BSP297 Rev. 1.0 SIPMOS Ò Small-Signal-Transistor Feature Product Summary · N-Channel VDS 200 V RDS(on) 1.8 W ID 0.66 A · Enhancement mode · Logic Level · dv/dt rated SOT-223 4 3 2 1 VPS05163 Type Package Ordering Code Tape and Reel Information Marking BSP297 SOT-223 Q67000-S068 E6327: 3000 pcs/reel BSP297 Maximum Ratings, at Tj = 25 °C, unless otherwise specified Parameter Symbol Continuous drain current Value A ID TA=25°C 0.66 TA=70°C 0.53 Pulsed drain current Unit ID puls 2.64 dv/dt 6 VGS ±20 TA=25°C Reverse diode dv/dt kV/µs IS=0.66A, V DS=160V, di/dt=200A/µs, Tjmax=150°C Gate source voltage ESD Sensitivity (HBM) as per MIL-STD 883 Power dissipation V Class 1 Ptot 1.8 W -55... +150 °C TA=25°C Operating and storage temperature Tj , Tstg IEC climatic category; DIN IEC 68-1 55/150/56 Page 1 2002-11-04 BSP297 Rev. 1.0 Thermal Characteristics Parameter Symbol Values Unit min. typ. max. - 15 25 @ min. footprint - 80 115 @ 6 cm2 cooling area 1) - 48 70 Characteristics Thermal resistance, junction - soldering point RthJS K/W (Pin 4) SMD version, device on PCB: RthJA Electrical Characteristics, at Tj = 25 °C, unless otherwise specified Parameter Symbol Values Unit min. typ. max. V(BR)DSS 200 - - VGS(th) 0.8 1.4 1.8 Static Characteristics Drain-source breakdown voltage V V GS=0, ID=250µA Gate threshold voltage, VGS = VDS ID=400µA Zero gate voltage drain current µA IDSS V DS=200V, VGS=0, Tj=25°C - - 0.1 V DS=200V, VGS=0, Tj=150°C - 10 100 IGSS - 1 10 nA RDS(on) - 1.2 3 W RDS(on) - 1 1.8 Gate-source leakage current V GS=20V, VDS=0 Drain-source on-state resistance V GS=4.5V, ID=0.53A Drain-source on-state resistance V GS=10V, ID=0.66A 1Device on 40mm*40mm*1.5mm epoxy PCB FR4 with 6cm² (one layer, 70 µm thick) copper area for drain connection. PCB is vertical without blown air. Page 2 2002-11-04 BSP297 Rev. 1.0 Electrical Characteristics, at Tj = 25 °C, unless otherwise specified Parameter Symbol Conditions Values Unit min. typ. max. 0.47 0.94 - S pF Dynamic Characteristics Transconductance g fs V DS³2*I D*RDS(on)max, ID=0.53A Input capacitance Ciss V GS=0, VDS=25V, - 286 357 Output capacitance Coss f=1MHz - 38 47 Reverse transfer capacitance Crss - 15.7 23.5 Turn-on delay time td(on) V DD=100V, V GS=4.5V, - 5.2 7.8 Rise time tr ID=0.6A, RG=15W - 3.8 5.7 Turn-off delay time td(off) - 49 74 Fall time tf - 19 29 - 0.7 0.9 - 5.2 7.8 - 12.9 16.1 V(plateau) V DD=160V, ID = 0.66 A - 2.7 3.3 V IS - - 0.66 A - - 2.64 ns Gate Charge Characteristics Gate to source charge Q gs Gate to drain charge Q gd Gate charge total Qg V DD=160V, ID=0.66A V DD=160V, ID=0.66A, nC V GS=0 to 10V Gate plateau voltage Reverse Diode Inverse diode continuous TA=25°C forward current Inv. diode direct current, pulsed ISM Inverse diode forward voltage VSD V GS=0, IF = I S - 0.84 1.2 V Reverse recovery time trr V R=100V, IF=lS, - 52 78 ns Reverse recovery charge Qrr diF/dt=100A/µs - 80 120 nC Page 3 2002-11-04 BSP297 Rev. 1.0 1 Power dissipation 2 Drain current