Miscellaneous Accessories AS85049/96 and M85528/3 Mounting Flange, 1/4 Perimeter M85049/96-10-A Nut, Self-Locking, Clinch MIL-N-45938 Type, 2 Places D Basic Part No. Shell Size A = Primer Coat Required A M85528/3-10-01 B Basic Part No. Shell Size Numerical designation 01 indicates corrosion resistant nuts are required. Omit for alloy steel nuts. C .040 (1.0) ±.003 (.1) TABLE I Shell Size 3 6* 7 8 10 12 14 16 18 19 20 22 24 25 27 28 32 36 37 61 Thread UNJC-3B 4-40 4-40 4-40 4-40 4-40 4-40 4-40 4-40 4-40 4-40 4-40 4-40 6-32 6-32 4-40 6-32 6-32 6-32 4-40 4-40 A ±.003 .625 .469 .719 .594 .719 .812 .906 .969 1.062 .906 1.156 1.250 1.375 1.500 .969 1.562 1.750 1.938 1.187 1.437 B (.1) (15.9) (11.9) (18.3) (15.1) (18.3) (20.6) (23.0) (24.6) (27.0) (23.0) (29.4) (31.8) (34.9) (38.1) (24.6) (39.7) (44.5) (49.2) (30.1) (36.5) ±.015 .925 .766 1.016 .891 1.016 1.109 1.203 1.266 1.390 1.203 1.510 1.640 1.760 1.859 1.266 2.000 2.312 2.500 1.500 1.812 (.4) (23.5) (19.5) (25.8) (22.6) (25.8) (28.2) (30.6) (32.2) (35.3) (30.6) (38.4) (41.7) (44.7) (47.2) (32.2) (50.8) (58.7) (63.5) (38.1) (46.0) C +.010 (.3) -.000 (.0) .300 (7.6) .298 (7.6) .298 (7.6) .296 (7.5) .298 (7.6) .296 (7.5) .296 (7.5) .298 (7.6) .328 (8.3) .296 (7.5) .354 (9.0) .390 (9.9) .386 (9.8) .358 (9.1) .298 (7.6) .438 (11.1) .562 (14.3) .562 (14.3) .314 (8.0) .376 (9.6) D ±.030 .136 .136 .136 .136 .136 .136 .136 .136 .136 .136 .136 .136 .153 .153 .136 .153 .153 .153 .136 .136 (.8) (3.5) (3.5) (3.5) (3.5) (3.5) (3.5) (3.5) (3.5) (3.5) (3.5) (3.5) (3.5) (3.9) (3.9) (3.5) (3.9) (3.9) (3.9) (3.5) (3.5) * Shell Size 6 - Available in M85528/3 only. 1. For complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] 68-18