date 08/13/2012 page 1 of 5 SERIES: ETS 120~150 W │ DESCRIPTION: AC-DC POWER SUPPLY FEATURES • • • • • • • up to 150 W power universal input (90~264 Vac) single regulated output from 12~24 V over load and short circuit protections UL/cUL and TUV safety approvals level V efficiency custom designs available RoHS MODEL ETS1201000U output voltage output current output power ripple1 (Vdc) max (A) max (W) max (mVp-p) 12 10 120 200 efficiency level V ETS135890U 13.5 8.9 120.2 200 V ETS150830U 15 8.3 124.5 200 V ETS160810U 16 8.1 129.6 200 V ETS180750U 18 7.5 135 250 V ETS190750U 19 7.5 142.5 250 V ETS200710U 20 7.1 142 250 V ETS240625U 24 6.25 150 250 V Notes: 1. At full load, 100 ~ 240 Vac input, 20 MHz bandwidth oscilloscope, each output terminated with 10 μF aluminum electrolytic and 0.1 μF ceramic capacitors. PART NUMBER KEY ETS135890U - T C - P51 - ET - CXX Base Number example of 13.5 Vdc, 8.9 A AC Input Plug: blank = IEC 320 C14 plug T = IEC 3210 C6 plug Input Cable: C = included blank = no cable cui.com 4 position “Power DIN” Reserved for Custom Configurations Factory Designation CUI Inc │ SERIES: ETS 120~150 W │ DESCRIPTION: AC-DC POWER SUPPLY date 08/13/2012 │ page 2 of 5 INPUT parameter conditions/description min voltage 90 frequency 47 typ current inrush current at 230 Vac, cool start no load power consumption power factor correction complies with IEC 61000-3-2 class D, at 100 Vac harmonic standard, input power > 75W, at 240 Vac 0.95 0.9 conditions/description min max units 264 Vac 63 Hz 2.5 A 100 A 0.5 W max units OUTPUT parameter load regulation typ ±5 % 140 % 140 % PROTECTIONS parameter conditions/description over voltage protection over current protection short circuit protection auto restart SAFETY & COMPLIANCE parameter conditions/description min typ isolation voltage input to output at 10 mA for 1 second safety approvals UL/cUL (60950-1), EN 60950-1/IEC 60950-1, CSA C22 60950-1-03 EMI/EMC FCC Part 15 Class B, CE, CNS 13438 class B, CISPR 22 class B, EN 55022; EN 55024; EN 61000-(2, 3); IEC 61000-4-(2, 3, 4, 5, 6, 8, 11) RoHS compliant yes MTBF max units 1,800 Vac 40,000 hours ENVIRONMENTAL parameter conditions/description min max units 0 40 °C storage temperature -20 85 °C operating humidity 20 80 % 0 90 % operating temperature storage humidity cui.com typ CUI Inc │ SERIES: ETS 120~150 W │ DESCRIPTION: AC-DC POWER SUPPLY date 08/13/2012 │ page 3 of 5 MECHANICAL parameter conditions/description dimensions 3.173 x 1.969 x 1.220 (80.6 x 50 x 31 mm) min input plug IEC320 / C14 weight typ MECHANICAL DRAWING units: mm Optional: IEC 320 C6 input plug cui.com units inch 115 Standard: IEC 320 C14 input plug max g CUI Inc │ SERIES: ETS 120~150 W │ DESCRIPTION: AC-DC POWER SUPPLY date 08/13/2012 │ page 4 of 5 AC CORD C6 C14 cui.com CUI Inc │ SERIES: ETS 120~150 W │ DESCRIPTION: AC-DC POWER SUPPLY date 08/13/2012 │ page 5 of 5 REVISION HISTORY rev. description date 1.0 initial release 10/22/2010 1.01 V-Infinity branding removed, safety and EMI/EMC data updated 08/13/2012 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com [email protected] This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CUI offers a one (1) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.