Series AM2F-Z 2 Watt | DC-DC Converter FEATURES: • • • • • • • RoHS compliant 12 Pin SIP Package Low ripple and noise High efficiency up to 70% o o Operating temperature -40 C to + 85 C Input / Output Isolation 1000, 3000 or 5200VDC Pin compatible with multiple manufacturers Models Single output Input/Output Isolation 1000VDC Model Input Voltage (V) AM2F-0503SZ 4.5-5.5 AM2F-0505SZ 4.5-5.5 AM2F-0507SZ 4.5-5.5 AM2F-0509SZ 4.5-5.5 AM2F-0512SZ 4.5-5.5 AM2F-0515SZ 4.5-5.5 AM2F-0518SZ 4.5-5.5 AM2F-0524SZ 4.5-5.5 AM2F-1203SZ 10.8-13.2 AM2F-1205SZ 10.8-13.2 AM2F-1207SZ 10.8-13.2 AM2F-1209SZ 10.8-13.2 AM2F-1212SZ 10.8-13.2 AM2F-1215SZ 10.8-13.2 AM2F-1218SZ 10.8-13.2 AM2F-1224SZ 10.8-13.2 AM2F-2403SZ 21.6-26.4 AM2F-2405SZ 21.6-26.4 AM2F-2407SZ 21.6-26.4 AM2F-2409SZ 21.6-26.4 AM2F-2412SZ 21.6-26.4 AM2F-2415SZ 21.6-26.4 AM2F-2418SZ 21.6-26.4 AM2F-2424SZ 21.6-26.4 Input/Output Isolation 3000VDC AM2F-0503SH30Z 4.5-5.5 AM2F-0505SH30Z 4.5-5.5 AM2F-0507SH30Z 4.5-5.5 AM2F-0509SH30Z 4.5-5.5 AM2F-0512SH30Z 4.5-5.5 AM2F-0515SH30Z 4.5-5.5 AM2F-0518SH30Z 4.5-5.5 AM2F-0524SH30Z 4.5-5.5 AM2F-1203SH30Z 10.8-13.2 AM2F-1205SH30Z 10.8-13.2 AM2F-1207SH30Z 10.8-13.2 AM2F-1209SH30Z 10.8-13.2 AM2F-1212SH30Z 10.8-13.2 AM2F-1215SH30Z 10.8-13.2 AM2F-1218SH30Z 10.8-13.2 AM2F-1224SH52Z 10.8-13.2 AM2F-2403SH30Z 21.6-26.4 AM2F-2405SH30Z 21.6-26.4 Output Voltage (V) Output Current max (mA) Capacitive load, max (μF) Efficiency (%) 3.3 5 7.2 9 12 15 18 24 3.3 5 7.2 9 12 15 18 24 3.3 5 7.2 9 12 15 18 24 600 400 278 222 167 134 111 83 600 400 278 222 167 134 111 83 600 400 278 222 167 134 111 83 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 64 66 64 66 70 70 67 68 64 66 63 66 70 70 66 68 54 64 63 64 68 68 68 70 3.3 5 7.2 9 12 15 18 24 3.3 5 7.2 9 12 15 18 24 3.3 5 600 400 278 222 167 134 111 83 600 400 278 222 167 134 111 83 600 400 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 64 66 64 66 70 70 67 68 64 66 63 66 70 70 66 68 64 64 Models www.aimtec.com F 051e R6.B Tel: +1 514 620 2722 1 of 3 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM2F-Z 2 Watt | DC-DC Converter Single output (continued) Input/Output Isolation 3000VDC Model Input Voltage (V) Output Voltage (V) Output Current max (A) Capacitive load, max (μF) Efficiency (%) 7.2 9 12 15 18 24 278 222 167 134 111 83 470 470 470 470 470 470 63 64 68 68 68 70 3.3 5 7.2 9 12 15 18 24 3.3 5 7.2 9 12 15 18 24 3.3 5 7.2 9 12 15 18 24 600 400 278 222 167 134 111 83 600 400 278 222 167 134 111 83 600 400 278 222 167 134 111 83 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 53 66 64 66 70 70 67 68 53 66 63 66 70 70 66 68 54 64 63 64 68 68 68 70 AM2F-2407SH30Z 21.6-26.4 AM2F-2409SH30Z 21.6-26.4 AM2F-2412SH30Z 21.6-26.4 AM2F-2415SH30Z 