Comchip ACGRBT204-HF Smd general purpose rectifier Datasheet

SMD General Purpose Rectifiers
ACGRBT201-HF Thru. ACGRBT205-HF
Glass Passivated Type
Reverse Voltage: 200 to 1000 Volts
Forward Current: 2.0 Amp
RoHS Device
Halogen Free
2114
0.209(5.30)
0.201(5.10)
Features
- Glass passivated cavity-free junction.
)
.71
8(0 68)
.
.02
R0 027(0
.
R0
0.146(3.70)
0.138(3.50)
- Lead less chip form, no lead damage.
- Low forward voltage drop.
0.119(3.01)
Typ.
- Plastic package has UL 94V-0.
0.049(1.25)
0.041(1.05)
- Comply with AEC-Q101
0.049(1.25)
0.041(1.05)
0.053(1.35)
0.041(1.05)
Mechanical data
- Case: Packed with FRP substrate and epoxy underfilled.
Dimensions in inches and (millimeter)
- Terminals: Pure Tin plated (Lead-Free), solderable
per MIL-STD-750, method 2026.
Circuit Diagram
- Polarity: Cathode Band, Laser marking.
- Weight: 0.04 grams (approx).
Absolute Maximum Ratings (at Ta=25°C unless otherwise noted)
Symbol
ACGRBT
201-HF
ACGRBT
202-HF
ACGRBT
203-HF
ACGRBT
204-HF
ACGRBT
205-HF
Units
Repetitive peak reverse voltage
VRRM
200
400
600
800
1000
V
Peak forward surge current, 8.3ms
single half sine-wave superimposed
on rate load (JEDEC method)
IFSM
50
A
Average forward current
IF(AV)
2.0
A
TJ
-65 to +175
°C
TSTG
-65 to +175
°C
Parameter
Operating junction temperature
Storage temperature
Electrical Characteristics (at TA=25°C unless otherwise noted)
Parameter
Conditions
Symbol
MIN.
TYP.
MAX.
Unit
Forward voltage
IF =2.0A
VF
-
0.96
1
V
Repetitive peak reverse current
VR =Max. VRRM, TA=25°C
IRRM
-
0.10
5
uA
Junction capacitance
VR=4V, f=1.0MHZ
CJ
-
14
-
pF
Junction to ambient (Note)
RθJA
-
66
-
Junction to lead (Note)
RθJL
-
8
-
Thermal Resistance
°C/W
Notes: Thermal resistance from junction to ambient and from junction to lead P.C.B. monuted on 0.2×0.2”(5.0*5.0mm) copper pad areas.
Company reserves the right to improve product design , functions and reliability without notice.
REV:B
AQW-JG002
Page 1
Comchip Technology CO., LTD.
SMD General Purpose Rectifiers
RATING AND CHARACTERISTIC CURVES (ACGRBT201-HF thru. ACGRBT205-HF)
FIG.1 - FORWARD CURRENT DERATING CURVE
FIG.2 - MAXIMUM NON-REPETITIVE
PEAK FORWARD SURGE CURRENT
60
PEAK FORWARD SURGE CURRENT, (A)
AVERAGE FORWARD RECTIFIED
CURRENT, (A)
2.5
2.0
1.5
1.0
0.5
60Hz
RESISTIVE OR
INDUCTIVE LOAD
40
30
20
10
0
0
0
25
50
75
100
125
150
1
175
100
NUMBER OF CYCLES AT 60Hz
FIG.3 - TYPICAL INSTANTANEOUS
FORWARD CHARACTERISTICS
FIG.4 - TYPICAL REVERSE CHARACTERISTICS
100
INSTANTANEOUS REVERSE LEAKAGE
CURRENT, (uA)
1.00
0.10
0.01
0.2
10
LEAD TEMPERATURE, (°C)
10.00
IINSTANTANEOUS FORWARD CURRENT, (A)
8.3ms SINGLE HALF SINE-WAVE
50
TJ=150°C
10
TJ=125°C
1.0
0.10
TJ=25°C
0.01
0.001
0.4
0.6
0.8
1.0
1.2
1.4
0
INSTANTANEOUS FORWARD VOLTAGE, (V)
20
40
60
80
100
PERCENT OF RATED PEAK REVERSE VOLTAGE, (%)
FIG.5 - TYPICAL JUNCTION CAPACITANCE
200
JUNCTION CAPACITANCE, (pF)
100
TJ=25°C
10
1
0.1
1.0
10
100
REVERSE VOLTAGE, (V)
Company reserves the right to improve product design , functions and reliability without notice.
REV:B
AQW-JG002
Page 2
Comchip Technology CO., LTD.
SMD General Purpose Rectifiers
Reel Taping Specification
d
P0
P1
E
Index hole
F
W
B
P
C
A
12
o
0
D2
D1 D
W1
Trailer
.......
.......
End
Device
.......
.......
Leader
.......
.......
.......
.......
160mm (min)
Start
400mm (min)
Direction of Feed
2114
SYMBOL
A
B
C
d
D
D1
D2
(mm)
3.95 ± 0.10
5.55 ± 0.10
1.45 ± 0.10
1.50 ± 0.10
330.00 ± 2.00
50.00 MIN.
13.00 ± 0.50
(inch)
0.156 ± 0.004
0.219 ± 0.004
0.057 ± 0.004
0.059 ± 0.004
12.992 ± 0.079
1.969 MIN.
0.512 ± 0.020
E
F
P
P0
P1
W
W1
(mm)
1.75 ± 0.10
5.50 ± 0.05
8.00 ± 0.10
4.00 ± 0.10
2.00 ± 0.10
12.00 ± 0.30
18.70 MAX.
(inch)
0.069 ± 0.004
0.217 ± 0.002
0.315 ± 0.004
0.157 ± 0.004
0.079 ± 0.004
0.472 ± 0.012
0.736 MAX.
SYMBOL
2114
Company reserves the right to improve product design , functions and reliability without notice.
REV:B
AQW-JG002
Page 3
Comchip Technology CO., LTD.
SMD General Purpose Rectifiers
Marking Code
Part Number
Marking Code
ACGRBT201-HF
20D
ACGRBT202-HF
20G
ACGRBT203-HF
20J
ACGRBT204-HF
20K
ACGRBT205-HF
20M
BGC
.XXX.
XXX = Product type marking code
Suggested PAD Layout
2114
B
SIZE
(mm)
(inch)
A
3.00MIN.
0.118MIN.
B
2.65MAX.
0.104MAX.
C
6.65REF.
0.262 REF.
A
C
Standard Packaging
REEL PACK
Case Type
2114
REEL
Reel Size
( pcs )
(inch)
5,000
13
Company reserves the right to improve product design , functions and reliability without notice.
REV:B
AQW-JG002
Page 4
Comchip Technology CO., LTD.
Similar pages