Aluminum Electrolytic Capacitors (Radial Lead Type) Radial Lead Type Series : TA Type : A Features ● Endurance: 125 °C 2000 h cycle: 1000 cycle –40 °C to +125 °C ● RoHS compliant ● Heat Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current –40 °C to + 125 °C 10 V .DC to 63 V .DC 2.2 µF to 4700 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater) V.DC 10 16 25 35 50 63 (120Hz / +20 °C) tan d 0.20 0.16 0.14 0.12 0.10 0.09 For capacitance value > 1000 µF , add 0.02 per every 1000 µF. After following life test with DC voltage and +125 °C±2 °C ripple current value applied (The sum of DC and ripple peak voltage shall not exceed the rated working voltage), for 2000 hours, when the capacitors are restored to 20 °C, the capacitors, shall meet the limits specified below. Capacitance change Within ±30 % of the initial value tan d < 300 % of the initial limit DC leakage current Within the initial limit Dissipation factor (tan d) Endurance Shelf life After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) AEC-Q200 AEC-Q200 compliant Frequency correction factor for ripple current Rated voltage (V.DC) Frequency (Hz) Capacitance (µF) 10 to 63 60 120 1k 10 k 100 k 1 to 330 0.55 0.65 0.85 0.90 1.00 470 to 1000 0.70 0.75 0.90 0.95 1.00 2200 to 4700 0.75 0.80 0.90 0.95 1.00 Sleeve fd±0.05 Dimensions 010 < 08 + Pressure relief L✽ 14 min. 3 min. 0D±0.5 F±0.5 – 0D±0.5 ✽ L < 16 : L±1.0 (016×15, 018×15 : L±1.5) L > 20 : L±2.0 (Unit : mm) 0D 8 10 12.5 16 18 0d 0.6 0.6 0.6 0.8 0.8 F 3.5 5.0 5.0 7.5 7.5 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04 Mar. 2016 Aluminum Electrolytic Capacitors (Radial Lead Type) Characteristics list Endurance : 125 °C 2000 h Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 330 470 1000 10 2200 3300 4700 220 330 470 1000 16 2200 3300 4700 100 220 330 470 25 1000 2200 3300 100 220 330 35 470 1000 2200 0D L 8 10 10 12.5 12.5 16 18 16 18 16 18 8 10 10 12.5 16 16 18 16 18 18 8 10 10 10 12.5 12.5 16 18 16 18 18 10 10 10 12.5 16 16 18 18 11.5 12.5 20 15 25 20 15 25 20 31.5 25 11.5 12.5 16 20 15 25 20 31.5 25 31.5 11.5 12.5 16 20 15 25 20 15 31.5 25 35.5 12.5 16 20 20 15 25 20 35.5 Specification Ripple Impedance current (100 kHz) (100 kHz) (+20 °C) (+125 °C) (Ω) (mA r.m.s.) 500 0.130 680 0.100 1100 0.057 1085 0.070 1750 0.033 1985 0.032 1800 0.042 2300 0.024 2250 0.031 2710 0.020 2470 0.022 500 0.130 680 0.100 945 0.075 1490 0.042 1520 0.047 2300 0.024 2250 0.031 2710 0.020 2470 0.022 3270 0.018 500 0.130 680 0.100 945 0.075 1100 0.057 1085 0.070 1750 0.033 1985 0.032 1800 0.042 2710 0.020 2470 0.022 3310 0.017 555 0.180 765 0.130 930 0.100 1330 0.070 1450 0.088 2010 0.037 2180 0.046 2790 0.025 Lead length (mm) Min. Packaging Q'ty Lead space Lead dia. 0d 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 Part No. Taping Straight ✽B 3.5 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 7.5 3.5 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 7.5 3.5 5.0 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 7.5 