ASL033 5 ~ 4000 MHz MMIC Amplifier Description Features 14.6 dB Gain at 470 MHz 17 dBm P1dB at 470 MHz 18 dBm Output IP3 at 470 MHz 1.2 dB NF at 470 MHz MTTF > 100 Years Single Supply ASL033 is a one-stage LNA for mobile TV receiver low noise block. It has a low noise, high gain, and high linearity over a wide range of frequency up to 4 GHz. It is also suitable for use in the low noise amplifier block of mobile wireless systems. The amplifier is available in a SOT363 package and passes the stringent DC, RF, and reliability tests. Package Style: SOT363 Package Style: SOT-363 Typical Performance (Supply Voltage = Device Voltage, TA = +25 C, Z0 = 50 ) Parameters Units Typical Frequency MHz 40 170 240 470 860 1575 Gain dB 17.0 16.6 15.5 14.6 14.2 15.5 S11 dB -11 -5 -4 -4 -10 -20 S22 dB -20 -11 -10 -10 -10 -15 Output IP31) dBm 201) 202) 182) 182) 202) 231) DVB-T (V, U band) / Noise Figure dB 1.1 1.1 1.2 1.2 1.1 1.3 Contact ESD +4 kV Output P1dB dBm 17.0 14.0 15.5 17.0 17.5 10.5 Current mA 10 5 5 5 5 13 Device Voltage (V) V +3.3 +3.0 +3.0 +3.0 +3.0 +5.0 1) OIP3 is measured with two tones at an output power of -5 dBm/tone separated by 1 MHz. 2) OIP3 is measured with two tones at an output power of +0 dBm/tone separated by 1 MHz. Application Circuit DVB-T (V, U band) DVB, CMMB DVB-T (V, U band), 75 Ω 10 ~ 88 MHz ATSC (40 ~ 900 MHz) Product Specifications TETRA Parameters Units Min Typ Testing Frequency MHz 470 Gain dB 14.6 S11 dB -4 S22 dB -10 Output IP3 dBm 18 Noise Figure dB 1.2 Output P1dB dBm 17 Current mA 5 Device Voltage (V) V +3.0 Max 434 MHz 1450 ~ 1500 MHz GPS Pin Configuration Absolute Maximum Ratings Parameters Rating Operating Case Temperature -40 to 85 C Pin No. Function Storage Temperature -40 to 150 C 1 RF IN Device Voltage (V) +5.5 V Operating Junction Temperature +150 C 4 RF OUT & Bias Input RF Power (CW, 50 matched)* +20 dBm 2,3,5,6 GND Thermal Resistance 210 C/W * Please find the max. input power data from http://www.asb.co.kr/pdf/Maximum_Input_Power_Analysis.pdf 1/21 ASB Inc. [email protected] Tel: +82-42-528-7225 April 2017 ASL033 5 ~ 4000 MHz MMIC Amplifier Outline Drawing Symbols L03 A A1 A2 b C D F E1 e e1 L Pin NO. 1 Dimensions (In mm) MIN NOM 0.90 1.00 0.025 0.062 0.875 0.937 0.20 0.30 0.10 0.125 1.90 2.00 1.15 1.25 2.00 2.10 -0.65BSC -1.30BSC -0.425REF MAX 1.10 0.10 1.00 0.40 0.15 2.10 1.35 2.20 ---- Function Pin NO. Function. RF IN 4 RF OUT & Bias 2 GND 5 GND 3 GND 6 GND Mounting Recommendation (In mm) Note: 1. The number and size of ground via holes in a circuit board is critical for thermal and RF grounding considerations. 