Information 13.5 m /h DC axial fans 3 40 x 20 mm – – – – – – Possible special versions: (See chapter DC fans - specials) - Speed signal - Go / NoGo alarm - PWM control input - Moisture protection DC axial fans Housing: GRP1) (PBT) Impeller: GRP1) (PA) Direction of air flow: Exhaust over struts Direction of rotation: Counterclockwise, looking towards rotor Connection: Via single wires AWG 28, TR 64 Highlights: Some models are suitable for use at high ambient temperatures Weight: 27 g – Material: DC centrifugal fans Max. -20...+70 50 000 / 20 000 52 500 0.8 6 000 -20...+70 50 000 / 20 000 52 500 4.7 1.6 8 100 -20...+60 45 000 / 17 500 47 500 Air flow Nominal voltage Voltage range VDC VDC 405 10.0 5.9 5 4.5...5.5 18 3.8 0.9 412 10.0 5.9 12 10...14 18 3.8 412 H 13.5 7.9 12 10...14 29 dB(A) Bel(A) Hours ¿ ¿ ¡ 414 10.0 5.9 24 20...28 18 3.8 1.0 6 000 -20...+70 50 000 / 20 000 52 500 414 H 13.5 7.9 24 20...26.5 29 4.7 1.7 8 100 -20...+60 45 000 / 17 500 47 500 ¿ ¡ 12 10...14 18 3.8 0.8 6 000 -20...+85 50 000 / 20 000 52 500 ¿ Model with temperature range up to +85 °C. 412-099 10.0 5.9 DC fans - specials 6 000 cfm ACmaxx / EC fans Hours m3/h Curve Life expectancy L10IPC (40 °C) see page 17 Service life L10 (60 °C) ebm-papst standard °C Type Nominal data Service life L10 (20 °C) ebm-papst standard rpm-1 Sound power level Temperature range Power consumption Watts Nominal speed Sintec sleeve bearings Ball bearings / Air flow Series 400 Sound pressure level 1) Fiberglass-reinforced plastic ted 33 Representatives Finger guards from p. 242 Tin-p la 2016-01 Air performance measured according to: ISO 5801. Installation category A, without contact protection. Noise: Total sound power level LWA ISO 103002 measured on a hemisphere with a radius of 2 m. Sound pressure level LpA measured at 1 m distance from fan axis. The values given are applicable only under the specified measuring conditions and may differ depending on the installation conditions. In the event of deviation from the standard configuration, the parameters must be checked after installation! For detailed information see http://www.ebmpapst.com/general conditions Accessories AC centrifugal fans AC axial fans Subject to change Speed signal /2 VDC mA VDC mA 2 £ 30 0 30 2 2 31 400 F £ 0.4 1 £ 30 0 30 2 2 32 400 £ 0.4 1 £ 30 0 30 2 2 33 420 J £ 0.4 2 £ 15 0 15 4 2 34 500 F £ 0.4 1 £ 30 0 30 2 2 35 600 F £ 0.4 1 £ 30 0 30 2 2 36 620 £ 0.4 2 £ 30 0 30 4 2 37 630 U £ 0.4 2 £ 30 0 30 4 2 38 600 N £ 0.4 2 £ 28 0 28 4 2 39 600 J £ 0.4 2 £ 30 0 30 4 2 41 700 F £ 0.4 2 £ 30 0 30 4 2 42 8450 £ 0.4 2 £ 28 0 28 4 2 43 8400 N £ 0.4 2 £ 28 0 28 4 2 44 8400 N VARIOFAN £ 0.4 2 £ 30 0 30 4 2 45 8300 £ 0.4 2 £ 30 0 30 4 2 46 8200 J £ 0.4 2 £ 30 0 30 4 2 47 3400 N £ 0.4 2 £ 28 0 28 4 2 48 3400 N VARIOFAN £ 0.4 2 £ 30 0 30 4 2 49 3300 N £ 0.4 2 £ 30 0 30 4 2 50 3212 J / 3214 J £ 0.4 2 £ 30 0 30 4 2 51 3218 J £ 0.4 2 £ 60 0 60 4 2 51 3250 J £ 0.4 2 £ 60 0 60 4 3 52 4412 F / 4414 F £ 0.4 2 £ 30 0 30 4 2 53 4418 F £ 0.4 2 £ 60 0 60 4 2 53 4400 FN £ 0.4 2 £ 30 0 30 4 2 55 4312 / 4314 £ 0.4 2 £ 30 0 30 4 2 56 4318 2016-01 Fan description Basic type