Click on Series name for product info on aimtec.com Series AM40E-Z 40 Watt | DC-DC Converter FEATURES: Wide 2:1 Input Range Adjustable Single Output Voltage Undervoltage lockout High Power Density Efficiency up to 92% Remote On/Off Function Soft start Models Single output Model Input Voltage (V) Output Voltage (V) AM40E-1203SZ 9-18 AM40E-1205SZ 9-18 AM40E-1212SZ 9-18 AM40E-1215SZ 9-18 AM40E-2403SZ 18-36 AM40E-2405SZ 18-36 AM40E-2412SZ 18-36 AM40E-2415SZ 18-36 AM40E-4803SZ 36-75 AM40E-4805SZ 36-75 AM40E-4812SZ 36-75 AM40E-4815SZ 36-75 Add suffix “-K” for optional heat sink Output Current max (A) 3.3 5 12 15 3.3 5 12 15 3.3 5 12 15 8 8 3.33 2.67 8 8 3.33 2.67 8 8 3.33 2.67 Maximum Capacitive load (µF) Efficiency (%) 21800 13600 2300 1500 21800 13600 2300 1500 21800 13600 2300 1500 90 91 91 91 91 92 91 92 91 92 91 92 Maximum Capacitive load (µF) Efficiency (%) Models Dual output Model Input Voltage (V) Output Voltage (V) Output Current max (A) AM40E-1212DZ 9-18 ±12 ±1.67 ±1200 91 AM40E-1215DZ 9-18 ±15 ±1.33 ±750 92 AM40E-2412DZ 18-36 ±12 ±1.67 ±1200 91 AM40E-2415DZ 18-36 ±15 ±1.33 ±750 92 AM40E-4812DZ 36-75 ±12 ±1.67 ±1200 92 AM40E-4815DZ 36-75 ±15 ±1.33 ±750 92 Add suffix “-K” for optional heat sink NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Input Specifications Parameters Voltage range Filter Start up time Absolute Maximum Rating Peak Input Voltage time On/Off control Under voltage lockout Input Reflected Ripple Current www.aimtec.com F 051e R12.D Nominal 12 24 48 Typical 9-18 18-36 36-75 π (Pi) Network 30 Maximum Units VDC ms 25 50 VDC 100 1 s ON: 3 ~12VDC or open circuit ; OFF – 0 ~ 1.2VDC or Short circuit between pin 2 and pin 3 (OFF idle current: 5mA Typical) 12V ON/OFF 8.6 / 7.9 24V ON/OFF 17.8 / 16 VDC 48V ON/OFF 33.5 / 30.5 20 mA p-p 12 24 48 Tel: +1 514 620 2722 1 of 7 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM40E-Z 40 Watt | DC-DC Converter Isolation Specifications Parameters Conditions Tested I/O voltage Case/Input and Output Resistance Capacitance Typical 3 sec 3 sec Rated Units 1600 VDC VDC MOhm pF 1600 <1000 1000 Output Specifications Parameters Conditions Typical Voltage accuracy Cross Regulation (Dual Output Models) Over voltage protection Over load protection Short Circuit protection Short circuit restart Line voltage regulation Load voltage regulation (Single) Load voltage regulation (Dual) Temperature coefficient 25% load on one output 100% load on second load 3.3Vout/5Vout other models Voltage adjustment range (single) Minimum Load Current Units % ±5 % Zener diode clamp 130 Continuous Auto-Recovery ±0.5 ±0.5 ±1 ±0.02 100 150 HL-LL 0% to 100% load 0% to 100% load Ripple & Noise (20MHz Bandwidth) Maximum ±1 % of Iout % % % %/oC mV p-p ±10 0 % % of Max General Specifications Parameters Switching frequency Operating temperature Storage temperature Maximum case temperature Derating Cooling Humidity Case material Weight Dimensions (L x W x H) MTBF Maximum soldering temperature Transient recovery time Transient recovery deviation Conditions Typical 100% load See derating chart Maximum Units 270 -40 to +71 -40 to +125 105 