LinkCom BPHE010C501-50 10w led driver Datasheet

10W LED Driver
Constant Current Mode
10W-BPH Series
www.linkcom.com.tw For more information, please contact with: [email protected]
FEATURES:
● AC Input 90~264 Vac Nominal
● AC Inrush current: 40 A at 240 Vac Cold start
● Protection: SCP / OVP / OTP
● High Operating Ambient Temp.: -20℃ ~ +60℃
● Surge Protection: L-N 0.5 kV
● Safety: UL 1310 / PSE
● EMI: CE / Meets FCC
● Comply with Indoor/Outdoor Waterproof (IP 67)
● Warranty: 2 years (refer to LinkCom warranty policy)
● RoHS Compliant
PRODUCT SPECIFICATION
DC OUTPUT
POWER(W)
DC OUTPUT
VOLTAGE(V)
OUTPUT
CURRENT(mA)
OUTPUT
CURRENT
TOLERANCE
EFFICIENCY
O/P NOISE(P-P,V)
BPHE010C201-50
9.6
3-48
216-264
─
70%
0.25
BPHE010C251-50
10
3-40
234-286
─
70%
0.25
BPHE010C301-50
10.88
3-34
288-352
─
70%
0.25
BPHE010C351-50
10.5
3-30
333-407
─
70%
0.25
BPHE010C401-50
10
3-25
369-451
─
70%
0.25
BPHE010C451-50
10.8
3-24
414-506
─
70%
0.25
BPHE010C501-50
10
3-20
459-561
─
70%
0.25
BPHE010C601-50
10.2
3-17
549-671
─
70%
0.25
BPHE010C701-50
10.5
3-15
636-781
─
70%
0.25
BPHE010C751-50
9.75
3-13
684-836
─
70%
0.25
BPHE010C801-50
9.6
3-12
729-891
─
70%
0.25
MODEL
ELECTRICAL SPECIFICATION
INPUT VOLTAGE RANGE
90-264 Vac, 127-373 Vdc, Normal: 100-240 Vac
INPUT FREQUENCY
Range: 47-63 Hz, Normal: 50-60 Hz
ACTIVE POWER FACTOR
NA
THD
NA
TURN ON DELAY TIME
3200ms, 2000ms at full load 115 Vac / 230 Vac
AC CURRENT
<0.3 A 110 Vac; <0.15A 230 Vac
INRUSH CURRENT (typ)
Cold Start 40 A at 240 Vac
LEAKAGE CURRENT
< 0.7 mA / 264 Vac
SHORT CIRCUIT PROTECTION
SCP will restart automatically after the fault condition is removed
OVER VOLTAGE PROTECTION
OVP will restart automatically after the fault condition is removed
OVER TEMP. PROTECTION
OTP will restart automatically after the fault condition is removed
OVER CURRENT PROTECTION
NA
-20 ℃ ~ +60 ℃
OPERATING TEMP.
-40 ℃ ~ +80 ℃
STORAGE TEMP.
RELATIVE HUMIDITY
10% to +90%, non-cond.
SAFETY
UL 1310 / PSE
EMI
EN55015 / Meets FCC Part15
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
DIMENSION (L*W*H)
I/P-O/P:4.242 kVdc I/P-CASE:4 kVdc
I/P-O/P :100M Ω / 500 Vdc / 25℃ / 70% RH
97.5 * 40 * 30.5 mm【3.84 * 1.57 * 1.2 inch】
(1) All parameters specified at 230 Vac input unless otherwise noted.
(2) All specifications typical at 25℃, unless otherwise noted, at normal line and load.
(3) Ripple and noise measured directly at pins/terminals at nom. load, 0.1uF bypass and 47uF electrolytic, pk-pk at 20MHz bandwidth.
(4) Specified for free-air convection cooling.
(5) Minimum load is NOT required for proper operation .
(6) 100% Production tested.
*REFERENCE: www.linkcom.com.tw
*Please contact [email protected], [email protected] for more information
Linkcom Manufacturing Co., Ltd.
5F., No. 127, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231-45, Taiwan ▪ T: +886-2-8919-1380 ▪ F: +886-2-8919-1370 ▪ www.linkcom.com.tw
10W LED Driver
Constant Current Mode
10W-BPH Series
www.linkcom.com.tw For more information, please contact with: [email protected]
DIMENSIONS
Tc Max.
BPHE010C451 as Tc Max. Reference
*REFERENCE: www.linkcom.com.tw
Linkcom Manufacturing Co., Ltd.
5F., No. 127, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231-45, Taiwan ▪ T: +886-2-8919-1380 ▪ F: +886-2-8919-1370 ▪ www.linkcom.com.tw
10W LED Driver
Constant Current Mode
10W-BPH Series
www.linkcom.com.tw For more information, please contact with: [email protected]
Output Current vs. Load(BPHE010C701)
Output Current vs. Load
0.720
Output Current (A)
0.700
0.680
0.660
Vin=100
0.640
Vin=120
Vin=200
0.620
Vin=230
Vin=264
0.600
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
110%
Load (%)
Efficiency vs. Load(BPHE010C701)
Efficiency vs. Load
80.0%
Efficiency (%)
70.0%
60.0%
50.0%
40.0%
Vin=100
30.0%
Vin=120
Vin=200
20.0%
Vin=230
10.0%
Vin=264
0.0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
110%
Load(%)
Linkcom Manufacturing Co., Ltd.
5F., No. 127, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231-45, Taiwan ▪ T: +886-2-8919-1380 ▪ F: +886-2-8919-1370 ▪ www.linkcom.com.tw
Similar pages