JDS FFP-SW3145G1 Fused coupler, pm combiner Datasheet

COMMUNICATIONS COMPONENTS
Fused Coupler, PM Combiner
Key Features
• Low insertion loss
• High power handling
• Proven reliability
• 9xx, 14xx and 15xx variants
Applications
• Erbium doped fiber amplifiers (EDFAs)
• Raman amplifiers
• Coherent optical communications
NORTH AMERICA : 800 498-JDSU (5378)
The JDSU Fused Coupler, PM Combiner enables the efficient combination of two
orthogonally polarized sources of light at the same wavelength such that they are
output through the same, single fiber output. In optical amplifiers this provides a
doubling of pump power whilst ensuring pump redundancy should a pump
failure occur. Applications include high power optical amplifiers and undersea
systems. All ports consist of polarization maintaining fiber.
WORLDWIDE : +800 5378-JDSU
WEBSITE : www.jdsu.com
FUSED COUPLER, PM COMBINER
2
Specifications
Parameter
980 nm
S band
C band
L band
Operating wavelength range1
Insertion loss (fast axis)2
Grade M
Grade W
Housing option
Dimensions (Ø x L) for 1x2 and 2x2
Insertion loss (slow axis)2
Grade M
Grade W
Return loss/Directivity
TDL
Pigtail tensile load
Optical power handling
Fiber type
Pigtail
Operating temperature range
Storage temperature range
980 nm
1440 to 1475 nm
1528 to 1563 nm
1570 to 1605 nm
0.40 dB
0.60 dB
0.40 dB
0.60 dB
0.50 dB
0.70 dB
0.50 dB
0.70 dB
Maximum
Maximum
B
3.0 x 71 mm
Maximum
Maximum
Minimum
Typical
Maximum
Maximum
1. The center wavelength may be selected from within the operating wavelength ranges supplied.
2. Insertion loss over operating channel bandwidth (not including TDL or connector losses).
0.35 dB
0.40 dB
50 dB
0.15 dB
5N
4W
All ports PM fiber
Primary-coated fiber
-5 to 75 °C
-40 to 85 °C
FUSED COUPLER, PM COMBINER
Ordering Information
For more information on this or other products and their availability, please contact your local JDSU account manager or
JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at
[email protected]
Sample: FFP-SM3245E10 (S band, PM Combiner Grade M, regular housing, 2x2 Channel Center = 1445 nm, Telecoms PM
Fiber 400 µm buffer, 1 m pigtail, no connector)
FFPCode
5
C
L
S
Code
M
W
Passband
Wavelength
980 nm
C band
L band
S band
3
Code
3
Code
1
2
Device Type
PM Combiner
Grade M
PM Combiner
Grade W
Housing
3.0 (Ø) x 71 (L) mm
primary-coated fiber
Configuration
1x2
2x2
Code
Channel Center1
Last two digits of center wavelength,
for examples:
45
1445 nm
50
1550 nm
Code
E
F
G
Fiber Type
Telecoms PM fiber 400 µm buffer
Telecoms PM fiber 250 µm buffer
980 nm PM fiber 250 µm buffer
Code
0
1
Pigtail Length2
(Minimum)
0.5 meter
1 meter
Code
0
P
R
Connectors3
NONE
FC-PM/APC
FC-PM/PC
1. Channel center must be within the selected
passband wavelength.
2. Minimum pigtail length. Other pigtail
lengths available on request.
3. Insertion loss in specification table does not
include connector loss. Other connectors
available on request.
All statements, technical information and recommendations related to the products herein are based upon information believed to be
reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any
inaccuracies. The user assumes all risks and liability whatsoever in connection with the use of a product or its application. JDSU reserves
the right to change at any time without notice the design, specifications, function, fit or form of its products described herein, including
withdrawal at any time of a product offered for sale herein. JDSU makes no representations that the products
herein are free from any intellectual property claims of others. Please contact JDSU for more information. JDSU and the JDSU logo are
trademarks of JDS Uniphase Corporation. Other trademarks are the property of their respective holders. ©2006 JDS Uniphase
Corporation. All rights reserved. 10140142 Rev. 004 02/06 FFPCOMBINER.DS.CC.AE
NORTH AMERICA : 800 498-JDSU (5378)
WORLDWIDE : +800 5378-JDSU
WEBSITE : www.jdsu.com
Similar pages