GE B125C1000G Glass passivated single-phase bridge rectifier Datasheet

B40C1000G THRU B380C1000G
GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER
Reverse Voltage - 65 to 600 Volts
Forward Current -1.0 Ampere
FEATURES
Case Style WOG
0.388 (9.86)
0.348 (8.84)
♦ Plastic package has Underwriters Laboratory Flammability
Classification 94V-0
♦ Glass passivated chip junctions
♦ High case dielectric strength
♦ Typical IR less than 0.1 µ A
♦ High overload surge current
♦ Ideal for printed circuit boards
♦ High temperature soldering guaranteed:
260°C/10 seconds, 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension
0.220 (5.6)
0.160 (4.1)
1.0
(25.4)
MIN.
0.032 (0.81)
0.060 (1.52)
0.028 (0.71)
0.020 (0.51)
0.220 (5.6)
0.348 (8.84)
MECHANICAL DATA
0.180 (4.6)
0.308 (7.82)
Case: Molded plastic body over passivated junctions
Terminals: Plated leads solderable per MIL-STD-750,
Method 2026
Mounting Position: Any
Weight: 0.04 ounce, 1.1 grams
0.220 (5.6)
0.180 (4.6)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS
B40
C1000G
B80
C1000G
B125
C1000G
B250
C1000G
B380
C1000G
UNITS
Maximum repetitive peak reverse voltage
VRRM
65
125
200
400
600
Volts
Maximum RMS input voltage R + C-load
VRMS
40
80
125
250
380
Volts
Maximum DC blocking voltage
VDC
65
125
200
400
600
Volts
Maximum peak working voltage
VRWM
90
180
300
600
900
Volts
Maximum non-repetitive peak voltage
VRSM
100
200
350
600
1000
Volts
Maximum repetitive peak forward surge current
IFRM
10.0
Amps
Maximum average forward output current for
free air operation at TA=45°C R + L-Load
C-Load
I(AV)
1.2
1.0
Amps
Peak forward surge current single sine wave on
rated load (JEDEC Method)
IFSM
45.0
Amps
I2t
10.0
A2sec
Rating for fusing at
TJ=125°C (t<8.3ms)
Minimum series resistor C-load at VRMS = ±10%
RT
1.0
2.0
4.0
8.0
12.0
Ohms
Maximum load capacitance +50%
-10%
CL
5000
2500
1000
500
200
µF
Maximum instantaneous forward voltage drop per leg at 1.0A
VF
1.0
Volts
Maximum reverse current at rated repetitive
peak voltage per leg
IR
10.0
µA
RΘJA
RΘJL
36.0
11.0
°C/W
TJ
-40 to +125
°C
TSTG
-40 to +150
°C
Typical thermal resistance (NOTE 1)
Operating junction temperature range
Storage temperature range
TA=25°C
NOTE:
(1) Thermal resistance from junction to ambient and from junction to lead mounted on P.C.B. at 0.375" (9.5mm) lead lengths with 0.2 x 0.2" (5.5 x 5.5mm) copper pads
4/98
RATINGS AND CHARACTERISTICS CURVES B40C1000G THRU B380C1000G
BRIDGE OUTPUT FULL WAVE
RECTIFIED CURRENT AVERAGE,
AMPERES
1.2
AVERAGE FORWARD OUTPUT CURRENT,
AMPERES
FIG.1 - DERATING CURVE
OUTPUT RECTIFIED CURRENT
B40C1000G...B125C1000G
50 to 60Hz
RESISTIVE OR
INDUCTIVE LOAD
1.0
CAPACITIVE
0.8 LOAD
0-10µF
10-100µF
>100µF
0.6
0.4
P.C.B.
0.375”
(9.5mm)
0.2
0
20
COPPER PADS
0.22 x 0.22” (5.5 x 5.5mm)
40
60
80
100
120
140
AMBIENT TEMPERATURE, °C
40
30
20
10
4
6
10
20
0.8 CAPACITIVE
0-10µF
10-100µF
>100µF
LOAD
0.6
0.4 0.375”
P.C.B.
(9.5mm)
0.2
0
20
COPPER PADS
0.22 x 0.22” (5.5 x 5.5mm)
40
60
80
100
120
140
40
60
100
NUMBERS OF CYCLES AT 50 HZ
20
INSTANTANEOUS FORWARD CURRENT, AMPERES
INSTANTANEOUS REVERSE CURRENT,
MICROAMPERES
TJ=125°C
10mS SINGLE SINE-WAVE
2
50 to 60Hz
RESISTIVE OR
INDUCTIVE LOAD
1.0
FIG. 4 - TYPICAL FORWARD CHARACTERISTICS
PER LEG
50
1
1.2
AMBIENT TEMPERATURE, °C
FIG. 3 - MAXIMUM NON-REPETITIVE PEAK
FORWARD CURRENT PER LEG
0
FIG. 2 - DERATING CURVES FOR
OUTPUT RECTIFIED CURRENT
B250C1000G...B380C1000G
10
TJ=25°C
PULSE WIDTH=300µs
1% DUTY CYCLE
1
0.1
0.01
0.4
0.6
0.8
1.0
1.2
1.4
INSTANTANEOUS FORWARD VOLTAGE,
VOLTS
FIG. 5 - TYPICAL REVERSE
CHARACTERISTICS PER LEG
FIG. 6 - TYPICAL JUNCTION CAPACITANCE
PER LEG
100
JUNCTION CAPACITANCE, pF
INSTANTANEOUS REVERSE CURRENT,
MICROAMPERES
10
TJ=100°C
1
0.1
TJ=25°C
0.01
0
20
40
60
80
PERCENT OF RATED PEAK REVERSE
VOLTAGE, %
100
TJ=25°C
f=1.0 MHz
Vsig=50MVp-p
10
1
0.1
1
10
REVERSE VOLTAGE, VOLTS
100
Similar pages