Pan Jit EST1GF Plastic package has underwriters laboratory Datasheet

EST1AF SERIES
SUPERFAST RECOVERY RECTIFIERS
VOLTAGE
50~400 Volt
1 Ampere
CURRENT
FEATURES
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
Flame Retardant Epoxy Molding Compound
• Exceeds environmental standards of MIL-S-19500/228
• Super fast recovery times, high voltage
• Ultra thin profile package for space constrained utilization
• Package suitable for automated handling
• Lead free in compliance with EU RoHS 2011/65/EU directive
• Green molding compound as per IEC61249 Std. . (Halogen Free)
MECHANICAL DATA
Case : SMAF Molded Plastic
Terminals : Solderable per MIL-STD-750, Method 2026
Polarity : Color band denotes cathode end
Standard packaging : 12mm tape (EIA-481)
Weight : 0.0011 ounces, 0.0328 grams
1
Marking : Part number
2
Cathode
Anode
MAXIMUM RATINGS(TA=25oC unless otherwise noted)
PARAMETER
SYMBOL EST1AF EST1BF EST1CF EST1DF EST1EF EST1GF UNIT
Maximum recurrent peak reverse voltage
VRRM
50
100
150
200
300
400
V
Maximum rms voltage
VRMS
35
70
105
140
210
280
V
VR
50
100
150
200
300
400
V
Maximum dc blocking voltage
Maximum average forward rectified current
I F(AV)
1
A
Peak forward surge current 8.3ms single half
sine-wave superimposed on rated load
I FSM
30
A
0.95
1.25
V
Maximum forward voltage at 1A
VF
Maximum dc reverse current at rated dc blocking
voltage
IR
Typical junction capacitance
(Note 1)
CJ
Maximum reverse recovery time
(Note 2)
TRR
25
Typical thermal resistance
(Note 3)
(Note 4)
RJL
RJA
20
150
TJ
-55 to + 150
o
C
TSTG
-55 to + 150
o
C
Operating junction temperature range
Storage temperature range
1
20
A
16
pF
nS
o
C/W
Note:1.Measured at 1 MHz and Applied Reverse Voltage of 4 Volts.
2.Reverse Recovery Test Conditions: IF=0.5A, IR=1A, Recover to 0.25A.
3.Mounted on a FR4 PCB, single-sided copper, with 10cm*10cm copper pad area.
4.Mounted on a FR4 PCB, single-sided copper, mini pad.
January 3,2014-REV.01
PAGE . 1
1.2
1
0.8
0.6
0.4
0.2
0
0
25
50
75
100
125
150
TC , Case Temperature (°C)
0.1
TJ = 125°C
0.01
TJ = 75°C
0.001
0.0001
0.00001
50~200V
TJ = 25°C
40
80
10
300~400V
1
120
160
100
TJ = 150°C
300~400V
10
1
TJ = 125°C
0.1
TJ = 75°C
0.01
0.001
200
TJ = 25°C
80
160
240
320
400
Rated Peak Reverse Voltage (V)
Fig.3 Typical Reverse Characteristics
Fig.4 Typical Reverse Characteristics
10
IF, Forward Current (A)
10
IF, Forward Current (A)
10
VR , Reverse Bias Voltage (V)
Rated Peak Reverse Voltage (V)
50~200V
1
TJ = 150°C
TJ = 125°C
0.1
TJ = 75°C
TJ = 25°C
0.01
1
100
TJ = 150°C
1
50~200V
Fig.2 Typical Junction Capacitance
IR, Reverse Current (μA)
IR, Reverse Current (μA)
Fig.1 Forward Current Derating Curve
10
100
CJ, Junction Capacitance (pF)
IF, Forward Current (A)
EST1AF SERIES
0.2
0.4
0.6
0.8
1
VF , Forward Voltage (V)
Fig.5 Typical Forward Characteristics
January 3,2014-REV.01
300~400V
TJ = 150°C
1
TJ = 125°C
0.1
TJ = 75°C
TJ = 25°C
0.01
0.2
0.4
0.6
0.8
1
1.2
1.4
VF , Forward Voltage (V)
Fig.6 Typical Forward Characteristics
PAGE . 2
EST1AF SERIES
MOUNTING PAD LAYOUT
0.232
(5.9)
0.063
(1.6)
0.075
(1.9)
0.106
(2.7)
ORDER INFORMATION
• Packing information
T/R - 10K per 13" plastic Reel
T/R - 3K per 7" plastic Reel
January 3,2014-REV.01
PAGE . 3
EST1AF SERIES
Part No_packing code_Version
EST1AF_R1_00001
EST1AF_R2_00001
For example :
RB500V-40_R2_00001
Serial number
Version code means HF
Packing size code means 13"
Part No.
Packing type means T/R
Packing Code XX
Packing type
Tape and Ammunition Box
(T/B)
Tape and Reel
(T/R)
Bulk Packing
(B/P)
Tube Packing
(T/P)
Tape and Reel (Right Oriented)
(TRR)
Tape and Reel (Left Oriented)
(TRL)
FORMING
January 3,2014-REV.01
Version Code XXXXX
1st Code
Packing size code
A
N/A
0
HF
0
serial number
R
7"
1
RoHS
1
serial number
B
13"
2
T
26mm
X
S
52mm
Y
L
F
PANASERT T/B CATHODE UP
(PBCU)
PANASERT T/B CATHODE DOWN
(PBCD)
2nd Code HF or RoHS 1st Code 2nd~5th Code
U
D
PAGE . 4
EST1AF SERIES
Disclaimer
• Reproducing and modifying information of the document is prohibited without permission
from Panjit International Inc..
• Panjit International Inc. reserves the rights to make changes of the content herein the
document anytime without notification. Please refer to our website for the latest
document.
• Panjit International Inc. disclaims any and all liability arising out of the application or use of
any product including damages incidentally and consequentially occurred.
• Panjit International Inc. does not assume any and all implied warranties, including warranties
of fitness for particular purpose, non-infringement and merchantability.
• Applications shown on the herein document are examples of standard use and operation.
Customers are responsible in comprehending the suitable use in particular applications.
Panjit International Inc. makes no representation or warranty that such applications will be
suitable for the specified use without further testing or modification.
•
The products shown herein are not designed and authorized for equipments requiring high
level of reliability or relating to human life and for any applications concerning life-saving
or life-sustaining, such as medical instruments, transportation equipment, aerospace
machinery et cetera. Customers using or selling these products for use in such applications
do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages
resulting from such improper use or sale.
• Since Panjit uses lot number as the tracking base, please provide the lot number for tracking
when complaining.
January 3,2014-REV.01
PAGE . 5
Similar pages