2.5 Free Air Convection 95 Nickel coated Copper 32 2.00 x 1.00 x 0.40 inches 50.80 x 25.40 x 10.16 mm >328,000 hrs (MIL-HDBK -217F, Ground Benign, t=+25ºC)hours 1.5mm from case for 10 sec 260 250 ±3 KHz o C o C o C %/ oC % RH g o C µS % Safety Specifications Parameters Agency Approval Safety www.aimtec.com F 051e R12.D CE EN55022: 2006 + A1:2007, Class B IEC61000-3-2:2006+A2:2009 IEC61000-3-3:2008 EN55024:1998 + A1:2001 + A2:2003 IEC61000-4-2: 2008 IEC61000-4-3:2006+A1: 2007 IEC61000-4-4:2004 IEC61000-4-5:2005 IEC61000-4-6:2008 IEC61000-4-8:2009 NOTE: also designed to meet IEC 60950-1:2001 Tel: +1 514 620 2722 2 of 7 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM40E-Z 40 Watt | DC-DC Converter Pin Out Specifications Pin 1 2 3 4 5 6 Single + V Input - V Input On/Off Control + V Output -V Output Trim Dual + V Input - V Input On/Off Control + V Output Common - V Output 10.16 (0.40) 2.54 (0.10) 5.08 (0.20) 5.08 (0.20) 5.08 (0.20) 10.16 (0.40) 10.16 (0.40) 25.40 (1.00) 10.16 (0.40) Dimensions Dimensions with Optional Heatsink Notes: Add “-K” suffix for ordering, heat sink is affixed with thermally dissipative adhesive tape. See derating graph for temperature performance. Heat sink material is anodized (black) aluminum, adds weight 11.2g to total mass (42.2g). Thermal impedance of converter is: with heat sink 10Ԩ/W and 12Ԩ/W without heat sink. www.aimtec.com F 051e R12.D Tel: +1 514 620 2722 3 of 7 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM40E-Z 40 Watt | DC-DC Converter Trimming Derating Extended temperature performance can be achieved with optional heat sink. (add suffix “–K” to part number) www.aimtec.com F 051e R12.D Tel: +1 514 620 2722 4 of 7 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM40E-Z 40 Watt | DC-DC Converter Input Reflected Ripple Current Test Step Output Ripple and noise reduction Control ON/OFF pin connection example www.aimtec.com F 051e R12.D Tel: +1 514 620 2722 5 of 7 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM40E-Z 40 Watt | DC-DC Converter EMI Filter www.aimtec.com F 051e R12.D Tel: +1 514 620 2722 6 of 7 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM40E-Z 40 Watt | DC-DC Converter Model AM40E-12xxSZ (single) AM40E-24xxSZ (single) AM40E-48xxSZ (single) AM40E-12xxDZ (dual) AM40E-24xxDZ (dual) AM40E-48xxDZ (dual) C1 220µF, 100V 220µF, 100V 220µF, 100V 220µF, 100V 220µF, 100V 220µF, 100V L1 Common Choke 68µH Common Choke 68µH Common Choke 68µH Common Choke 68µH Common Choke 68µH Common Choke 68µH C2/C3/C5/C6 1812,6.8µF, 50V 1812,4.7µF, 50V 1812,1.5µF, 50V 1812,6.8µF, 50V 1812,4.7µF, 50V 1812,1.5µF, 50V C4 C7 C8 C9 1206,1000pF, 2KV 1206,1000pF, 2KV 1206,1000pF, 2KV 1206,1000pF, 2KV 1206,1000pF, 2KV 1206,1000pF, 2KV 1206,1000pF, 2KV 1206,1000pF, 2KV 1206,1000pF, 2KV 1206,1000pF, 2KV 1206,1000pF, 2KV 330µF, 100V 220µF, 100V 220µF, 100V 330µF, 100V 220µF, 100V 220µF, 100V EFT/Surge +V output +V input C1 DC/DC Converter Load 220uF 100V -V input -V output NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R12.D Tel: +1 514 620 2722 7 of 7 Toll free: + 1 888 9 AIMTEC (924 6832) North America only