T•P T•P DU RO C NEW IDC SHROUDED LATCHED HEADER RIGHT ANGLED 2.0mm DU RO C Industry compatible Competitively priced Various Plating contacts available 2.00 mm pitch Long or Short Latch SPECIFICATION Material & Finish Contact Material: Brass Insulator Material: PBT, Glass Reinforced, rated UL-94V-0 Current Rating: 1 Amp Contact Resistance: 30M Ω Max. Insulator Resistance: 3000M Ω Min. Position 10 12 14 16 20 22 24 26 30 34 40 44 50 68 Dielectric Withstanding Voltage: 500V AC for One Minute Operating Temperature: -40°C to + 105°C A 25.7 27.7 29.7 31.7 35.7 37.7 39.7 41.7 45.7 49.7 55.7 59.7 65.7 83.7 B 8.0 10.0 12.0 14.0 18.0 20.0 22.0 24.0 28.0 32.0 38.0 42.0 48.0 66.0 C 15.8 17.8 19.8 21.8 25.8 27.8 29.8 31.8 35.8 39.8 45.8 49.8 55.8 73.8 OUTLINE DRAWING C B 4.0 Y X 6.0 2.0 0.5*0.5 SECTION 15 2.0 A ACCESSORIES Long Latch Short Latch X 19.7 16.9 2.0 Y 11.5 8.7 2.0 2.0 0.81+_0.05 3.0 Reccomended PCB Layout ORDERING INFORMATION DBC IDC C6A 34 A G A 1 Dubilier Connectors IDC Connector Series Nº of Ways Contact Material Contact Plating Features Colour A=Brass G= Gold Flash S=Selective *=Other Plating available A=Long Latch B=Short Latch 1=Black 10=10way 12=12way 14=14way 16=16way 20=20way 22=22way 24=24way 26=26way 30=30way 34=34way 40=40way 44=44way 50=50way 60=60way 331 Fax: 01371 875075 www.dubilier.co.uk Tel: 01371 875758