2. We recommend that the ground via holes be placed on the bottom of lead pin 2 for better RF and thermal performance, as shown in the drawing at the left side. ESD Classification & Moisture Sensitivity Level ESD Classification HBM Class 1A Voltage Level: 400 V MM Class A Voltage Level: 50 V CAUTION: ESD-sensitive device! Moisture Sensitivity Level (MSL) Level 3 at 260 C reflow 2/21 ASB Inc. [email protected] Tel: +82-42-528-7225 April 2017 ASL033 5 ~ 4000 MHz MMIC Amplifier Frequency (MHz) 170 240 470 860 Magnitude S21 (dB) 20.2 19.6 18.4 16.6 Magnitude S11 (dB) -6 -7 -6 -6 Magnitude S22 (dB) -15 -8 -6 -6 DVB-T (V, U band) Output P1dB (dBm) 15.0 16.5 17.5 17.5 170 ~ 860 MHz Output IP31) (dBm) 24 21 21 19 Noise Figure (dB) 1.2 1.2 1.2 1.2 Device Voltage (V) +3.3 +3.3 +3.3 +3.3 Current (mA) 10 10 10 10 APPLICATION CIRCUIT +3.3 V 1) OIP3 is measured with two tones at an output power of +0 dBm/tone separated by 1 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic Vcc=3.3 V C3=1 F C1=100 pF RF IN L1=82 nH ASL033 C2=15 pF RF OUT R1=820 S-parameters & K-factor 25 0 20 15 S11 (dB) Gain (dB) -5 10 -10 -15 5 0 -20 0 200 400 600 800 1000 0 200 400 Frequency (MHz) 600 800 1000 Frequency (MHz) 0 5 4 Stability Factor S22 (dB) -5 -10 3 2 -15 1 -20 0 0 200 400 600 800 1000 0 500 Frequency (MHz) 3/21 1000 1500 2000 2500 3000 3500 Frequency (MHz) ASB Inc. [email protected] Tel: +82-42-528-7225 April 2017 ASL033 5 ~ 4000 MHz MMIC Amplifier Frequency (MHz) 170 240 470 860 Magnitude S21 (dB) 21.0 20.6 19.0 16.8 Magnitude S11 (dB) -6 -5 -4 -4 Magnitude S22 (dB) -18 -9 -6 -6 DVB-T (V, U band) Output P1dB (dBm) 14.5 16.0 17.5 17.5 170 ~ 860 MHz Output IP31) (dBm) 23 22 21 19 Noise Figure (dB) 1.2 1.1 1.0 1.1 Device Voltage (V) +3.3 +3.3 +3.3 +3.3 Current (mA) 10 10 10 10 APPLICATION CIRCUIT +3.3 V, Contact ESD +4 kV 1) OIP3 is measured with two tones at an output power of +0 dBm/tone separated by 1 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic S-parameters & K-factor 0 25 20 15 S11 (dB) Gain (dB) -5 10 -10 -15 5 0 -20 0 200 400 600 800 1000 0 200 Frequency (MHz) 400 600 800 1000 800 1000 Frequency (MHz) 0 3.0 2.5 -5 2.0 NF (dB) S22 (dB) -10 -15 1.5 1.0 -20 0.5 -25 0 200 400 600 800 1000 0.0 0 Frequency (MHz) 4/21 200 400 600 Frequency (MHz) ASB Inc. [email protected] Tel: +82-42-528-7225 April 2017 ASL033 5 ~ 4000 MHz MMIC Amplifier Frequency (MHz) 170 240 470 860 Magnitude S21 (dB) 16.6 15.5 14.6 14.2 Magnitude S11 (dB) -5 -4 -4 -10 Magnitude S22 (dB) -11 -10 -10 -10 DVB-T (V, U band) Output P1dB (dBm) 14.0 15.5 17.0 17.5 170 ~ 860 MHz Output IP31) (dBm) 20 18 18 20 