DR06S/D Series 6W DC/DC CONVERTER, DIP-Package, 4:1 Wide Input Range FEATURES Efficiency up to 86% DIP Package with Industry Standard Pinout MTBF > 1M Hours Isolation Voltage 1500VDC 4:1 Wide Input Range Complies with EN55022 Class A Temperature Performance -25℃ to +71℃ CSA60950-1 Safety Approval Internal SMD Construction 3 Years Product Warranty The DR06S/D series are miniature, DIP Package, isolated 6W DC/DC converters with 1,500VDC isolation. It offers short circuit protection and allows a wide operating temperature range of –25°C to +71°C. These isolated DC/DC converters are the latest offering from a world leader in power systems technology and manufacturing ― Delta Electronics, Inc. With creative design technology and optimization of component placement, these converters possess outstanding electrical and thermal performance, as well as extremely high reliability under highly stressful operating conditions. Model List Model Number DR06S2403A DR06S2405A DR06S2412A DR06S2415A DR06D2405A DR06D2412A DR06D2415A DR06S4803A DR06S4805A DR06S4812A DR06S4815A DR06D4805A DR06D4812A DR06D4815A Input Voltage (Range) Output Voltage VDC VDC 3.3 5 12 15 ±5 ±12 ±15 3.3 5 12 15 ±5 ±12 ±15 24 (9 ~ 36) 48 (18 ~ 75) Output Current Input Current Max. Min. @Max. Load @No Load Reflected Ripple Current mA 1200 1000 500 400 ±500 ±250 ±200 1200 1000 500 400 ±500 ±250 ±200 mA 120 100 50 40 ±50 ±25 ±20 120 100 50 40 ±50 ±25 ±20 mA(typ.) 212 257 291 294 257 291 294 106 129 145 147 123 145 147 mA(typ.) mA(typ.) Max. capacitive Load uF @Max. Load 3000 20 10 680* 3000 10 Efficiency (typ.) 10 680* % 78 81 86 85 81 86 85 78 81 86 85 81 86 85 * For each output Input Characteristics Parameter Input Surge Voltage (1 sec. max.) Start-Up Voltage Under Voltage Shutdown Model 24V Input Models Min. -0.7 Typ. --- Max. 50 100 48V Input Models -0.7 --- 24V Input Models 7 8 9 48V Input Models 14 16 18 24V Input Models --- --- 8.5 48V Input Models Unit VDC --- --- 16 Reverse Polarity Input Current --- --- 0.5 A Short Circuit Input Power --- --- 2500 mW --- --- 2500 mW Internal Power Dissipation Conducted EMI DS_DR06S/D_07182012 All Models Compliance to EN 55022,class A and FCC part 15,class A E-mail: [email protected] http://www.delta.com.tw/dcdc P1 Output Characteristics Parameter Output Voltage Accuracy Output Voltage Balance Line Regulation Load Regulation Ripple & Noise (20MHz) Ripple & Noise (20MHz) Ripple & Noise (20MHz) Transient Recovery Time Transient Response Deviation Temperature Coefficient Over Load Protection Short Circuit Protection Conditions Dual Output, Balanced Loads Vin=Min. to Max. Io=10% to 100% Over Line, Load & Temp. 25% Load Step Change Foldback Min. --------------------120 Typ. ±0.5 ±0.5 ±0.2 ±0.3 50 ----250 ±3 ±0.01 250 Continuous Max. ±1.0 ±2.0 ±0.5 ±1.0 75 100 15 500 --±0.02 350 Unit % % % % mV P-P mV P-P mV rms uS % %/℃ % General Characteristics Parameter I/O Isolation Voltage (rated) I/O Isolation Resistance I/O Isolation Capacitance Switching Frequency MTBF (calculated) Safety Approvals Conditions 60 Seconds 500 VDC 100KHz, 1V Min. Typ. Max. 1500 ----1000 ------350 550 --340 --MIL-HDBK-217F@25℃, Ground Benign 1,000,000 ----UL/cUL 60950-1 recognition(CSA certificate), IEC/EN 60950-1 Unit VDC MΩ pF KHz Hours Recommended Input Fuse 24V Input Models 1500mA Slow-Blow Type 48V Input Models 750mA Slow-Blow Type Environmental Characteristics Parameter Operating Temperature Range (with Derating) Case Temperature Storage Temperature Range Humidity (non condensing) Cooling Lead Temperature (1.5mm from case for 10Sec.) Conditions Ambient Min. Max. -25 +85 --+90 -50 +125 --95 Free-Air convection --260 Unit ℃ ℃ ℃ % rel. H ℃ Output Power (%) Power Derating Curve DS_DR06S/D_07182012 E-mail: [email protected] http://www.delta.com.tw/dcdc P2 Notes 1 2 3 4 5 6 Specifications typical at Ta=+25℃, resistive load, nominal input voltage and rated output current unless otherwise noted. Transient recovery time is measured to within 1% error band for a step change in output load of 50% to 100% Ripple & Noise measurement bandwidth is 0-20MHz. These power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage these modules; however they may not meet all specifications listed. All DC/DC converters should be externally fused at the front end for protection. Specifications subject to change without notice. Mechancial Drawing 4.1 [0.16] 10.2 [0.40] Mechanical Dimensions 0.50 [0.02] 9 Bottom View 23 16 22 Dual Output -Vin 3 -Vin -Vin Common 9 No Pin 11 NC -Vout 14 +Vout +Vout 16 -Vout Common 22 +Vin +Vin 23 +Vin +Vin 11 20.3 [0.80] 3 15.22 [0.60] 2 Pin Connections Pin Single Output 2 -Vin NC: No Connection 14 2.54 [0.10] 15.24 [0.60] 31.8 [1.25] 5.08 4.5 [0.20][0.18] 2.54 [0.10] ►All dimensions in mm (inches) ►Tolerance: X.X±0.25 (X.XX±0.01) X.XX±0.13 ( X.XXX±0.005) ►Pin diameter ⇔ 0.5 ±0.05 (0.02±0.002) Physical Outline Case Size : 31.8x20.3x10.2mm (1.25x0.80x0.40 Inches) Case Material : Metal With Non-Conductive Baseplate Weight : 17.3g DS_DR06S/D_07182012 E-mail: [email protected] http://www.delta.com.tw/dcdc P3 Part Numbering System D R 06 S 24 05 A Form factor Family series Watt Number of Outputs Input Voltage Output Voltage Option Code D-DIP P-SIP S-SMD A~Z 01:1W 02:2W 03:3W 04:4W 06:6W 03:3.3V 05: 5V 12:12V 24: 24V 48:48V 03:3.3V 05: 5V 12:12V 15: 15V 24: 24V A - Std. Functions S - Single D- Dual WARRANTY Delta offers a three(3) years limited warranty. Complete warranty information is listed on our web site or is available upon request from Delta. Information furnished by Delta is believed to be accurate and reliable. However, no responsibility is assumed by Delta for its use, nor for any infringements of patents or other rights of third parties, which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Delta. Delta reserves the right to revise these specifications at any time, without notice. DS_DR06S/D_07182012 E-mail: [email protected] http://www.delta.com.tw/dcdc P4