APD240 SCHOTTKY BARRIER RECTIFIERS Product Summary VRRM (V) IO (A) 40 2 Features VF (MAX) (V) IR (MAX) (mA) Low Forward Voltage: 0.5V @ +25C @ +25°C @ +25°C High Surge Current Capacity +125C Operating Junction Temperature 2A Total Guard-Ring for Stress Protection Pb-free Package is Available 0.5 0.5 Description The APD240 is a low voltage dual Schottky rectifier suited for switch mode power supplies and other power converters. This device is intended for use in medium voltage operation, and particularly, in high frequency circuits where low switching losses and low noise are required The APD240 is available in standard DO-214AC, DO-41, DO-15 and SOD-123 packages. Applications DO-41, DO-15 Lead-Free Finish; RoHS Compliant (Notes 1 & 2) Available in “Green” Packages: DO-41, DO-15, DO-214AC, SOD123 Lead-Free Finish; RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. “Green” Device (Note 3) Mechanical Data Case: DO-41, DO-15, DO-214AC, SOD-123 Case Material: Molded Plastic, “Green” Molding Compound. UL Flammability Classification Rating 94V-0 Low Voltage High Frequency Inverters DC-DC Converters Moisture Sensitivity: Level 1 per J-STD-020 Free Wheeling Polarity Protection Terminals: Finish - Matte Tin Annealed over Copper Leadframe. Solderable per MIL-STD-202, Method 208 Weight DO-41 Notes: DO-41 – 0.33Grams (Approximately) DO-15 – 0.39Grams (Approximately) DO-214AC – 0.062Grams (Approximately) SOD-123 – 0.016Grams (Approximately) DO-15 DO-214AC SOD-123 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. APD240 Document number: DS36971 Rev. 2 - 2 1 of 12 www.diodes.com June 2014 © Diodes Incorporated APD240 Pin Assignments (Top View) (Top View) Cathode line by marking Cathode line by marking Anode Cathode Anode Cathode DO-41 / DO-15 DO-214AC (Top View) Cathode line by marking Anode Cathode SOD-123 Ordering Information (Note 4) APD240 XX XX - XX Product Name Note 4: Package Packing E1/G1 VD: DO-41 VG: DO-15 VR: DO-214AC KD: SOD-123 Blank: Bulk TR: Tape & Reel or Ammo E1 : RoHS Compliant G1: Green Diodes IC's Pb-free products, as designated with "E1" suffix in the part number, are RoHS compliant. Products with "G1" suffix are available in green packages. Pb Green Pb Package Temperature Range Part Number Marking ID Packing DO-41 -65 to +125oC APD240VD-E1 D240VD 1000/Bulk DO-41 -65 to +125oC APD240VD-G1 240VDG 1000/Bulk DO-41 -65 to +125oC APD240VDTR-E1 D240VD 2500/Ammo DO-41 -65 to +125oC APD240VDTR-G1 240VDG 2500/Ammo DO-15 -65 to +125oC APD240VG-E1 D240VG 500/Bulk DO-15 -65 to +125oC APD240VG-G1 240VGG 500/Bulk DO-15 -65 to +125oC APD240VGTR-E1 D240VG 1500/Ammo DO-15 -65 to +125oC APD240VGTR-G1 240VGG 1500/Ammo Green Pb Green Pb Green APD240 Document number: DS36971 Rev. 2 - 2 2 of 12 www.diodes.com June 2014 © Diodes Incorporated APD240 Ordering Information (Cont. Note 4) Package Temperature Range Part Number Marking ID Packing DO-214AC -65 to +125oC APD240VRTR-G1 240VRG 7500/Tape & Reel SOD-123 -65 to +125oC APD240KDTR-G1 G11 3000/Tape & Reel Green Green Marking Information (1) DO-41/DO-15 (Top View) YWWA XXXXXX First Line: Logo and Date Code Y: Year WW: Work Week of Molding A: Assembly House Code Second Line: Marking ID (See Ordering Information) (2) DO-214AC (Top View) YWWA XXXXXX APD240 Document number: DS36971 Rev. 2 - 2 First Line: Logo and Date Code Y: Year WW: Work Week of Molding A: Assembly House Code Second Line: Marking ID (See Ordering Information) 3 of 12 www.diodes.com June 2014 © Diodes Incorporated APD240 Marking Information (Cont.) (3) SOD-123 (Top View) First Line: Logo and Marking ID (See Ordering Information) XXX Maximum Ratings (TA = +25oC, unless otherwise noted.) (Note 5) Characteristic Symbol Rating Unit VRRM 40 V Maximum DC Blocking Voltage VDC 40 V Maximum RMS Voltage VRMS 28 V Average Rectified Forward Current 0.375 " (9.5mm) Lead Length (See Figure 1) IF(AV) 2.0 A Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-wave on Rated Load IFSM 50 A TJ -65 to +125 o -65 to +150 o Maximum Repetitive Peak Reverse Voltage Operating Junction Temperature Range (Note 6) TSTG Storage Temperature Range Notes: C C 5. Stresses greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “Recommended Operating Conditions” is not implied. Exposure to “Absolute Maximum Ratings” for extended periods may affect device reliability. 