IPT SE Series Bayonet Lock Connectors IPT 01 SE...SR In-Line Receptacle Connector with Backshell, Cable Clamp and Bushing IPT 01 SE 18-11 S Z SR XX MIL-C-26482 Series l Type Mod Code Options See Table II 01 - In-Line Receptacle Cable Clamp and Bushing Alternate Insert Rotation (W, X, Y, Z) Omit for Normal Connector Class SE - Crimp Contact/Environmental Contact Gender P - Pin S - Socket Shell Size and Insert Arrangements N D3 D1 H 3 Max. L1 G APPLICATION NOTES 1. In-line receptacle with sealing grommet, cable clamp and bushing for cable protection. 2. Connector Class “SE” (crimp contact/environmental)––Wire sealing grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber. © 2008 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] A-40 www.glenair.com IPT SE Series Bayonet Lock Connectors IPT 01 SE...SR In-Line Receptacle Connector with Backshell, Cable Clamp and Bushing TABLE I: DIMENSIONS Shell size N Thread D1 Max. D3 + 0.3 - 0.7 L1 Max. Maximum Weight in Grams G ± 0.1 8 6-32 15.44 3.2 45.1 17.3 20 10 6-32 18.64 4.8 45.1 21.8 22 12 6-32 21.79 7.9 45.1 25.1 29 14 6-32 25.00 9.5 45.1 28.6 40 16 6-32 28.19 12.7 48.4 30.6 51 18 8-32 31.34 15.9 48.4 33.2 62 20 8-32 34.54 15.9 54.8 36.5 70 22 8-32 37.69 19.1 54.8 39.6 75 24 8-32 40.89 20.3 56.4 43.1 87 TABLE II: MODIFICATION CODES Shell Finish (Omit for Standard Cad/Olive Drab Finish) Assembly with Accessories (Omit for Standard Version) F2 - Bright Nickel Plating (RoHs) Key Polarization (Omit for N version) W, X, Y, Z = Alternates F6 - Black Electrodeposited Paint (RoHs) N0 - Connector Less Backshell F7 - Black Zn-Co Plating (RoHs) GXXX - Custom Designed Connector F8 - Olive Drab Zn-Co Plating STANDARD FINISHES (For QQ-A-591 Aluminum Shells) Requirements IAW RoHS Not IAW RoHS G3 Cadmium with Olive F8 Zinc Cobalt with F2 Electrolytic Nickel F6 Black Non Conductive F7 Black Conductive Drab Passivation Olive Drab Passivation Thermal Shock -40°C + 100°C -55°C + 125°C -55°C + 125°C -55°C + 125°C -40°C + 100°C Salt Spray After Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour Electical Conductivity Very Good NO Very Good Very Good Good Abrasion Resistance Very Good Very Good Good Very Good Good © 2008 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] A-41 www.glenair.com