Noise Figure (dB) 1.1 1.2 1.2 1.1 Device Voltage (V) +3 +3 +3 +3 Current (mA) 5 5 5 5 APPLICATION CIRCUIT +3 V 1) OIP3 is measured with two tones at an output power of +0 dBm/tone separated by 1 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic Vcc=3 V C3=1 F C1=1000 pF RF IN L1=82 nH ASL033 L2=10 nH C2=15 pF RF OUT R1=160 S-parameters & K-factor 25 0 20 15 S11 (dB) Gain (dB) -5 10 -10 -15 5 0 -20 0 200 400 600 800 1000 0 200 400 Frequency (MHz) 600 800 1000 Frequency (MHz) 0 5 4 Stability Factor S22 (dB) -5 -10 3 2 -15 1 -20 0 0 200 400 600 800 1000 0 500 Frequency (MHz) 5/21 1000 1500 2000 2500 3000 3500 Frequency (MHz) ASB Inc. [email protected] Tel: +82-42-528-7225 April 2017 ASL033 5 ~ 4000 MHz MMIC Amplifier Frequency (MHz) 170 240 470 860 Magnitude S21 (dB) 17.8 16.9 15.7 14.3 Magnitude S11 (dB) -6 -5 -4 -5 Magnitude S22 (dB) -9 -5 -4 -4 DVB-T (V, U band) Output P1dB (dBm) 15.5 16.5 17.5 17.5 170 ~ 860 MHz Output IP31) (dBm) 24 21 21 18 Noise Figure (dB) 1.3 1.4 1.4 1.4 Device Voltage (V) +3 +3 +3 +3 Current (mA) 5 5 5 5 APPLICATION CIRCUIT +3 V 1) OIP3 is measured with two tones at an output power of +0 dBm/tone separated by 1 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic Vcc=3 V C3=1 F C1=100 pF RF IN L1=82 nH ASL033 C2=15 pF RF OUT R1=820 S-parameters & K-factor 25 0 20 15 S11 (dB) Gain (dB) -5 10 -10 -15 5 0 -20 0 200 400 600 800 1000 0 200 400 Frequency (MHz) 600 800 1000 Frequency (MHz) 0 5 4 Stability Factor S22 (dB) -5 -10 3 2 -15 1 -20 0 0 200 400 600 800 1000 0 500 Frequency (MHz) 6/21 1000 1500 2000 2500 3000 3500 Frequency (MHz) ASB Inc. [email protected] Tel: +82-42-528-7225 April 2017 ASL033 5 ~ 4000 MHz MMIC Amplifier Frequency (MHz) 470 790 470 790 Magnitude S21 (dB) 15 14 17 16 Magnitude S11 (dB) -8 -8 -12 -12 Magnitude S22 (dB) -10 -10 -17 -14 DVB & CMMB Output P1dB (dBm) 18 18 18 18 170 ~ 860 MHz Output IP31) (dBm) 18 17 21 20 Noise Figure (dB) 1.3 1.3 1.1 1.1 Device Voltage (V) +3.0 +3.0 +3.3 +3.3 Current (mA) 5 5 10 10 APPLICATION CIRCUIT +3 V, 3.3 V 1) OIP3 is measured with two tones at an output power of -5 dBm/tone separated by 1 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic Vs=3.3 V C4=1 F C1=100 pF RF IN L1=82 nH ASL033 C2=100 pF RF OUT R1=1 k L2=100 nH C3=0.1 F S parameters & K-factor (3.3V) 20 0 15 -5 S11 (dB) Gain (dB) o 10 o -40 c o 25 c o 85 c 5 -40 c o 25 c o 85 c -10 -15 -20 0 0 200 400 600 800 0 1000 200 400 600 800 1000 Frequency (MHz) Frequency (MHz) 0 5 o -40 c o 25 c o 85 c 4 Stability Factor S22 (dB) -5 -10 3 2 -15 1 -20 0 0 200 400 600 800 1000 0 500 7/21 1000 1500 2000 2500 3000 