6. The heat generated must be less than the thermal conductivity from Junction to Ambient: dPD/dTJ < 1/θJA. Thermal Characteristics (TA = +25oC, unless otherwise noted.) Characteristic Symbol Typical Thermal Resistance (Note 7) Note 7: Rating RθJA Unit DO-41/DO-15 52 DO-214AC 90 SOD-123 200 C/W Device mounted on heat sink, with minimum recommended pad layout per http://www.diodes.com Electrical Characteristics Characteristic (TA = +25oC, unless otherwise noted.) Symbol Rating Unit Test Condition Forward Voltage @ IF=2.0A VF 0.5 V – Reverse Current @ Rated VR (Note 8) IR TA=+25C 0.5 mA 10 Note 8: TA=+100C Short duration pulse test used to minimize self-heating effect, Pulse Test: 300μs pulse width, 1.0% duty cycle. APD240 Document number: DS36971 Rev. 2 - 2 4 of 12 www.diodes.com June 2014 © Diodes Incorporated 2.5 10 Instantaneous Forward Current (A) IF(AV), Average Rectified Forward Current (A) APD240 2.0 1.5 1.0 0.5 Resistive or Inductive Load 0.375'' (9.5mm) Lead length 1 0.1 o TJ=+25 C o TJ=+125 C 0.01 0.0 0 25 50 75 100 125 0.0 150 0.2 0.4 o 0.8 1.0 1.2 1.4 1.6 Instantaneous Forward Voltage (V) TL, Lead Temperature ( C) Figure 1. Forward Current Derating Curve Figure 2. Typical Instantaneous Forward Characteristics 100000 50 Instantanous Reverse Current (A) 45 Peak Forward Surge Current (A) 0.6 40 35 30 25 20 TJ=TJmax Single Half Sine-Wave 15 10000 1000 10 o TJ=+25 C 100 o TJ=+125 C 10 1 1 10 100 0 20 40 60 80 100 Number of Cycles at 60Hz Percent of Rated Peak Reverse Voltage (%) Figure 3. Maximum Non-Repetitive Peak Forward Surge Current Figure 4. Typical Reverse Characteristics Junction Capacitance (pF) o TJ=+25 C f=1.0MHz VSIG=50mVp-p 100 10 0.1 1 10 100 Reverse Voltage (V) Figure 5. Typical Junction Capacitance APD240 Document number: DS36971 Rev. 2 - 2 5 of 12 www.diodes.com June 2014 © Diodes Incorporated APD240 Package Outline Dimensions (All dimensions in mm(inch).) (1) Package Type: DO-41 25. 400(1. 000) MIN 0. 700(0. 028) 0. 900(0. 035) DIA. Cathode line by marking 4. 200(0. 165) 5. 200(0. 205) 2. 000(0. 080) 2. 700(0. 107) DIA. 25. 400(1. 000) MIN APD240 Document number: DS36971 Rev. 2 - 2 6 of 12 www.diodes.com June 2014 © Diodes Incorporated APD240 Package Outline Dimensions (Cont. All dimensions in mm(inch).) (2) Package Type: DO-15 25. 400(1. 000) MIN 0. 700(0. 028) 0. 900( 0.035) DIA. Cathode line by marking 5.800(0.228) 7.600(0.299) 2.600(0.102) 3.600(0.142) DIA. 25. 400(1. 000) MIN APD240 Document number: DS36971 Rev. 2 - 2 7 of 12 www.diodes.com June 2014 © Diodes Incorporated APD240 Package Outline Dimensions (Cont. All dimensions in mm(inch).) (3) Package Type: DO-214AC 3. 990(0.157) 4.750(0.187) 2.400(0.094) 2.830(0.111) 1.250(0.049) 1.650(0.065) Cathode line by marking 0.150(0.006) 0.310(0.012) 1. 900(0. 075) 2. 290(0. 090) 0.080(0.003) 0. 310(0. 012) 0. 760(0. 030) 1. 520(0. 060) 4. 800(0. 189) 5. 280(0. 208) APD240 Document number: DS36971 Rev. 2 - 2 8 of 12 www.diodes.com June 2014 © Diodes Incorporated APD240 Package Outline Dimensions (Cont. All dimensions in mm(inch).) (4) Package Type: SOD-123 Cathode line by marking 2.600(0.102) 3.100(0.122) 0.000(0.000) 0.100(0.004) 1.630(0.064) 2.000(0.079) 0.850(0.033) 1.250(0.049) 3.500(0.138) 3.900(0.154) 0.900(0.035) 1.080(0.043) 0.100(0.004) 0.250(0.010) Option 2 Option 1 0.200(0.008) TYP 0.950(0.037) 1.250(0.049) 1.100(0.043) TYP 0.430(0.017) 0.830(0.033) APD240 Document number: DS36971 Rev. 2 - 2 0.400(0.016) 0.500(0.020) 9 of 12 www.diodes.com 1.350(0.053) TYP 0.400(0.016) 0.500(0.020) June 2014 © Diodes Incorporated APD240 Suggested Pad Layout (1) Package Type: DO-214AC G Y X1 X Dimensions Y (mm)/(inch) X1 (mm)/(inch) G (mm)/(inch) X (mm)/(inch) Value 2.100/0.083 2.000/0.079 1.600/0.063 5.600/0.220 APD240 Document number: DS36971 Rev. 2 - 2 10 of 12 www.diodes.com June 2014 © Diodes Incorporated APD240 Suggested Pad Layout (Cont.) (2) Package Type: SOD-123 Option 1 X1 X2 G Y2 Y1 Option 2 X1 G X2 Y2 Y1 Dimensions G (mm)/(inch) X1 (mm)/(inch) X2 (mm)/(inch) Y1 (mm)/(inch) Y2 (mm)/(inch) Option1 2.100/0.083 1.000/0.039 1.000/0.039 1.400/0.055 1.400/0.055 Option2 1.000/0.039 2.200/0.087 0.900/0.035 1.400/0.055 1.400/0.055 APD240 Document number: DS36971 Rev. 2 - 2 11 of 12 www.diodes.com June 2014 © Diodes Incorporated APD240 IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2014, Diodes Incorporated www.diodes.com APD240 Document number: DS36971 Rev. 2 - 2 12 of 12 www.diodes.com June 2014 © Diodes Incorporated