• 1N962BUR-1 thru 1N986BUR-1 AVAILABLE IN PER MIL-PRF-19500/117 JAN, JANTX AND JANTXV 1N962BUR-1 thru 1N986BUR-1 and CDLL957B thru CDLL986B • ZENER DIODES • LEADLESS PACKAGE FOR SURFACE MOUNT • METALLURGICALLY BONDED MAXIMUM RATINGS Operating Temperature: -65°C to +175°C Storage Temperature: -65°C to +175°C DC Power Dissipation: 500mW @ TEC = +125°C Power Derating: 10 mW / °C above TEC = +125°C Forward Voltage @ 200mA: 1.1 volts maximum ELECTRICAL CHARACTERISTICS @ 25°C CDI TYPE NUMBER NOMINAL ZENER VOLTAGE VZ (NOTE 1) (NOTE 2) ZENER TEST CURRENT l ZT MAXIMUM ZENER IMPEDANCE (NOTE 3) ZZT @ l ZT MAX. DC ZENER CURRENT l ZM MAX. REVERSE LEAKAGE CURRENT lR @ VR ZZK @ l ZK VOLTS mA OHMS OHMS mA mA µA VOLTS CDLL957B CDLL958B CDLL959B CDLL960B CDLL961B 6.8 7.5 8.2 9.1 10 18.5 16.5 15.0 14.0 12.5 4.5 5.5 6.5 7.5 8.5 700 700 700 700 700 1.0 .5 .5 .5 .25 55 50 45 41 38 5.0 5.0 5.0 5.0 2.0 5.2 5.7 6.2 6.9 7.6 CDLL962B CDLL963B CDLL964B CDLL965B CDLL966B 11 12 13 15 16 11.5 10.5 9.5 8.5 7.8 9.5 11.5 13 16 17 700 700 700 700 700 .25 .25 .25 .25 .25 32 31 28 25 24 1.0 1.0 0.5 0.5 0.5 8.4 9.1 9.9 11 12 CDLL967B CDLL968B CDLL969B CDLL970B CDLL971B 18 20 22 24 27 7.0 6.2 5.6 5.2 4.6 21 25 29 33 41 750 750 750 750 750 .25 .25 .25 .25 .25 20 18 16 15 13 0.5 0.5 0.5 0.5 0.5 14 15 17 18 21 CDLL972B CDLL973B CDLL974B CDLL975B CDLL976B 30 33 36 39 43 4.2 3.8 3.4 3.2 3.0 49 58 70 90 93 1000 1000 1000 1000 1500 .25 .25 .25 .25 .25 12 11 10 9.5 8.8 0.5 0.5 0.5 0.5 0.5 23 25 27 30 33 CDLL977B CDLL978B CDLL979B CDLL980B CDLL981B 47 51 56 62 68 2.7 2.5 2.2 2.0 1.8 105 125 150 185 230 1500 1500 2000 2000 2000 .25 .25 .25 .25 .25 7.9 7.4 6.8 6.0 5.5 0.5 0.5 0.5 0.5 0.5 36 39 43 47 52 CDLL982B CDLL983B CDLL984B CDLL985B CDLL986B 75 82 91 100 110 1.7 1.5 1.4 1.3 1.1 270 330 400 500 750 2000 3000 3000 3000 4000 .25 .25 .25 .25 .25 5.0 4.6 4.1 3.7 3.3 0.5 0.5 0.5 0.5 0.5 56 62 69 76 84 NOTE 1 Zener voltage tolerance on "B" suffix is + 5%. Suffix letter “A” denotes + 10%. No Suffix denotes + 20%. "C" suffix denotes + 2%, and "D" suffix denotes + 1%. NOTE 2 Zener voltage is measured with the device junction in thermal equilibrium at an ambient temperature of 25°C + 3°C. NOTE 3 Zener impedance is derived by superimposing on 1ZT A 60Hz rms a.c. current equal to 10% of 1ZT. DIM D F G G1 S MILLIMETERS INCHES MIN MAX MIN MAX 1.60 1.70 0.063 0.067 0.41 0.55 0.016 0.022 3.30 3.70 .130 .146 2.54 REF. .100 REF. 0.03 MIN. .001 MIN. FIGURE 1 DESIGN DATA CASE: DO-213AA, Hermetically sealed glass case. (MELF, SOD-80, LL34) LEAD FINISH: Tin / Lead THERMAL RESISTANCE: (ROJEC): 100 °C/W maximum at L = 0 inch THERMAL IMPEDANCE: (ZJX): 35 °C/W maximum POLARITY: Diode to be operated with the banded (cathode) end positive. MOUNTING SURFACE SELECTION: The Axial Coefficient of Expansion (COE) Of this Device is Approximately +6PPM/°C. The COE of the Mounting Surface System Should Be Selected To Provide A Suitable Match With This Device. 6 LAKE STREET, LAWRENCE, MASSACHUSETTS 01841 PHONE (978) 620-2600 FAX (978) 689-0803 WEBSITE: http://www.microsemi.com 103 CDLL957 CDLL986B thru FIGURE 2 Pd, Rated Power Dissipation (mW) 500 400 300 200 100 0 0 25 50 75 100 125 150 175 TEC , End cap temperature (°C) POWER DERATING CURVE 1000 500 400 300 3. 3 VO LT 27 VO LT 1 100 5. LT VO ZENER IMPEDANCE ZZT (OHMS) 200 50 40 30 11 20 VO LT 10 6.2 VO LT 5 4 3 2 1 .1 .2 .3 .4 .5 1 2 5 10 20 OPERATING CURRENT lZT (mA) 30 40 50 100 FIGURE 3 ZENER IMPEDANCE VS. OPERATING CURRENT 104