21.6-26.4 AM2F-2418SH30Z 21.6-26.4 AM2F-2424SH30Z 21.6-26.4 Input/Output Isolation 5200VDC AM2F-0503SH52Z 4.5-5.5 AM2F-0505SH52Z 4.5-5.5 AM2F-0507SH52Z 4.5-5.5 AM2F-0509SH52Z 4.5-5.5 AM2F-0512SH52Z 4.5-5.5 AM2F-0515SH52Z 4.5-5.5 AM2F-0518SH52Z 4.5-5.5 AM2F-0524SH52Z 4.5-5.5 AM2F-1203SH52Z 10.8-13.2 AM2F-1205SH52Z 10.8-13.2 AM2F-1207SH52Z 10.8-13.2 AM2F-1209SH52Z 10.8-13.2 AM2F-1212SH52Z 10.8-13.2 AM2F-1215SH52Z 10.8-13.2 AM2F-1218SH52Z 10.8-13.2 AM2F-1224SH52Z 10.8-13.2 AM2F-2403SH52Z 21.6-26.4 AM2F-2405SH52Z 21.6-26.4 AM2F-2407SH52Z 21.6-26.4 AM2F-2409SH52Z 21.6-26.4 AM2F-2412SH52Z 21.6-26.4 AM2F-2415SH52Z 21.6-26.4 AM2F-2418SH52Z 21.6-26.4 AM2F-2424SH52Z 21.6-26.4 Input Specifications Parameters Voltage range Nominal Typical 5 12 24 Filter Turn on Transient process time Start up time Absolute Maximum Rating Maximum 4.5-5.5 10.8-13.2 21.6-25.4 Units VDC Capacitor 100 300 0-7 0-15 0-28 100 5 Vin 12 Vin 24 Vin Peak Input Voltage time ms ms VDC ms Isolation Specifications Parameters Tested I/O voltage Resistance Capacitance www.aimtec.com F 051e R6.B Conditions Typical 3 sec > 1000 60 Tel: +1 514 620 2722 2 of 3 Rated Units 1000, 3000 or 5200 VDC MOhm pF Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM2F-Z 2 Watt | DC-DC Converter Output Specifications Parameters Voltage accuracy Short Circuit protection Short Circuit restart Line voltage regulation (Single) Load voltage regulation (Single) Load voltage regulation (Single) 3.3V output model Temperature coefficient Conditions Typical Units % Continuous Auto-recovery Load 0 – 100% ±0.5 ±0.5 % % Load 0 – 100% ±1.5 % ±0.02 %/ C 75 mV p-p 150 ms At 20MHz Bandwidth Ripple & Noise Maximum ±2 Rising time o General Specifications Parameters Switching frequency Operating temperature Storage temperature Max Case temperature Cooling Humidity Case material Weight Dimensions (L x W x H) MTBF Conditions Typical 100% load Full Load without Derating 50 Maximum Units KHz o C o C o C % % -40 to +85 -40 to +125 90 Free air convection 90 Plastic UL94-VO g 3.8 1.25 x 0.34 x 0.53 inches 31.80 x 8.60 x 13.47 mm o >1 500 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25 C) NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified Pin Out Specifications Dimensions Pin 1000VDC 3000 and 5200VDC 1 2 3 9 10 11 12 +V Input N.C. N.C. N.C. -V Output +V Output -V Input +V Input -V Input N.C. N.C. -V Output +V Output N.C. 8.60 (0.34) 31.80 (1.25) PRINTED FACE 13.47 (0.53) 13.97 (0.55) 0.50 (0.02) 2.54 (0.10) 27.94 (1.10) 8.60 (0.34) 3.81 (0.15) 3.05 (0.12) 0.25 (0.01) 0.50 (0.02) 0.50 (0.02) NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R6.B Tel: +1 514 620 2722 3 of 3 Toll free: + 1 888 9 AIMTEC (924 6832) North America only