1010 POWER INDUCTORS Outgassing Compliant Power Inductors AE611PYA ■ High temperature materials allow operation in ambient temperatures up to 155°C ■ Passes NASA low outgassing specifications ■ Tin-lead (Sn-Pb) termination for the best possible board adhesion ■ High current and very low DCR ■ Soft saturation makes them ideal for VRM/VRD applications. Core material Composite Terminations Tin-lead (63/37) over copper. Weight 5.7 – 6.3 g Ambient temperature –55°C to +105°C with Irms current, +105°C to +155°C with derated current Storage temperature Component: –55°C to +155°C. Tape and reel packaging: –55°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Enhanced crush-resistant packaging 300/13″ reel Plastic tape: 24 mm wide, 0.4 mm thick, 16 mm pocket spacing, 10.21 mm pocket depth Part number1 AE611PYA221MSZ AE611PYA451MSZ AE611PYA681MSZ AE611PYA102MSZ AE611PYA152MSZ AE611PYA222MSZ AE611PYA332MSZ AE611PYA472MSZ AE611PYA562MSZ AE611PYA682MSZ ML611PYA822MSZ ML611PYA103MSZ ML611PYA153MSZ Inductance2 ±20% (µH) 0.22 0.45 0.68 1.0 1.5 2.2 3.3 4.7 5.6 6.8 8.2 10 15 DCR (mOhms)3 typ max 0.45 0.50 0.65 0.72 0.87 0.96 1.00 1.10 1.60 1.76 2.55 2.80 3.70 4.10 5.20 5.70 6.30 6.93 8.10 8.90 11.70 12.90 13.40 14.75 16.90 18.60 SRF (MHz)4 min typ 92 115 53 66 42 53 34 42 26 33 18 22 17 21 15 19 13 16 11 14 9 12 8 11 7 9 1. When ordering, please specify testing code: AE611PYA682MSZ Testing: Z = COTS H = Screening per Coilcraft CP-SA-10001 N = Screening per Coilcraft CP-SA-10004 2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using an Agilent/HP 4395A or equivalent. 5. Typical dc current at which the inductance drops 30% from its value without current. 6. Typical current that causes the specified temperature rise from 25°C ambient. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Irms (A)6 20°C rise 40°C rise 30.8 41.6 30.0 39.8 28.5 37.5 24.0 32.6 23.3 30.4 18.4 24.0 13.7 18.8 13.1 18.0 11.8 15.9 10.5 13.9 9.7 12.8 8.6 11.6 7.4 10.4 Irms Testing Irms testing was performed on a 0.060″ thick pcb with 4 oz. copper traces optimized to minimize additional temperature rise. Temperature rise is highly dependent on many factors including pcb land pattern, trace size, and proximity to other components. Therefore temperature rise should be verified in application conditions. Document AE804-1 Revised 02/20/13 ® © Coilcraft, Inc. 2013 Isat (A)5 98.8 70.5 62.0 55.0 36.6 34.0 27.4 25.4 23.6 21.8 18.3 17.5 15.5 1102 Silver Lake Road Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email [email protected] www.coilcraft-cps.com This product may not be used in medical or high risk applications without prior Coilcraft approval. Specifications subject to change without notice. Please check our web site for latest information. 1010 POWER INDUCTORS AE611PYA Series (1010) Inductance (µH) 0.4 0.3 0.22 µH 0.2 0.1 0 0 10 20 30 40 50 60 70 Current (A) 80 90 100 Inductance (µH) 0.6 0.5 0.4 0.45 µH 0.3 0.2 0.1 0 0 10 20 30 40 50 60 Current (A) 70 80 90 Inductance (µH) 1.2 1.0 0.8 0.6 0.68 µH 0.4 0.2 0 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0 10 20 30 40 Current (A) 50 60 70 80 Inductance (µH) Inductance (µH) Inductance (µH) Inductance (µH) Inductance (µH) Typical L vs Current 1.0 µH 0 10 20 30 40 Current (A) 50 60 70 80 2.0 1.6 1.5 µH 1.2 0.8 0.4 0 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 0 10 20 40 50 60 40 50 60 2.2 µH 0 10 20 30 Current (A) 5 4 3 3.3 µH 2 1 0 0 5 10 15 20 25 30 35 40 45 50 30 35 40 45 50 Current (A) 6 5 4 4.7 µH 3 2 1 0 0 5 10 15 20 25 Current (A) Document AE804-2 Revised 02/20/13 ® © Coilcraft, Inc. 2013 30 Current (A) 1102 Silver Lake Road Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email [email protected] www.coilcraft-cps.com This product may not be used in medical or high risk applications without prior Coilcraft approval. Specifications subject to change without notice. Please check our web site for latest information. 1010 POWER INDUCTORS AE611PYA Series (1010) Inductance (µH) Inductance (µH) 10 8 6 5.6 µH 4 2 0 0 5 10 15 Current (A) 20 25 30 10 Inductance (µH) Inductance (µH) Inductance (µH) Typical L vs Current 8 6.8 µH 6 4 2 0 0 5 10 15 Current (A) 20 25 30 16 12 8 10 µH 4 0 0 2 4 6 8 10 12 14 16 18 20 12 14 16 18 20 Current (A) 20 16 12 15 µH 8 4 0 0 2 4 6 8 10 Current (A) 12 10 8 8.2 µH 6 4 2 0 0 2 4 6 8 10 12 Current (A) 14 16 18 20 Document AE804-3 Revised 02/20/13 ® © Coilcraft, Inc. 2013 1102 Silver Lake Road Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email [email protected] www.coilcraft-cps.com This product may not be used in medical or high risk applications without prior Coilcraft approval. Specifications subject to change without notice. Please check our web site for latest information. 1010 POWER INDUCTORS AE611PYA Series (1010) Typical L vs Frequency Inductance (µH) 100 15 µH 10 µH 6.8 µH 4.7 µH 10 2.2 µH 1.5 µH 1.0 µH 1 0.45 µH 0.22 µH 0.1 0.1 10 1 100 Frequency (MHz) Irms Derating 120 110 90 80 70 60 Dimensions are in 50 40 inches mm 25°C Percent of rated Irms 100 30 20 10 0 -55 -40 -20 0 20 40 60 80 100 120 140 160 Ambient temperature (°C) Document AE804-4 Revised 02/20/13 ® © Coilcraft, Inc. 2013 1102 Silver Lake Road Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email [email protected] www.coilcraft-cps.com This product may not be used in medical or high risk applications without prior Coilcraft approval. Specifications subject to change without notice. Please check our web site for latest information.