BSO200N03S OptiMOS®2 Power-Transistor Product Summary Features • Fast switching MOSFET for SMPS • Optimized technology for notebook DC/DC V DS 30 V R DS(on),max 20 mΩ ID 8.8 A 1 • Qualified according to JEDEC for target applications • N-channel • Logic level P-DSO-8 • Excellent gate charge x R DS(on) product (FOM) • Very low on-resistance R DS(on) • Avalanche rated • dv /dt rated Type Package Ordering Code Marking BSO200N03S P-DSO-8 Q67042-S4212 200N3S Maximum ratings, at T j=25 °C, unless otherwise specified Parameter Continuous drain current Value Symbol Conditions ID Unit 10 secs steady state T A=25 °C2) 8.8 7.0 T A=70 °C2) 7.1 5.6 A Pulsed drain current I D,pulse T A=25 °C3) 35 Avalanche energy, single pulse E AS I D=8.8 A, R GS=25 Ω 17 mJ Reverse diode dv /dt dv /dt I D=8.8 A, V DS=20 V, di /dt =200 A/µs, T j,max=150 °C 6 kV/µs Gate source voltage V GS Power dissipation P tot Operating and storage temperature T j, T stg ±20 T A=25 °C2) 1.56 -55 ... 150 W °C 55/150/56 IEC climatic category; DIN IEC 68-1 Rev. 1.11 2.5 V page 1 2004-02-09 BSO200N03S Parameter Values Symbol Conditions Unit min. typ. max. - - 35 minimal footprint, t p≤10 s - - 110 minimal footprint, steady state - - 150 6 cm2 cooling area2), t p≤10 s - - 50 6 cm2 cooling area2), steady state - - 80 Thermal characteristics Thermal resistance, junction - soldering point R thJS Thermal resistance, junction - ambient R thJA K/W Electrical characteristics, at T j=25 °C, unless otherwise specified Static characteristics Drain-source breakdown voltage V (BR)DSS V GS=0 V, I D=1 mA 30 - - Gate threshold voltage V GS(th) V DS=V GS, I D=10 µA 1.2 1.6 2 Zero gate voltage drain current I DSS V DS=30 V, V GS=0 V, T j=25 °C - 0.1 1 V DS=30 V, V GS=0 V, T j=125 °C - 10 100 V µA Gate-source leakage current I GSS V GS=20 V, V DS=0 V - 10 100 nA Drain-source on-state resistance R DS(on) V GS=4.5 V, I D=7.3 A - 25 31 mΩ V GS=10 V, I D=8.8 A - 16.6 20 - 0.9 - Ω 9.5 19 - S Gate resistance RG Transconductance g fs 1) |V DS|>2|I D|R DS(on)max, I D=8.8 A J-STD20 and JESD22 2) Device on 40 mm x 40 mm x 1.5 mm epoxy PCB FR4 with 6 cm 2 (one layer, 70 µm thick) copper area for drain connection. PCB is vertical in still air. 3) See figure 3 Rev. 1.11 page 2 2004-02-09 BSO200N03S Parameter Values Symbol Conditions Unit min. typ. max. - 630 840 - 220 290 Dynamic characteristics Input capacitance C iss Output capacitance C oss Reverse transfer capacitance C rss - 31 46 Turn-on delay time t d(on) - 2.9 4.3 Rise time tr - 2.6 3.9 Turn-off delay time t d(off) - 12 17 Fall time tf - 1.8 2.7 Gate to source charge Q gs - 1.8 2.4 Gate charge at threshold Q g(th) - 1.0 1.3 Gate to drain charge Q gd - 1.2 1.9 Switching charge Q sw - 2.1 3.0 Gate charge total Qg - 4.9 6.5 Gate plateau voltage V plateau - 2.9 - Gate charge total, sync. FET Q g(sync) V DS=0.1 V, V GS=0 to 5 V - 4.2 5.6 Output charge Q oss V DD=15 V, V GS=0 V - 5 7 - - 2.5 - - 35 V GS=0 V, V DS=15 V, f =1 MHz V DD=15 V, V GS=10 V, I D=4.4 A, R G=2.7 Ω pF ns Gate Charge Characteristics4) V DD=15 V, I D=4.4 A, V GS=0 to 5 V nC V nC Reverse Diode Diode continous forward current IS Diode pulse current I S,pulse Diode forward voltage V SD V GS=0 V, I F=2.5 A, T j=25 °C - 0.77 1 V Reverse recovery charge Q rr V R=12 V, I F=I S, di F/dt =400 A/µs - - 6 nC 4) T A=25 °C A See figure 16 for gate charge parameter definition Rev. 1.11 page 3 2004-02-09 BSO200N03S 1 Power dissipation 2 Drain current P tot=f(T A); t