Ptot = f (TA) ID = f (TA) parameter: V GS³ 10 V 1.9 BSP297 0.75 BSP297 A W 1.6 0.6 0.55 0.5 1.2 ID Ptot 1.4 0.45 0.4 1 0.35 0.8 0.3 0.25 0.6 0.2 0.4 0.15 0.1 0.2 0.05 0 0 20 40 60 80 100 120 °C 0 0 160 20 40 60 80 100 120 °C TA 3 Safe operating area 4 Transient thermal impedance ID = f ( V DS ) ZthJA = f (tp) parameter : D = 0 , TA = 25 °C parameter : D = t p/T 1 BSP297 10 2 A 10 0 on ) VD S 10 1 1 ms ID R ( DS = K/W tp = 100.0µs /I D BSP297 ZthJA 10 160 TA 10 ms 10 -1 10 0 D = 0.50 0.20 0.10 10 -2 10 -1 DC 0.05 single pulse 0.02 0.01 10 -3 0 10 10 1 10 2 V 10 3 VDS 10 -2 -5 -4 -3 -2 -1 0 1 2 10 10 10 10 10 10 10 10 s 10 tp Page 4 2002-11-04 4 BSP297 Rev. 1.0 5 Typ. output characteristic 6 Typ. drain-source on resistance ID = f (VDS) RDS(on) = f (ID) parameter: Tj = 25 °C, VGS parameter: Tj = 25 °C, VGS 1.3 4.5 3.4V 3.8V 4V 1.1 4.6V 1 5V 6V 0.9 10V 0.8 RDS(on) ID A 2.8V 2.6V W 2.8V 3.4V 3.8V 3.5 4V 4.6V 5V 3 6V 10V 2.5 0.7 0.6 2.6V 2 0.5 1.5 0.4 0.3 1 0.2 0.5 0.1 0 0 0.4 0.8 1.2 1.6 V 0 0 2.2 0.2 0.4 0.6 0.8 1 VDS 8 Typ. forward transconductance ID= f ( VGS ); VDS³ 2 x ID x RDS(on)max g fs = f(ID) parameter: Tj = 25 °C parameter: Tj = 25 °C 1.3 1.4 A S 1.1 1.2 1 1.1 0.9 1 g fs ID 1.3 ID 7 Typ. transfer characteristics 0.8 0.9 0.8 0.7 0.7 0.6 0.6 0.5 0.5 0.4 0.4 0.3 0.3 0.2 0.2 0.1 0.1 0 0 A 0.5 1 1.5 2 2.5 V 3.5 VGS 0 0 0.2 0.4 0.6 0.8 1 A 1.3 ID Page 5 2002-11-04 BSP297 Rev. 1.0 9 Drain-source on-state resistance 10 Typ. gate threshold voltage RDS(on) = f (Tj) VGS(th) = f (Tj) parameter : ID = 0.66 A, VGS = 10 V parameter: V GS = VDS; ID =400µA 8.5 BSP297 2.2 W V 98% 1.8 VGS(th) RDS(on) 7 6 5 1.6 typ. 1.4 1.2 4 1 3 0.8 98% 2% 0.6 2 0.4 typ 1 0 -60 -20 20 60 0.2 100 °C 0 -60 180 -20 20 60 100 Tj °C 160 Tj 11 Typ. capacitances 12 Forward character. of reverse diode C = f (VDS) IF = f (VSD) parameter: V GS=0, f=1 MHz, Tj = 25 °C parameter: Tj 10 3 10 1 BSP297 A Ciss pF C IF 10 0 10 2 Coss 10 -1 Tj = 25 °C typ Crss Tj = 150 °C typ Tj = 25 °C (98%) Tj = 150 °C (98%) 10 1 0 5 10 15 20 V 30 VDS 10 -2 0 0.4 0.8 1.2 1.6 2 2.4 V 3 VSD Page 6 2002-11-04 BSP297 Rev. 1.0 13 Typ. gate charge 14 Drain-source breakdown voltage VGS = f (QG ); parameter: VDS , V(BR)DSS = f (Tj) ID = 0.66 A pulsed, Tj = 25 °C 16 BSP297 245 BSP297 V V V(BR)DSS 235 VGS 12 10 230 225 220 215 8 0.2 VDS max 210 0.5 VDS max 205 6 0.8 V DS max 200 4 195 190 2 185 0 0 2 4 6 8 10 12 14 16 nC 180 -60 20 QG -20 20 60 100 °C 180 Tj Page 7 2002-11-04 BSP297 Rev. 1.0 Published by Infineon Technologies AG, Bereichs Kommunikation St.-Martin-Strasse 53, D-81541 München © Infineon Technologies AG 1999 All Rights Reserved. Attention please! The information herein is given to describe certain components and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Infineon Technologies is an approved CECC manufacturer. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Reprensatives worldwide (see address list). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Page 8 2002-11-04