7.5 7.5 5.0 5.0 5.0 5.0 7.5 7.5 7.5 EEUTA1A331( ) EEUTA1A471( ) EEUTA1A102( ) EEUTA1A102S( ) EEUTA1A222L( ) EEUTA1A222( ) EEUTA1A222S( ) EEUTA1A332( ) EEUTA1A332S( ) EEUTA1A472 EEUTA1A472S( ) EEUTA1C221( ) EEUTA1C331( ) EEUTA1C471( ) EEUTA1C102( ) EEUTA1C102S( ) EEUTA1C222( ) EEUTA1C222S( ) EEUTA1C332 EEUTA1C332S( ) EEUTA1C472 EEUTA1E101( ) EEUTA1E221( ) EEUTA1E331( ) EEUTA1E471( ) EEUTA1E471S( ) EEUTA1E102L( ) EEUTA1E102( ) EEUTA1E102S( ) EEUTA1E222 EEUTA1E222S( ) EEUTA1E332 EEUTA1V101( ) EEUTA1V221( ) EEUTA1V331( ) EEUTA1V471( ) EEUTA1V471S( ) EEUTA1V102( ) EEUTA1V102S( ) EEUTA1V222 Straight Taping leads (pcs) (pcs) 200 200 200 200 200 100 100 100 100 100 100 200 200 200 200 100 100 100 100 100 50 200 200 200 200 200 200 100 100 100 100 50 200 200 200 200 100 100 100 50 1000 500 500 500 500 250 250 250 250 250 1000 500 500 500 250 250 250 250 1000 500 500 500 500 500 250 250 250 500 500 500 500 250 250 250 · When requesting taped product, please put the letter "B" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm. · Please refer to the page of “Taping dimensions”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04 Mar. 2016 Aluminum Electrolytic Capacitors (Radial Lead Type) Characteristics list Endurance : 125 °C 2000 h Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 10 22 33 47 100 220 50 330 470 1000 22 33 47 100 63 220 330 470 0D L 8 8 8 8 10 10 12.5 16 12.5 16 18 16 18 8 10 10 10 12.5 16 18 16 18 16 18 11.5 11.5 11.5 11.5 12.5 20 20 15 25 20 15 31.5 25 11.5 12.5 16 20 25 20 15 25 20 31.5 25 Specification Ripple Impedance current (100 kHz) (100 kHz) (+20 °C) (+125 °C) (Ω) (mA r.m.s.) 180 0.950 250 0.650 300 0.450 440 0.350 555 0.180 930 0.100 1330 0.070 1450 0.088 1650 0.055 1650 0.053 1710 0.075 2430 0.031 2350 0.032 310 0.470 410 0.360 460 0.270 680 0.205 1325 0.100 1360 0.085 1300 0.120 1660 0.070 1760 0.077 2055 0.060 1990 0.060 Lead length (mm) Min. Packaging Q'ty Lead space Lead dia. 0d 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.6 0.8 0.8 0.8 0.8 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 Part No. Taping Straight ✽B 3.5 3.5 3.5 3.5 5.0 5.0 5.0 7.5 5.0 7.5 7.5 7.5 7.5 3.5 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 EEUTA1H100( ) EEUTA1H220( ) EEUTA1H330( ) EEUTA1H470S( ) EEUTA1H101( ) EEUTA1H221( ) EEUTA1H331( ) EEUTA1H331S( ) EEUTA1H471L( ) EEUTA1H471( ) EEUTA1H471S( ) EEUTA1H102 EEUTA1H102S( ) EEUTA1J220( ) EEUTA1J330( ) EEUTA1J470( ) EEUTA1J101( ) EEUTA1J221L( ) EEUTA1J221( ) EEUTA1J221S( ) EEUTA1J331( ) EEUTA1J331S( ) EEUTA1J471 EEUTA1J471S( ) Straight Taping leads (pcs) (pcs) 200 200 200 200 200 200 200 100 200 100 100 100 100 200 200 200 200 200 100 100 100 100 100 100 1000 1000 1000 1000 500 500 500 250 500 250 250 250 1000 500 500 500 500 250 250 250 250 250 · When requesting taped product, please put the letter "B" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm. · Please refer to the page of “Taping dimensions”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04 Mar. 2016