3500 Frequency (MHz) Frequency (MHz) ASB Inc. [email protected] Tel: +82-42-528-7225 April 2017 ASL033 5 ~ 4000 MHz MMIC Amplifier Gain vs. Temperature 20 20 15 18 Gain (dB) Current (mA) Current vs. Temperature 10 14 5 0 -60 16 -40 -20 0 20 40 60 80 12 -60 100 Frequency = 470 MHz -40 -20 0 P1dB vs. Temperature 60 80 100 Output IP3 vs. Temperature 22 26 24 Output IP3 (dBm) 20 P1dB (dBm) 40 Temperature ( C) Temperature ( C) 18 16 22 20 18 Frequency = 470 MHz 14 12 -60 20 o o Frequency = 470 MHz 16 -40 -20 0 20 40 60 80 14 -60 100 -40 -20 0 o 20 40 60 80 100 o Temperature ( C) Temperature ( C) NF vs. Temperature NF vs. Frequency 1.6 2.0 1.4 1.5 1.2 NF (dB) NF (dB) 1.0 0.8 0.6 1.0 0.5 Frequency = 470 MHz 0.4 0.2 -60 -40 -20 0 20 40 60 80 100 0.0 0.0 0.2 o 8/21 0.4 0.6 0.8 1.0 1.2 Frequency (GHz) Temperature ( C) ASB Inc. [email protected] Tel: +82-42-528-7225 April 2017 ASL033 5 ~ 4000 MHz MMIC Amplifier APPLICATION CIRCUIT DVB-T (V, U band) Frequency (MHz) 47 470 860 Magnitude S21 (dB) 20.5 19.0 17.5 Magnitude S11 (dB) -12 -13 -15 Magnitude S22 (dB) -7.5 -10 -15 Output P1dB (dBm) 17 17 17 (75 Ω) Output IP3 (dBm) 29.5 30.0 29.5 47 ~ 860 MHz Noise Figure (dB) 0.95 1.10 1.10 Device Voltage (V) +3.3 +3.3 +3.3 Current (mA) 37 37 37 1) +3.3 V 1) OIP3 is measured with two tones at an output power of +0 dBm/tone separated by 6 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic Vs=3.3 V R1=91 K C4=1 F C1=1 F RF IN L1=1 C2=1 F ASL033 RF OUT R1=1 K C3=0.1 F 0 25 -5 20 -10 15 Gain (dB) S11 (dB) S-parameters (3.3V) -15 -20 10 5 -25 0 200 400 600 800 0 1000 0 200 Frequency (MHz) 5 -5 4 Stability Factor 0 S22 (dB) -10 -15 -20 600 800 1000 800 1000 3 2 1 -25 0 0 200 400 600 800 1000 0 Frequency (MHz) 9/21 400 Frequency (MHz) 200 400 600 Frequency (MHz) ASB Inc. [email protected] Tel: +82-42-528-7225 April 2017 ASL033 5 ~ 4000 MHz MMIC Amplifier APPLICATION CIRCUIT DVB-T (V, U band) Frequency (MHz) 170 240 470 860 170 240 470 860 Magnitude S21 (dB) 18.0 18.0 17.1 15.2 19.4 19.3 18.4 16.5 Magnitude S11 (dB) -14 -18 -14 -10 -18 -18 -13 -11 Magnitude S22 (dB) -18 -18 -15 -11 -15 -13 -13 -14 Output P1dB (dBm) 17 17 17 17 12 14 17 18 (75 Ω) Output IP31) (dBm) 17.0 18.0 19.5 22.0 19.5 21.0 23.5 25.5 170 ~ 860 MHz Noise Figure (dB) 1.2 1.2 1.1 1.1 1.1 1.1 1.1 1.1 Device Voltage (V) +3.3 +3.3 +3.3 +3.3 +3.6 +3.6 +3.6 +3.6 Current (mA) 10 10 10 10 16 16 16 16 +3.3 V, 3.6 V 1) OIP3 is measured with two tones at an output power of +0 dBm/tone separated by 6 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic Vcc=3.3 V C4=1 F C1=100 pF RF IN L1=82 nH ASL033 C2=100 pF RF OUT