C A P A C I T O R S July 2015 MLCC with Dipped Radial Lead Halogen-free, Automotive Grade, High Temperature Application FA Series (NP0, X8R) Type: Lead pitch 5.0 mm FA28 [4.0x5.5 mm] FA24 [4.5x5.5 mm] FA26 [5.5x6.0 mm] FA20 [5.5x7.0 mm] FA22 [7.5x8.5 mm] Lead pitch 2.5 mm FA18 [4.0x5.5 mm] FA14 [4.5x5.5 mm] FA16 [5.5x6.0 mm] FA11 [5.5x7.0 mm] (2/26) C A P A C I T O R S REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using these products. REMINDERS Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and product temperature does not exceed 150°C. Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design. Do not use for a purpose outside of the contents regulated in the delivery specifications. The products listed on this catalog are intended for use in automotive electronic equipment under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the each catalog, please contact us. (1) Aerospace/Aviation equipment (2) Transportation equipment (electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipment (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose applications When designing your equipment even for automotive-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment. 20150731 / leadmlcc_halogenfree_fa150_en.fm (3/26) C A P A C I T O R S MLCC with Dipped Radial Lead Product compatible with RoHS directive Halogen-free Halogen-free, Automotive Grade, High Temperature Application Overview of the FA Series FEATURES A lineup with a rated voltage of 25V to 100V. Compatible with a wide capacitance range of 10pF to 4.7μF. For guaranteed applications withstanding rigorous temperature environments of up to 150°C. The FA series for automotive use is AEC-Q200 compliant. APPLICATION Noise reduction measures for various motors for automotive use Resonant circuits in areas such as keyless entry systems Bypass capacitors such as for switching power sources, smoothing capacitors, etc. Snubber circuits PFC input filters PART NUMBER CONSTRUCTION FA 2 Series name Lead pitch (mm) 1 2 2.5 5.0 8 4 6 0 1 2 8 NP0 1H LxWxT Dimensions (mm) 4.0x5.5x2.5 4.5x5.5x3.0 5.5x6.0x3.5 5.5x7.0x4.0 5.5x7.0x4.0 7.5x8.5x4.5 Capacitance temperature characteristics NP0 0±30ppm/°C X8R ±15% Rated voltage (V) 1E 25 1H 50 2A 100 100 D □□□ □ Nominal capacitance Capacitance tolerance Internal code Packaging Style 100 10pF 101 100pF 102 1,000pF 105 1uF D J K ±0.5pF ±5% ±10% 0 6 Bulk Taping Applicable capacitance range: Max. 10 pF for D, over 10 pF for J and K. Applied to the TDK’s standard specification products. OPERATING TEMPERATURE RANGE Operating temperature range Operating temperature Storage temperature (°C) (°C) NP0, X8R –55 to +150 –55 to +150 The Storage temperature range is for after the circuit board is mounted. Capacitance temperature characteristics RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://product.tdk.com/en/environment/rohs/ Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150731 / leadmlcc_halogenfree_fa150_en.fm (4/26) C A P A C I T O R S Overview of the FA Series PACKAGE QUANTITY Type FA28 FA24 FA26 FA20 FA22 FA18 FA14 FA16 FA11 Package quantity Taping (pieces / box) Bulk (pieces / bag) 2000 500 2000 500 2000 500 1500 500 1000 500 2000 500 2000 500 2000 500 1500 500 Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150731 / leadmlcc_halogenfree_fa150_en.fm (5/26) C A P A C I T O R S Overview of the FA Series RECOMMENDED FLOW PROFILE Soldering Preheating Natural cooling T: Temperature T2 T1 t1 t2 t3 t: Time Preheating Temp. T1 110°C min. Time t1 Over 60s. Peak Temp. T2 260°C Time t2 Within 5s. Natural cooling Time t3 Over 60s. