1 D Description Body Socket Insulation O Ring Crimp Ring Washer Nut 2 Material Brass Brass Teflon Si Rubber Brass Brass Brass Finish Nickel Gold Teflon Rubber Nickel Nickel Nickel 3 4 SOCKET RECOMMENDED MOUNTING HOLE PIN CHUCK 0.2x2x2 GROOVE Ø0.256 (6.50) CRIMP RING Ø0.020 (0.50) Ø0.154 (3.90) Ø0.024 Ø0.049 (0.60) (1.24) 0.354 (9.00) D 0.374 (9.50) 0.236 (6.00) SIDE VIEW C FLAT 0.228 (5.80) 1/4"-36UNS-2A THREADS C H0.433 (11.00) Ø0.102 (2.60) Ø0.236 (6.00) WASHER BACK VIEW H0.315 (8.00) B 0.083 (2.10) FLAT 0.228 (5.80) 0.248 (6.30) RECOMMENDED CABLE STRIPPING DIMENSIONS 0.138 (3.50) 0.177 (4.50) B 0.065 (1.65) 0.020 (0.50) 0.433 (11.00) 0.748 (19.00) 0.098 (2.50) 1/4-36UNS-2B THREADS Ø0.402 (10.20) 0.197 (5.00) 0.417 (10.60) NUT CONSMA014 ASSEMBLY INSTRUCTIONS 1. 2. 3. RG-174 Cable Solder the socket to the center conductor. Insert the socket, center conductor, and insulation into the body. Wrap the braid around the tail of the body and crimp the ring with a 0.137" hex crimp tool (or one labeled for use with RG-174 cable). A A Title SMA FEMALE BULKHEAD MOUNT CABLE END CRIMP WITH O-RING FOR RG174 CABLE Part No. Dimensions: 1 2 CONSMA014 INCHES (mm) Revision: 1.0 Date: 6/2/2006 3 CONNECTOR CITY 159 ORT LANE MERLIN, OR 97532 PH (541)-471-6256 FAX (541)-471-6251 Sheet 1 of 1 4