IF filter
115.18 MHz
Data sheet
Application
■
■
■
■
IF filter for digital radio
Low insertion attenuation
Constant group delay
Balanced to balanced operation
Features
Package size 7.0 x 5.0 x 1.33 mm3
Package code QCC12E
Maximum package height of 1.48 mm
RoHS compatible
Approximate weight 0.25 g
Ceramic package for Surface Mount Technology
(SMT)
■ Ni, gold-plated terminals
■ AEC-Q200 qualified component family
■ Electrostatic Sensitive Device (ESD)
■
■
■
■
■
■
Pin configuration
■
■
■
■
■
■
10
12
4
6
1,5,7,11
2,3,8,9
Input
Input
Output
Output
Case – ground
To be grounded
10
4
12
6
1,5,7,11
Please read cautions and warnings and
important notes at the end of this document.
2
December 19, 2012
SAW Components
B1720
SAW IF filter
115.18 MHz
Data sheet
Characteristics
Temperature range for specification:
Terminating source impedance:
Terminating load impedance:
T = –40 ˚C to +85 ˚C
ZS = 200 Ω and matching network
ZL = 200 Ω and matching network
min.
Nominal frequency
fN
—
typ.
@ 25 ˚C
115.18
Minimum insertion attenuation1)
αmin
—
14.2
15.7
dB
Amplitude ripple (p-p)
108.9300 ...
110.7875 ...
112.6450 ...
115.2050 ...
117.7150 ...
119.5725 ...
∆α
—
—
—
—
—
—
0.3
0.2
0.3
0.2
0.2
0.5
1.3
1.2
1.2
1.2
1.2
1.3
dB
dB
dB
dB
dB
dB
—
—
13.3
14.0
—
—
MHz
MHz
48.0
38.0
55.0
42.0
—
—
dB
dB
30.0
42.0
35.0
48.0
—
—
dB
dB
—
—
—
—
—
—
20
20
20
30
30
55
—
—
—
—
—
—
ns
ns
ns
ns
ns
ns
—
–18
—
ppm/K
110.7875
112.6450
115.1550
117.7150
119.5725
121.4300
MHz
MHz
MHz
MHz
MHz
MHz
Pass bandwidth
αrel ≤ 1.5 dB
αrel ≤ 3 dB
B1.5dB
B3dB
Attenuation (relative to αmin)
αrel
Lower sidelobe
90.000 ... 98.680 MHz
98.680 ... 104.680 MHz
Upper sidelobe
124.180 ... 131.180 MHz
131.180 ... 140.000 MHz
Group delay ripple (p-p)
108.9300 ... 110.7875
110.7875 ... 112.6450
112.6450 ... 115.1550
115.2050 ... 117.7150
117.7150 ... 119.5725
119.5725 ... 121.4300
—
MHz
∆τ
MHz
MHz
MHz
MHz
MHz
MHz
Temperature coefficient of frequency
1)
max.
TCf
Including losses in the matching network
Inductor type TOKO LL1005FHL
Please read cautions and warnings and
important notes at the end of this document.
3
December 19, 2012
SAW Components
B1720
SAW IF filter
115.18 MHz
Data sheet
Matching network to 200 Ω (element values depend on PCB layout)
Ls2
Ls3
Lp1 = 56 nH
Lp4
Lp1
Ls2 = 18 nH
Ls3 = 27 nH
Lp4 = 68 nH
Ls2
Ls3
Maximum ratings
Operable temperature range
Storage temperature range
DC voltage
Source power
T
Tstg
VDC
PS
–40/+85
–40/+85
6
10
˚C
˚C
V
dBm
Transfer function
Please read cautions and warnings and
important notes at the end of this document.
4
December 19, 2012
SAW Components
B1720
SAW IF filter
115.18 MHz
Data sheet
Transfer function (pass band)
Transfer function (wide band)
Please read cautions and warnings and
important notes at the end of this document.
5
December 19, 2012
SAW Components
B1720
SAW IF filter
115.18 MHz
Data sheet
References
Type
B1720
Ordering code
B39121B1720H810
Marking and package
C61157-A7-A103
Packaging
F61074-V8170-Z000
Date codes
L_1126
S-parameters
B1720_NB_UN.s4p
See file header for port/pin assignment table.
Soldering profile
S_6001
RoHS compatible
RoHS-compatible means that products are compatible with the
requirements according to Art. 4 (substance restrictions) of Directive 2011/65/EU of the European Parliament and of the
Council of June 8th, 2011, on the restriction of the use of certain
hazardous substances in electrical and electronic equipment
("Directive") with due regard to the application of exemptions as
per Annex III of the Directive in certain cases.
Matching coils
See Inductor pdf-catalog
http://www.tdk.co.jp/tefe02/coil.htm#aname1
and Data Library for circuit simulation
http://www.tdk.co.jp/etvcl/index.htm
for a large variety of matching coils.
For further information please contact your local EPCOS sales office or visit our webpage at
www.epcos.com .
Published by EPCOS AG
Systems, Acoustics, Waves Business Group
P.O. Box 80 17 09, 81617 Munich, GERMANY
EPCOS AG 2012. This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
the type in question please also contact one of our Sales Offices.
Please read cautions and warnings and
important notes at the end of this document.
6
December 19, 2012
Important notes
The following applies to all products named in this publication:
1.
2.
3.
4.
5.
6.
7.
Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately
incumbent on the customer to check and decide whether an EPCOS product with the
properties described in the product specification is suitable for use in a particular customer
application.
We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained
by third parties in the event of malfunction or failure of an electronic component.
The warnings, cautions and product-specific notes must be observed.
In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be
available. The aforementioned does not apply in the case of individual agreements deviating
from the foregoing for customer-specific products.
Unless otherwise agreed in individual contracts, all orders are subject to the current
version of the “General Terms of Delivery for Products and Services in the Electrical
Industry” published by the German Electrical and Electronics Industry Association
(ZVEI).
The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CSMP, CSSP, CTVS,
DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC,
MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL,
SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap
are trademarks registered or pending in Europe and in other countries. Further information
will be found on the Internet at www.epcos.com/trademarks.
7
December 19, 2012