Condition: Isource mA £ 0.4 Page £ 0.4 2 £ 60 0 60 4 2 56 4312 / 4314 VARIOFAN £ 0.4 2 £ 30 0 30 4 2 57 4318 VARIOFAN £ 0.4 2 £ 60 0 60 4 2 57 4400 £ 0.4 2 £ 30 0 30 4 2 58/59 4100 N £ 0.4 2 £ 30 0 30 4 2 60 4100 NHH...NH6 £ 0.4 2 £ 60 0 60 10 2 61 4100 NH7...NH8 £ 0.4 2 £ 60 0 60 20 3 62 DV 4100 £ 0.4 2 £ 30 0 30 4 2 63 5200 N £ 0.4 2 £ 30 0 30 4 2 64 DV 5200 £ 0.4 2 £ 30 0 30 4 2 65 Subject to change 168 Pulses per revolution Speed signal US High VDC Signal data Tach operating voltage UBS max. Condition: Isink Type 250 Electrical hookup All voltages measured to ground. External load resistor Ra / US / UBS required. Admissible sink current Isink max. Speed-proportional, square-wave signal for external monitoring of the fan motor speed 2, 3, or 6 pulses per revolution Open-collector signal output Extremely wide operating voltage range Easy adaptation to user interface Connection via separate cable The sensor signal also serves as a major comparison variable for setting and maintaining the setpoint speed for interactive or controlled cooling with one or more interconnected fans. Speed signal US Low – – – – – – – Information Tach operating voltage UBS max. Admissible sink current Isink max. VDC mA VDC mA 2 £ 15 0 5 20 2 66 5114 N / 5118 N £ 0.4 2 £ 60 0 60 20 2 66 5300 £ 0.4 2 £ 60 0 60 4 2 67 5300 TD £ 0.4 2 £ 60 0 60 20 6 68 7112 N / 7118 N £ 0.4 2 £ 60 0 60 20 2 69 7114 N £ 0.4 2 £ 30 0 30 20 2 69 7200 N £ 0.4 2 £ 15 0 15 20 2 70 6400 £ 0.4 2 £ 60 0 60 20 2 71 6300 TD £ 0.4 2 £ 60 0 60 20 6 75 6300 N £ 0.4 2 £ 60 0 60 20 6 76 6300 NTD £ 0.4 2 £ 60 0 60 20 6 77 6300 £ 0.4 2 £ 60 0 60 20 2 78 DV 6300 TD £ 0.4 2 £ 60 0 60 20 6 80 2200 FTD £ 0.4 2 £ 60 0 60 20 6 81 RL 48 £ 0.4 2 £ 30 0 30 4 2 97 RL 65 £ 0.4 2 £ 30 0 30 4 2 98 RL 90 N £ 0.4 2 £ 30 0 30 4 2 99 RLF 100 £ 0.4 2 £ 30 0 30 4 2 100 RG 90 N £ 0.4 2 £ 30 0 30 4 2 101 RG 125 N £ 0.4 2 £ 30 0 30 4 2 102 RG 140 N £ 0.4 3 £ 60 0 60 4 2 103 RG 160 N £ 0.4 2 £ 30 0 30 20 2 104 RG 160 NTD £ 0.4 2 £ 60 0 60 20 6 105 RG 190 TD £ 0.4 2 £ 60 0 60 20 6 106 RG 220 TD £ 0.4 2 £ 60 0 60 20 6 107 RG 225 TD £ 0.4 2 £ 60 0 60 20 6 108 RET 97 TD £ 0.4 2 £ 60 0 60 20 6 109 REF 100 £ 0.4 2 £ 30 0 30 4 2 110 RER 120 TD £ 0.4 2 £ 60 0 60 20 6 112 RER 133 TD £ 0.4 2 £ 60 0 60 20 6 117 RER 160 NTD £ 0.4 2 £ 60 0 60 20 6 119 REF 175 TD £ 0.4 2 £ 60 0 60 20 6 120 RER 175 TD £ 0.4 2 £ 60 0 60 20 6 121 RER 190 TD £ 0.4 2 £ 60 0 60 20 6 122 RER 220 TD £ 0.4 2 £ 60 0 60 20 6 128 RER 225 TD £ 0.4 2 £ 60 0 60 20 6 129 Accessories AC centrifugal fans AC axial fans ACmaxx / EC fans DC fans - specials Page Note: Fans that come with these fan specials could have variations with respect to the temperature range, voltage range, and power consumption compared to standard fans without specials. 169 2016-01 Subject to change DC centrifugal fans Condition: Isource mA £ 0.4 Representatives Speed signal US High VDC Fan description Basic type Condition: Isink Type 5112 N Signal data Pulses per revolution Speed signal US Low DC axial fans Available on request: – Electrically isolated speed signal circuit – Varying voltage potentials for power and logic circuit