True Sinewave Clock Oscillators and Voltage Controlled Crystal Oscillators Model CCO-083/085 (Clock Version) and CVXO-083/085 (VCXO Version) generate frequencies from 10Mhz to 200Mhz. This low current sinewave oscillator provides -150dBc/Hz noise floor while only consuming 8mA typical. Output level is 0dBm min. into 50 ohms, and harmonics are lower than -20dBc. The series has no sub-harmonics due to the use of Inverted Mesa (High Frequency Fundamental Crystal) technology. The oscillator is offered in extended operating temperature range (-40C to +85C), also available in 3.3V and 5V models . Applications include Low current applications and sources for driving PLL and Mixers. Rev.: F Date: 03-04-08 True Sinewave Clock Oscillators and Voltage Controlled Crystal Oscillators Frequency Range: 10Mhz to 200MHz Temperature Range: (Option X) Storage: Input Voltage: (Option 3) (Option 5) Input Current: Output: Load: Power (std.): (Option B) (Option C) (Option D) Harmonics: Sub-Harmonics: Enable/Disable: Phase Noise Floor: Aging: 0°C to +70°C -40°C to +85°C -55°C to 90°C 3.3V ± 0.3V 5.0V ± 0.5V 8mA Typ., 15mA Max @3.3V 12mA Typ., 20mA Max @5.0V True Sinewave 50 ohms 0dBm Min. into 50 ohms +3dBm Min. into 50 ohms +5dBm Min. into 50 ohms +7dBm Min. into 50 ohms -20dBc Max None None -150dBc Typical <3ppm 1st/yr, <1ppm thereafter Phase Noise Typ.: 100Hz 1KHz 10KHz 100KHz CCO-083/085 Options Temperature Range: 0°C to +70°C (±25ppm Max) -40°C to +85°C (±50ppm Max) CVXO-083/085 Frequency Pulling: ±50ppm APR Min. Control Voltage (083): 1.65V ± 1.65V (085): 2.5V ± 2.0V Settability (083): 1.65V ± 0.25V (085): 2.5V ± 0.5V Linearity: ±10% Max Part Number Example CCO-083X-100.000 = 3.3V, -40°C to +85°C (±25ppm), 100MHz CVXO-085XC-100.000 = 5.0V, -40°C to +85°C (±50ppmAPR), +5dBm, 100MHz -80dBc/Hz -112 dBc/Hz -140 dBc/Hz -150 dBc/Hz Pad 1 Connection NC or Volt. Cntrl. 7 GND 8 Output 14 Vdd Rev.: F Date: 03-04-08