p≤10 s I D=f(T A); V GS≥10 V; t p≤10 s 3 10 2.5 8 2 I D [A] P tot [W] 6 1.5 4 1 2 0.5 0 0 0 40 80 120 160 0 40 80 T A [°C] 3 Safe operation area 160 4 Max. transient thermal impedance 1) I D=f(V DS); T A=25 °C ; D =0 Z thJS=f(t p) parameter: t p parameter: D =t p/T 102 120 T A [°C] 102 100 100 10 µs 101 0.5 100 µs 10 101 0 10 limited by on-state resistance 1 Z thJS [K/W] I D [A] 1 ms 10 10 ms 0.1 0.05 10 s 100 10-1 0.2 1 0.02 0.01 0.1 DC single pulse 10-2 0.1 1 -1 10 Rev. 1.11 10-1 0.01 10 0 10 100 1 V DS [V] 10 2 10 page 4 0.1 0.00001 0.0001 0.001 0.01 0.1 1 10 10-5 10-4 10-3 10-2 10-1 100 101 t p [s] 2004-02-09 BSO200N03S 5 Typ. output characteristics 6 Typ. drain-source on resistance I D=f(V DS); T j=25 °C R DS(on)=f(I D); T j=25 °C parameter: V GS parameter: V GS 12 60 10 V 10 3.6 V 3.3 V 3.4 V 40 R DS(on) [mΩ] 8 3.2 V I D [A] 4V 3.8 V 50 4.5 V 6 3.1 V 3V 4 4.2 V 30 4.5 V 5V 20 10 V 2 10 2.8 V 2.6 V 0 0 0 1 2 3 0 10 V DS [V] 20 30 20 30 I D [A] 7 Typ. transfer characteristics 8 Typ. forward transconductance I D=f(V GS); |V DS|>2|I D|R DS(on)max g fs=f(I D); T j=25 °C parameter: T j 30 40 35 25 30 20 g fs [S] I D [A] 25 15 20 15 10 10 5 125 °C 5 25 °C 0 0 0 1 2 3 4 0 I D [A] V GS [V] Rev. 1.11 10 page 5 2004-02-09 BSO200N03S 9 Drain-source on-state resistance 10 Typ. gate threshold voltage R DS(on)=f(T j); I D=8.8 A; V GS=10 V V GS(th)=f(T j); V GS=V DS parameter: I D 35 2.5 30 2 25 100 µA 20 V GS(th) [V] R DS(on) [mΩ] 98 % typ 15 1.5 10 µA 1 10 0.5 5 0 0 -60 -20 20 60 100 140 180 -60 -20 20 60 100 140 180 T j [°C] T j [°C] 11 Typ. capacitances 12 Forward characteristics of reverse diode C =f(V DS); V GS=0 V; f =1 MHz I F=f(V SD) parameter: T j 103 102 1000 100 Ciss 150 °C 25 °C 102 150 °C, 98 % 101 10 100 1 I F [A] C [pF] Coss 100 Crss 25 °C, 98% 101 10-1 10 0 10 20 30 V DS [V] Rev. 1.11 0.1 0 0.2 0.4 0.6 0.8 1 1.2 V SD [V] page 6 2004-02-09 BSO200N03S 13 Avalanche characteristics 14 Typ. gate charge I AS=f(t AV); R GS=25 Ω V GS=f(Q gate); I D=4.4 A pulsed parameter: T j(start) parameter: V DD 10 12 25 °C 15 V 10 100 °C 6V 24 V 125 °C V GS [V] I AV [A] 8 1 6 4 2 0.1 0 1 10 100 1000 0 2 4 6 8 10 Q gate [nC] t AV [µs] 15 Drain-source breakdown voltage 16 Gate charge waveforms V BR(DSS)=f(T j); I D=1 mA 36 V GS 34 Qg 32 V BR(DSS) [V] 30 28 V g s(th) 26 24 Q g (th) 22 Q sw Q gs 20 -60 -20 20 60 100 140 Q gate Q gd 180 T j [°C] Rev. 1.11 page 7 2004-02-09 BSO200N03S Package Outline P-DSO-8: Outline Footprint Packaging Tape Tube Dimensions in mm Rev. 1.11 page 8 2004-02-09 BSO200N03S Published by Infineon Technologies AG Bereich Kommunikation St.-Martin-Straße 53 D-81541 München © Infineon Technologies AG 1999 All Rights Reserved. Attention please! The information herein is given to describe certain components and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts started herein. Infineon Technologies is an approved CECC manufacturer. Information For further information on technology, delivery terms and conditions and prices, please contact your nearest Infineon Technologies office in Germany or our Infineon Technologies representatives worldwide (see address list). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact your nearest Infineon Technologies office. Infineon Technologies' components may only be used in life-support devices or systems with the expressed written approval of Infineon Technologies if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Rev. 1.11 page 9 2004-02-09