Plastic Film Capacitors Stacked Metallized Plastic Film Chip Capacitor ECPU(A) Chip Type : Stacked dielectric and inner electrode with simple mold - less construction ■Features •Low ESR •Max. capacitance values 1.0 µF •Smallest package size in film capacitors 3225/1.0 µF •For reflow soldering •RoHS directive compliant ■Recommended Applications •Noise suppressor •Coupling ■Explanation of Part Numbers 1 2 3 4 5 6 E C P U 1 C Product code Dielectric & construction Rated voltage. 7 8 Capacitance 9 10 11 12 M A 5 Cap.tol Suffix Suffix 12 Tape width 5 8 mm 1C 16 VDC ■Specifications Category temp. range (Including temperature-rise on unit surface) - 40 ˚C to + 85 ˚C Rated voltage 16 VDC Capacitance range Capacitance tolerance 0.10 µF to 1.0 µF (E6) ± 20 % (M) Dissipation factor (tan ) tan < =1.5 % (20 ˚C, 1 kHz) Withstand voltage Between terminais : Rated volt (VDC)x175 % 1 s to 5 s Insulation resistance (IR) >1000 MΩ (20 :, 10 VDC, 60 s) C< =0.33 µF : IR= >300 MΩ · µF (20 :, 10 VDC, 60 s) C>0.33 µF : IR= Soldering conditions Reflow soldering : 240 ˚C max. and 30 sec max. at more than 220 ˚C (Temp. at cap. surface) ❈ In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage, please refer to the page of “Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage”. ■Construction ■Dimensions in mm (not to scale) Saize code L W H e g J1 2.0 1.25 1.0 0.45 > 0.6 = H1 3.2 1.6 0.8 0.65 > 1.0 = H2 3.2 1.6 1.0 0.65 > 1.0 = H3 3.2 1.6 1.4 0.65 > 1.0 = G2 3.2 2.5 1.4 0.65 > 1.0 = Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. − FC27 − Plastic Film Capacitors ■Taping Specification for Automatic Mounting Refer to the page of taping specifications. ■Rating, Dimensions & Quantity/Reel Dimensions (mm) Part No. Cap. (µF). L ECPU1C104MA5 0.10 ECPU1C154MA5 ECPU1C224MA5 W H Size Code 2.0 1.25 1.0 J1 0.15 3.2 1.6 0.8 H1 0.22 3.2 1.6 0.8 H1 ECPU1C334MA5 0.33 3.2 1.6 1.0 H2 ECPU1C474MA5 0.47 3.2 1.6 1.4 H3 ECPU1C684MA5 0.68 3.2 1.6 1.4 H3 ECPU1C105MA5 1.0 3.2 2.5 1.4 G2 Quantity 3000 2000 ■Recommened for Land Dimensions (mm) Size Code J1 H1 H2 H3 G2 Land dimensions for reflow soldering A 0.8 1.8 1.8 1.8 1.8 B 2.4 3.6 3.6 3.6 3.6 C 1.1 1.4 1.4 1.4 2.3 ❈ It is not warrantable that you can mount the capacitor without trouble under all the mounting condition when “Recommender for Land dimensions” is adopted. Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. − FC28 − ECPU (A) Type (Stacked Metallized Film) DC16V series Electrical Characteristics <Typical Data > Frequency Characteristics at 1kHz 10 10 0.10uF 0.33uF 1.0uF 5 0 -5 Capacitance change(%) Capacitance change(%) Temperature Characteristics -10 5 1.0uF 0 -5 1 Temperature(Degree C) at 1kHz 8 6 4 0.10uF 0.33uF 1.0uF 2 10 100 Frequency(kHz) 1000 10 Dissipation factor(%) 10 Dissipation factor(%) 0.10uF -10 -60 -40 -20 0 20 40 60 80 100120 140 0 8 1.0uF 6 0.33uF 4 0.10uF 2 0 -60 -40 -20 0 20 40 60 80 100 120140 1 Temperature(Degree C) 1.E+12 1.E+11 at DC 16V 0.10uF 0.33uF 1.E+10 1.0uF 1.E+09 1.E+08 1.E+07 10 100 Frequency(kHz) 1000 10000 Impedance(ohm) Insuration resistance(ohm) 0.33uF 1000 0.10uF 100 10 0.33uF 1 1.0uF 0.1 0.01 1.E+06 -60 -40 -20 0 20 40 60 80 100 120140 Temperature(Degree C) 1 10 100 1000 Frequency(kHz) 10000 ECPU (A) Type DC16V series (Stacked Metallized Film) Applicable Specifications Permissible Voltage Permissible Current 2.0 1.5 1.0 uF 0.68 uF 0.47 uF 1.0 0.33 uF 0.22 uF 0.15 uF 0.10 uF 0.068 uF 0.047 uF 0.033 uF 0.022 uF 0.018 uF 0.015 uF 0.010 uF 0.5 Effective value (Arms) Effective value (Arms) (at sine wave) 100 100 0.10 uF 0.15 uF 0.22 uF 0.33 uF 0.47 uF 1 0.68 uF 1.0 uF 0.0 10 10 0.1 10 1000 100 1000 Frequency (kHz) Frequency (kHz) Voltage Derating by Temperature Pulse Handling Capability (dv/dt) (Max 10000cycles) DC 16V Capacitance Value(uF) Code dv/dt(V/us) 0.10 104 19 1.9 0.15 154 15 2.3 0.22 224 13 2.9 0.33 334 10 3.3 0.47 474 7 3.3 0.68 684 5 3.4 1.0 105 3 3.0 20 Current(0-P ) (A) 16 DC Rated Voltage (V) Rating Voltage 12 8 4 0 -60 -40 -20 0 20 40 60 80 100 120 140 Surface Temperature of Capacitor(DegreeC) * Please consult Panasonic if your condition exceeds the above spec. *Permissible voltage graph is the case of sine waveform. When you use this product, peak voltage must not exceed DC rated voltage. *The current(0-P ) value is calculated using nominal capacitance.