Panasonic EEHZA1E560P Conductive polymer hybrid aluminum electrolytic capacitor/za Datasheet

Conductive Polymer Hybrid Aluminum Electrolytic Capacitor/ZA
Surface Mount Type
Series:
ZA
Type:
V
High temperature Lead-Free reflow
■ Features
●
●
●
●
Endurance: 5000 h at 105 °C
Low ESR and High ripple current (70 % over, Lower ESR than Current V-FP)
Low LC (0.01 CV or 3 µA)
Equivalent to conductive polymer type Aluminum Electrolytic Capacitor
(There are little characteristics change by temperature and frequency)
● RoHS directive compliant
■ Specifications
Category Temp. Range
–55 °C to +105 °C
Rated W.V.Range
25 V.DC to 63 V.DC
Nominal Cap.Range
10 µF to 330 µF
Capacitance Tolerance
±20 % (120 Hz/+20 °C)
I < 0.01 CV or 3 (µA) After 2 minutes (whichever is greater)
DC Leakage Current
tan δ
Please see the attached Standard Products list
The capacitor shall be subjected to application of the D.C. voltage with full rated ripple current at +105 °C for
5000 hours. After stabilizing at room temperature(+15 to 35 °C), the capacitor shall not exceed the specified
limits.
(The sum of DC voltage and ripple peak voltage shall not exceed the rated voltage.)
Capacitance change
±30 % of initial measured value
Endurance
tan δ
< 200 % of initial specified value
E. S. R.
< 200 % of initial specified value
< initial specified value
DC leakage current
Size Code
ESR after Endurance
(액/100 kHz) (–40 °C)
C
D
D8
F
G
2.0
1.4
0.8
0.4
0.3
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C,
capacitors shall meet the limits specified in Endurance. (With voltage treatment)
Shelf Life
After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Resistance to
Soldering Heat
Capacitance change
±10 % of initial measured value
tan δ
DC leakage current
< initial specified value
< initial specified value
■ Frequency correction factor for ripple current
Frequency (Hz)
Correction factor
1k
0.30
10 k
0.60
100 k to
1.00
0.3 max.
A±0.2
–
Series identification
B±0.2
H
φD±0.5
Capacitance (µF)
33
E ZA
K
Marking color : BLACK
Negative polarity marking (–)
L
Pressure Relief (φ10 and larger)
(P)
Example:25 V 33 µF
(I)
■ Dimensions in mm (not to scale)
+
(I)
■ Marking
120
0.10
W
( ) Reference size
Rated Voltage Mark
Lot number
Rated Voltage Mark
E
(mm)
Size
code
25 V
V
35 V
H
50 V
J
63 V
D
L
A, B
C
5.0 5.8±0.3 5.3
D
6.3 5.8±0.3 6.6
D8 6.3 7.7±0.3 6.6
F
8.0 10.2±0.3 8.3
G 10.0 10.2±0.3 10.3
H
I
W
P
K
6.5 max.
7.8 max.
7.8 max.
10.0 max.
12.0 max.
2.2
2.6
2.6
3.4
3.5
0.65±0.1
0.65±0.1
0.65±0.1
0.90±0.2
0.90±0.2
1.5
1.8
1.8
3.1
4.6
0.15
0.35 +- 0.20
+ 0.15
0.35 - 0.20
0.15
0.35 +- 0.20
0.70±0.2
0.70±0.2
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
03 Jan. 2012
Conductive Polymer Hybrid Aluminum Electrolytic Capacitor/ZA
■ Standard Products
Endurance : 105 °C 5000 h
Case size
W.V.
(V)
25
35
50
63
E.S.R.
tan δ
(100 kHz)
(+20 °C)
(m액)
80
(120 Hz)
(+20 °C)
0.14
EEHZA1E330R
(5)
(pcs)
1000
0.14
EEHZA1E560P
(5)
1000
Dia.
Length
(µF)
33
(mm)
5
(mm)
5.8
C
Ripple
Current
(100 kHz)
(+105 °C)
(mA r.m.s.)
900
56
6.3
5.8
D
1300
50
Cap.
(±20 %)
Min.
Packaging Q'ty
Specification
Size
Code
Part No.
Reflow
(RoHS:compliant)
Taping
100
6.3
7.7
D8
2000
30
0.14
EEHZA1E101XP
(5)
900
220
8
10.2
F
2300
27
0.14
EEHZA1E221P
(6)
500
330
10
10.2
G
2500
20
0.14
EEHZA1E331P
(6)
500
22
5
5.8
C
900
100
0.12
EEHZA1V220R
(5)
1000
27
6.3
5.8
D
1300
60
0.12
EEHZA1V270P
(5)
1000
47
6.3
5.8
D
1300
60
0.12
EEHZA1V470P
(5)
1000
68
6.3
7.7
D8
2000
35
0.12
EEHZA1V680XP
(5)
900
27
0.12
EEHZA1V151P
(6)
500
150
8
10.2
F
2300
270
10
10.2
G
2500
20
0.12
EEHZA1V271P
(6)
500
10
5
5.8
C
750
120
0.10
EEHZA1H100R
(5)
1000
22
6.3
5.8
D
1100
80
0.10
EEHZA1H220P
(5)
1000
33
6.3
7.7
D8
1600
40
0.10
EEHZA1H330XP
(5)
900
68
8
10.2
F
1800
30
0.10
EEHZA1H680P
(6)
500
100
10
10.2
G
2000
28
0.10
EEHZA1H101P
(6)
500
10
6.3
5.8
D
1000
120
0.08
EEHZA1J100P
(5)
1000
22
6.3
7.7
D8
1500
80
0.08
EEHZA1J220XP
(5)
900
33
8
10.2
F
1600
40
0.08
EEHZA1J330P
(6)
500
56
10
10.2
G
1800
30
0.08
EEHZA1J560P
(6)
500
The taping dimensions are explained on EE188 of our Catalog. Please use it as a reference guide.
Reflow Profile(Fig-5, Fig-6) listed on EE186 of our Catalog.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
03 Feb. 2012
Similar pages