Coilcraft DS5022P-473ML Smt power inductor Datasheet

Document 188-1
SMT Power Inductors – DS5022P Series
The DS5022 Series of magnetically shielded power
inductors is designed for the higher current requirements of portable computers, video recorders and other
DC-DC conversion applications.
They feature saturation current ratings as high as
18 Amps and rms current ratings up to 6.5 Amps. Low
DC resistance (as low as 0.040 Ohms) keeps power
losses to a minimum.
For new designs, consider the MSS1278 as an alternative to this series. The MSS1278 series is more cost
effective, features a smaller footprint, lower DCR and
better current handling. We will continue to manufacture
and support the DS5022P indefinitely.
1
Part Number
DS5022P-102ML_
DS5022P-222ML_
DS5022P-332ML_
DS5022P-472ML_
DS5022P-562ML_
DS5022P-103ML_
DS5022P-153ML_
DS5022P-223ML_
DS5022P-333ML_
DS5022P-473ML_
DS5022P-683ML_
DS5022P-104ML_
DS5022P-154ML_
DS5022P-224ML_
DS5022P-274ML_
DS5022P-334ML_
DS5022P-474ML_
DS5022P-684ML_
DS5022P-824ML_
DS5022P-105ML_
L
DCR
±20%2 max
(µH) (Ohms)
1.0 0.016
2.2 0.023
3.3 0.026
4.7 0.028
5.6 0.030
10
0.040
15
0.048
22
0.059
33
0.075
47
0.097
68
0.138
100
0.207
150
0.293
220
0.47
270
0.64
330
0.78
470
1.08
680
1.40
820
1.70
1000
2.01
SRF
typ
(MHz)
130
70
60
40
33
30
20
18
14
10
9.0
7.0
6.0
5.0
4.5
4.0
3.0
2.5
2.2
2.0
Isat3
(A)
18.0
14.0
12.5
11.5
10.8
8.0
7.0
6.0
5.0
4.0
3.0
2.4
2.1
1.9
1.4
1.1
1.1
0.96
0.88
0.80
Irms4
(A)
6.5
5.0
4.7
4.4
4.1
3.9
3.4
3.1
2.8
2.4
2.0
1.7
1.3
1.1
0.95
0.86
0.73
0.64
0.58
0.53
1. When ordering, please specify termination and packaging codes:
DS5022P-105MLD
Termination: L = RoHS compliant gold over nickel over phos bronze.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging: D = 13″ machine-ready reel. EIA-481 embossed plastic
tape (250 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter D instead.
2. Inductance tested at 0.1 Vrms, 100 kHz, 0 Adc.
3. DC current at which the inductance drops 10% (typ) from its value
without current.
4. Current that causes a 40°C temperature rise from 25°C ambient.
5. Ambient temperature range: –40°C to +85°C with Irms current
+85°C to +125°C with derated current
6. Storage temperature range: Component: –40°C to +125°C
Packaging: –40°C to +80°C
7. Resistance to soldering heat: Three reflows at >217°C for 90 seconds
(+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room
temperature between.
8. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Specifications subject to change without notice.
Please check our website for latest information.
© Coilcraft, Inc. 2008
Document 188-1
Revised 10/06/08
Document 188-2
SMT Power Inductors - DS5022P Series
Typical L vs Current
Typical L vs Frequency
10000
10000
1000 µH
100 µH
100
10 µH
10
1000 µH
1000
Inductance (µH)
Inductance (µH)
1000
100 µH
100
10 µH
10
1
1
0.1
10
1
100
0.01
1
0.1
Current (A)
10
Frequency (MHz)
Irms Derating
0.710 ±0.020*
18,03 ±0,508
an additional 0.02/0,508
* Allow
in width and 0.01/0,254 in
height for optional tin-lead and
tin-silver-copper application.
120
110
0.600
max
15,24
90
80
0.380
dia
9,65
70
0.500
dia
12,70
60
50
0.300
max*
7,62
40
25°C
Percent of rated Irms
100
30
Recommended
Land Pattern
20
0.100
2,54
10
0.100
2,54
0.490
12,45
0
-40
-20
0
20
40
60
80
100
120 140
0.115
2,92
Ambient temperature (°C)
0.510 ±0.010
12,95 ±0,25
Internal
code
Dash
number
XXX
X
Start
0.110
2,79
Finish
Part marking since Feb. 2005. Parts manufactured
prior to that date may have color dots.
Visit www.coilcraft.com/colrpowr.cfm for details.
Weight:
2.6 – 3.0 g
Tape and reel: 250/13″ reel 32 mm tape width
For packaging data see Tape and Reel Specifications section.
Specifications subject to change without notice.
Please check our website for latest information.
© Coilcraft, Inc. 2008
Document 188-2
Revised 10/06/08
Similar pages