R1=1.3 k L2=100 nH C3=0.1 F 25 0 20 -5 15 -10 S11 (dB) Gain (dB) S-parameters (3.3V) 10 5 -15 -20 0 -25 0 200 400 600 800 1000 0 200 0 0 -5 -10 -10 -20 -15 -20 600 800 1000 -30 -40 -25 0 200 400 600 800 1000 -50 0 Frequency (MHz) 10/21 400 Frequency (MHz) S12 [dB] S22 (dB) Frequency (MHz) 200 400 600 800 1000 Frequency [MHz] ASB Inc. [email protected] Tel: +82-42-528-7225 April 2017 ASL033 5 ~ 4000 MHz MMIC Amplifier APPLICATION CIRCUIT DVB (75 Ω) 400 ~ 1000 MHz Frequency (MHz) 400 1000 Noise Figure (dB) 1 1 Magnitude S21 (dB) 22 18 Magnitude S11 (dB) -10 -11 Magnitude S22 (dB) -18 -14 Output P1dB (dBm) 15 17 Output IP3 (dBm) 24 29 Device Voltage (V) +3.6 Current (mA) 16 1) +3.6 V . 1) OIP3 is measured at an output power of +0dBm/tone separated by 6MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic VDD C3=1 F L2=4.7 nH RF IN L1=82 nH C2=100 pF ASL033 C1=100 pF L3=100 nH RF OUT S-parameters 0 30 25 S11 (dB) Gain (dB) -5 20 15 -10 10 -15 5 0 0 250 500 750 1000 1250 -20 1500 0 250 Frequency (MHz) 500 750 1000 1250 1500 2500 3000 Frequency (MHz) 0 10 9 -5 8 7 Stability Factor S22 (dB) -10 -15 -20 6 5 4 3 2 -25 1 -30 0 250 500 750 1000 1250 1500 0 0 500 Frequency (MHz) 11/21 1000 1500 2000 Frequency [MHz] ASB Inc. [email protected] Tel: +82-42-528-7225 April 2017 ASL033 5 ~ 4000 MHz MMIC Amplifier APPLICATION CIRCUIT SMATV(75 Ω) Frequency (MHz) 900 1500 2100 900 1500 2100 Magnitude S21 (dB) 13.0 11.9 10.2 14.3 13.1 11.4 Magnitude S11 (dB) -11 -16 -10 -10 -18 -12 Magnitude S22 (dB) -11 -14 -11 -14 -18 -12 Output P1dB (dBm) 17 13 14 16 10 12 1) Output IP3 (dBm) 22 18 16 25 17 19 900 ~ 2100 MHz Noise Figure (dB) 2.1 2.2 2.0 2.0 2.0 1.9 +3.3 V, 3.6 V Device Voltage (V) +3.3 +3.3 +3.3 +3.6 +3.6 +3.6 Current (mA) 10 10 10 16 16 16 1) OIP3 is measured with two tones at an output power of +0 dBm/tone separated by 6 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic Vs C4=1 F C1=100 pF RF IN L1=39 n C2=100 pF ASL033 RF OUT R1=390 C3=1 F S-parameters (3.3V) 20 5 0 15 S11 (dB) Gain (dB) -5 10 -10 -15 -20 5 -25 0 900 1200 1500 1800 2100 -30 900 1200 Frequency (MHz) 1500 1800 2100 Frequency (MHz) 5 5 0 4 Stability Factor S22 (dB) -5 -10 -15 3 2 -20 1 -25 -30 900 0 1200 1500 1800 2100 0 500 12/21 1000 1500 2000 2500 3000 Frequency (MHz) Frequency (MHz) ASB Inc. [email protected] Tel: +82-42-528-7225 April 2017 ASL033 5 ~ 4000 MHz MMIC Amplifier Frequency (MHz) 6 10 Magnitude S21 (dB) 18.3 18.2 Magnitude S11 (dB) -9 -9 Magnitude S22 (dB) -14 -14 Output P1dB (dBm) 17 17 Output IP31) (dBm) 18.5 18.5 6 ~ 10 MHz Noise Figure (dB) - 1.45 +3.3 V Device Voltage (V) +3.3 +3.3 Current (mA) 10 10 APPLICATION CIRCUIT IF 1) OIP3 is measured with two tones at an output power of –5 dBm/tone separated by 1 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic Vs=3.3 V C4=1 F C1=1 F RF IN L1=27 C2=1 F ASL033 RF OUT R1=750 C3=1 F S-parameters & K-factor 5 25 0 20 15 -10 Gain (dB) S11 (dB) -5 -15 10 -20 5 -25 -30 0 10 20 30 40 0 50 0 10 Frequency (MHz) 20 30 40 50 80 100 Frequency (MHz) 5 5 0 4 Stability Factor S22 (dB) -5 -10 -15 3 2 -20 1 -25 -30 0 0 10 20 30 40 50 0 20 Frequency (MHz) 13/21 40 60 Frequency (MHz) ASB Inc. [email protected] Tel: +82-42-528-7225 April 2017 ASL033 5 ~ 4000 MHz MMIC Amplifier Frequency (MHz) 10 88 Magnitude S21 (dB) 17.5 16.5 Magnitude S11 (dB) -11 -15 Magnitude S22 (dB) -18 -20 Output P1dB (dBm) 15.5 15.0 Output IP31) (dBm) 18.5 17.5 10 ~ 88 MHz Noise Figure (dB) 1.6 1.4 +3.3 V Device Voltage (V) +3.3 +3.3 Current (mA) 10 10 APPLICATION CIRCUIT IF 1) OIP3 is measured with two tones at an output power of –5 dBm/tone separated by 1 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic Vs=3.3 V C4=1 F C1=1 F RF IN L1=10 C2=1 F ASL033 RF OUT R1=620 C3=1 F 20 0 15 -5 S11 (dB) Gain (dB) S-parameters & K-factor 10 5 -10 -15 0 -20 0 20 40 60 80 100 0 20 40 Frequency (MHz) 60 80 100 Frequency (MHz) 0 5 -5 4 Stability Factor S22 (dB) -10 -15 -20 3 2 1 -25 0 -30 0 20 40 60 80 100 0 500 14/21 1000 1500 2000 2500 3000 3500 Frequency (MHz) Frequency (MHz) ASB Inc. [email protected] Tel: +82-42-528-7225 April 2017 ASL033 5 ~ 4000 MHz MMIC Amplifier Frequency (MHz) 40 450 900 40 450 900 Magnitude S21 (dB) 14.5 13.5 12.2 17.0 15.7 14.3 Magnitude S11 (dB) -8 -10 -11 -11 -15 -17 Magnitude S22 (dB) -12 -13 -10 -20 -20 -15 ATSC Output P1dB (dBm) 16.5 17.0 17.5 17.0 17.5 17.5 40 ~ 900 MHz Output IP31) (dBm) 19.0 18.5 16.5 19.5 20.0 18.5 Noise Figure (dB) 1.3 1.5 1.5 1.1 1.2 1.2 Device Voltage (V) +3.0 +3.0 +3.0 +3.3 +3.3 +3.3 Current (mA) 5 5 5 10 10 10 APPLICATION CIRCUIT +3 V, 3.3 V 1) OIP3 is measured with two tones at an output power of -5 dBm/tone separated by 1 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic Vs=3.3 V C4=1 F C1=10 nF RF IN L1=1.2 ASL033 C2=10 nF RF OUT R1=680 C3=1 F 20 0 15 -5 S11 (dB) Gain (dB) S parameters & K-factor (3.3V) 10 5 -10 -15 0 -20 0 200 400 600 800 1000 0 200 400 Frequency (MHz) 5 -5 4 Stability Factor 0 S22 (dB) -10 -15 800 1000 3 2 1 -20 -25 0 0 200 400 600 800 1000 0 500 1000 1500 2000 2500 3000 3500 Frequency (MHz) Frequency (MHz) 15/21 600 Frequency (MHz) ASB Inc. [email protected] Tel: +82-42-528-7225 April 2017 ASL033 5 ~ 4000 MHz MMIC Amplifier Frequency (MHz) 380 ~ 430 Magnitude S21 (dB) 20 21.5 Magnitude S11 (dB) -13 -14 Magnitude S22 (dB) -8 -11 TETRA Output P1dB (dBm) 18.5 18.0 380 ~ 430 MHz Output IP31) (dBm) 17.5 21.0 Noise Figure (dB) 1.8 1.6 Device Voltage (V) +3.3 +3.6 Current (mA) 10 14 APPLICATION CIRCUIT +3.3 V, 3.6 V 1) OIP3 is measured with two tones at an output power of +10 dBm/tone separated by 1 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic Vcc=3.3 V C5=10 nF C4=100 pF C1=100 pF RF IN L2=39 nH L1=47 nH ASL033 C2=100 pF RF OUT C3=0.75 pF 25 0 20 -5 15 -10 S11 (dB) Gain (dB) S-parameters & K-factor (3.3V) 10 5 -15 -20 0 -25 0 200 400 600 800 1000 0 200 400 Frequency (MHz) 600 800 1000 Frequency (MHz) 5 0 4 Stability Factor S22 (dB) -5 -10 3 2 -15 1 -20 0 0 200 400 600 800 1000 0 500 16/21 1000 1500 2000 2500 3000 3500 Frequency (MHz) Frequency (MHz) ASB Inc. [email protected] Tel: +82-42-528-7225 April 2017 ASL033 5 ~ 4000 MHz MMIC Amplifier Frequency (MHz) 434 Magnitude S21 (dB) 18.0 20.5 Magnitude S11 (dB) -12 -20 Magnitude S22 (dB) -6 -10 Output P1dB (dBm) 18 17 Output IP31) (dBm) 13 16 434 MHz Noise Figure (dB) 1.6 1.5 +3 V, 3.3 V Device Voltage (V) +3.0 +3.3 Current (mA) 5 10 APPLICATION CIRCUIT IF 1) OIP3 is measured with two tones at an output power of -10 dBm/tone separated by 1 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic Vcc=3.3 V C4=10 nF C1=100 pF RF IN L2=39 nH L1=39 nH ASL033 C2=100 pF RF OUT C3=1.2 pF 25 0 20 -5 15 -10 S11 (dB) Gain (dB) S-parameters & K-factor (3.3V) 10 5 -15 -20 0 -25 0 200 400 600 800 1000 0 200 400 Frequency (MHz) 600 800 1000 Frequency (MHz) 5 0 4 Stability Factor S22 (dB) -5 -10 3 2 -15 1 -20 0 0 200 400 600 800 1000 0 500 17/21 1000 1500 2000 2500 3000 3500 Frequency (MHz) Frequency (MHz) ASB Inc. [email protected] Tel: +82-42-528-7225 April 2017 ASL033 5 ~ 4000 MHz MMIC Amplifier APPLICATION CIRCUIT GPS,GLONASS,Galileo&Compass 1450 ~ 1500 MHz +3 V, 3.3 V Frequency (MHz) 1450~1500 1450~1500 Magnitude S21 (dB) 15 16 Magnitude S11 (dB) -10 -18 Magnitude S22 (dB) -8 -11 Output P1dB (dBm) 17.5 18.0 Output IP31) (dBm) 19.0 19.5 Noise Figure (dB) 1.4 1.2 Device Voltage (V) +3.0 +3.3 Current (mA) 5 10 1) OIP3 is measured with two tones at an output power of +0 dBm/tone separated by 1 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic Vcc=3.3 V C5=10 nF C4=100 pF C1=100 pF L2=5.6 nH RF IN L1=8.2 nH ASL033 C2=100 pF RF OUT C3=2.2 pF S-parameters & K-factor (3.3V) 20 0 -5 -10 S11 (dB) Gain (dB) 15 10 -15 5 -20 0 1000 1200 1400 1600 1800 2000 -25 1000 1200 1400 Frequency (MHz) 1600 1800 2000 Frequency (MHz) 5 0 4 Stability Factor S22 (dB) -5 -10 3 2 -15 1 -20 1000 0 1200 1400 1600 1800 2000 0 500 18/21 1000 1500 2000 2500 3000 3500 Frequency (MHz) Frequency (MHz) ASB Inc. [email protected] Tel: +82-42-528-7225 April 2017 ASL033 5 ~ 4000 MHz MMIC Amplifier Frequency (MHz) 1575 Magnitude S21 (dB) 15.5 Magnitude S11 (dB) -20 Magnitude S22 (dB) -15 GPS Output P1dB (dBm) 10.5 1575 MHz Output IP31) (dBm) 22.5 Noise Figure (dB) 1.3 Device Voltage (V) +5 Current (mA) 13 APPLICATION CIRCUIT +5 V 1) OIP3 is measured with two tones at an output power of -5 dBm/tone separated by 1 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic Vs=5 V R1=120 C5=10 nF C4=100 pF C1=100 pF L2=4.7 nH RF IN L1=6.8 nH ASL033 C2=100 pF RF OUT C3=2.2 pF S-parameters & K-factor 0 20 -5 -10 S11 (dB) Gain (dB) 15 10 -15 5 -20 0 1400 1450 1500 1550 1600 1650 1700 1750 1800 -25 1400 1450 1500 1550 1600 1650 1700 1750 1800 Frequency (MHz) Frequency (MHz) 5 0 4 Stability Factor S22 (dB) -5 -10 -15 -20 1400 3 2 1 0 1450 1500 1550 1600 1650 1700 1750 1800 0 500 19/21 1000 1500 2000 2500 3000 3500 Frequency (MHz) Frequency (MHz) ASB Inc. [email protected] Tel: +82-42-528-7225 April 2017 ASL033 5 ~ 4000 MHz MMIC Amplifier Frequency (MHz) 2400 2500 Magnitude S21 (dB) 12.2 12.0 Magnitude S11 (dB) -18 -18 Magnitude S22 (dB) -10 -10 Output P1dB (dBm) 18 18 Output IP31) (dBm) 21 21 2400 ~ 2500 MHz Noise Figure (dB) 1.15 1.15 3.3 V Device Voltage (V) +3.3 +3.3 Current (mA) 10 10 APPLICATION CIRCUIT WLAN 1) OIP3 is measured with two tones at an output power of +0 dBm/tone separated by 1 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic VDD C3=10 nF C5=100 pF C1=100 pF L1=2.2 nH L2=47 nH RF IN C4=100 pF ASL033 RF OUT C2=1 pF S-parameters & K-factor (3.3V) 25 5 0 20 -5 S11 (dB) Gain (dB) 15 10 -10 -15 -20 5 -25 0 2000 2200 2400 2600 2800 3000 -30 2000 2200 2400 Frequency (MHz) 2600 2800 3000 Frequency (MHz) 5 5 0 4 Stability Factor S22 (dB) -5 -10 -15 -20 3 2 1 -25 -30 2000 2200 2400 2600 2800 3000 0 0 500 Frequency (MHz) 20/21 1000 1500 2000 2500 3000 3500 Frequency (MHz) ASB Inc. [email protected] Tel: +82-42-528-7225 April 2017 ASL033 5 ~ 4000 MHz MMIC Amplifier Recommended Soldering Reflow Profile 260 C Ramp-up (3 C/sec) 20~40 sec Ramp-down (6 C/sec) 200 C 150 C 60~180 sec Copyright 2009-2017 ASB Inc. All rights reserved. Datasheet subject to change without notice. ASB assumes no responsibility for any errors which may appear in this datasheet. No part of the datasheet may be copied or reproduced in any form or by any means without the prior written consent of ASB. 21/21 ASB Inc. [email protected] Tel: +82-42-528-7225 April 2017