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150731 / leadmlcc_halogenfree_fa150_en.fm (6/26) C A P A C I T O R S FA28 Type SHAPE & DIMENSIONS 2.5max. 7.0±2.0 5.5max. 4.0max. +0.10 ø0.5 –0.03 5.0±1.0 Dimensions in mm Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150731 / leadmlcc_halogenfree_fa150_en.fm (7/26) C A P A C I T O R S FA28 Type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE CLASS 1 (TEMPERATURE COMPENSATION) Temperature characteristics NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 Capacitance 10pF 15pF 22pF 33pF 47pF 68pF 100pF 120pF 150pF 180pF 220pF 270pF 330pF 390pF 470pF 560pF 680pF 820pF 1nF 1.2nF 1.5nF 1.8nF 2.2nF 2.7nF 3.3nF 3.9nF 4.7nF 5.6nF 6.8nF 8.2nF 10nF 10pF 15pF 22pF 33pF 47pF 68pF 100pF 120pF 150pF 180pF 220pF 270pF 330pF 390pF 470pF 560pF 680pF 820pF 1nF 1.2nF 1.5nF 1.8nF 2.2nF 2.7nF 3.3nF Tolerance Rated voltage Edc (V) 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 Part No. ±0.5pF FA28NP01H100DNU0□ ±5％ FA28NP01H150JNU0□ ±5％ FA28NP01H220JNU0□ ±5％ FA28NP01H330JNU0□ ±5％ FA28NP01H470JNU0□ ±5％ FA28NP01H680JNU0□ ±5％ FA28NP01H101JNU0□ ±5％ FA28NP01H121JNU0□ ±5％ FA28NP01H151JNU0□ ±5％ FA28NP01H181JNU0□ ±5％ FA28NP01H221JNU0□ ±5％ FA28NP01H271JNU0□ ±5％ FA28NP01H331JNU0□ ±5％ FA28NP01H391JNU0□ ±5％ FA28NP01H471JNU0□ ±5％ FA28NP01H561JNU0□ ±5％ FA28NP01H681JNU0□ ±5％ FA28NP01H821JNU0□ ±5％ FA28NP01H102JNU0□ ±5％ FA28NP01H122JNU0□ ±5％ FA28NP01H152JNU0□ ±5％ FA28NP01H182JNU0□ ±5％ FA28NP01H222JNU0□ ±5％ FA28NP01H272JNU0□ ±5％ FA28NP01H332JNU0□ ±5％ FA28NP01H392JNU0□ ±5％ FA28NP01H472JNU0□ ±5％ FA28NP01H562JNU0□ ±5％ FA28NP01H682JNU0□ ±5％ FA28NP01H822JNU0□ ±5％ FA28NP01H103JNU0□ ±0.5pF FA28NP02A100DNU0□ ±5％ FA28NP02A150JNU0□ ±5％ FA28NP02A220JNU0□ ±5％ FA28NP02A330JNU0□ ±5％ FA28NP02A470JNU0□ ±5％ FA28NP02A680JNU0□ ±5％ FA28NP02A101JNU0□ ±5％ FA28NP02A121JNU0□ ±5％ FA28NP02A151JNU0□ ±5％ FA28NP02A181JNU0□ ±5％ FA28NP02A221JNU0□ ±5％ FA28NP02A271JNU0□ ±5％ FA28NP02A331JNU0□ ±5％ FA28NP02A391JNU0□ ±5％ FA28NP02A471JNU0□ ±5％ FA28NP02A561JNU0□ ±5％ FA28NP02A681JNU0□ ±5％ FA28NP02A821JNU0□ ±5％ FA28NP02A102JNU0□ ±5％ FA28NP02A122JNU0□ ±5％ FA28NP02A152JNU0□ ±5％ FA28NP02A182JNU0□ ±5％ FA28NP02A222JNU0□ ±5％ FA28NP02A272JNU0□ ±5％ FA28NP02A332JNU0□ * The part numbers are TDK’s standard specification products. The " □ " of the Part Number contains the packaging symbol, 0 (Bulk packaging) or 6 (Taping packaging). Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150731 / leadmlcc_halogenfree_fa150_en.fm (8/26) C A P A C I T O R S FA28 Type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE CLASS 2 (TEMPERATURE STABLE) Temperature characteristics X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R Capacitance 68nF 100nF 150nF 220nF 1nF 1.5nF 2.2nF 3.3nF 4.7nF 6.8nF 10nF 15nF 22nF 33nF 47nF 68nF 100nF 1nF 1.5nF 2.2nF 3.3nF 4.7nF 6.8nF 10nF 15nF 22nF 33nF Tolerance Rated voltage Edc (V) 25 25 25 25 50 50 50 50 50 50 50 50 50 50 50 50 50 100 100 100 100 100 100 100 100 100 100 Part No. ±10％ FA28X8R1E683KNU0□ ±10％ FA28X8R1E104KNU0□ ±10％ FA28X8R1E154KRU0□ ±10％ FA28X8R1E224KRU0□ ±10％ FA28X8R1H102KNU0□ ±10％ FA28X8R1H152KNU0□ ±10％ FA28X8R1H222KNU0□ ±10％ FA28X8R1H332KNU0□ ±10％ FA28X8R1H472KNU0□ ±10％ FA28X8R1H682KNU0□ ±10％ FA28X8R1H103KNU0□ ±10％ FA28X8R1H153KNU0□ ±10％ FA28X8R1H223KNU0□ ±10％ FA28X8R1H333KNU0□ ±10％ FA28X8R1H473KNU0□ ±10％ FA28X8R1H683KRU0□ ±10％ FA28X8R1H104KRU0□ ±10％ FA28X8R2A102KNU0□ ±10％ FA28X8R2A152KNU0□ ±10％ FA28X8R2A222KNU0□ ±10％ FA28X8R2A332KNU0□ ±10％ FA28X8R2A472KNU0□ ±10％ FA28X8R2A682KNU0□ ±10％ FA28X8R2A103KNU0□ ±10％ FA28X8R2A153KNU0□ ±10％ FA28X8R2A223KRU0□ ±10％ FA28X8R2A333KRU0□ * The part numbers are TDK’s standard specification products. The " □ " of the Part Number contains the packaging symbol, 0 (Bulk packaging) or 6 (Taping packaging). Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150731 / leadmlcc_halogenfree_fa150_en.fm (9/26) C A P A C I T O R S FA24 Type SHAPE & DIMENSIONS 3.0max. 7.0±2.0 5.5max. 4.5max. +0.10 ø0.5 –0.03 5.0±1.0 Dimensions in mm Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150731 / leadmlcc_halogenfree_fa150_en.fm (10/26) C A P A C I T O R S FA24 Type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE CLASS 1 (TEMPERATURE COMPENSATION) Temperature characteristics NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 Capacitance Tolerance 15nF 22nF 33nF 3.9nF 4.7nF 5.6nF 6.8nF 8.2nF 10nF Rated voltage Edc (V) 50 50 50 100 100 100 100 100 100 Part No. ±5％ FA24NP01H153JNU0□ ±5％ FA24NP01H223JNU0□ ±5％ FA24NP01H333JNU0□ ±5％ FA24NP02A392JNU0□ ±5％ FA24NP02A472JNU0□ ±5％ FA24NP02A562JNU0□ ±5％ FA24NP02A682JNU0□ ±5％ FA24NP02A822JNU0□ ±5％ FA24NP02A103JNU0□ * The part numbers are TDK’s standard specification products. The " □ " of the Part Number contains the packaging symbol, 0 (Bulk packaging) or 6 (Taping packaging). CLASS 2 (TEMPERATURE STABLE) Temperature characteristics X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R Capacitance 150nF 220nF 330nF 470nF 68nF 100nF 150nF 220nF 22nF 47nF 68nF Tolerance Rated voltage Edc (V) 25 25 25 25 50 50 50 50 100 100 100 Part No. ±10％ FA24X8R1E154KNU0□ ±10％ FA24X8R1E224KNU0□ ±10％ FA24X8R1E334KNU0□ ±10％ FA24X8R1E474KRU0□ ±10％ FA24X8R1H683KNU0□ ±10％ FA24X8R1H104KNU0□ ±10％ FA24X8R1H154KRU0□ ±10％ FA24X8R1H224KRU0□ ±10％ FA24X8R2A223KNU0□ ±10％ FA24X8R2A473KRU0□ ±10％ FA24X8R2A683KRU0□ * The part numbers are TDK’s standard specification products. The " □ " of the Part Number contains the packaging symbol, 0 (Bulk packaging) or 6 (Taping packaging). Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150731 / leadmlcc_halogenfree_fa150_en.fm (11/26) C A P A C I T O R S FA26 Type SHAPE & DIMENSIONS 3.5max. 7.0±2.0 6.0max. 5.5max. +0.10 ø0.5 –0.03 5.0±1.0 Dimensions in mm Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150731 / leadmlcc_halogenfree_fa150_en.fm (12/26) C A P A C I T O R S FA26 Type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE CLASS 1 (TEMPERATURE COMPENSATION) Temperature characteristics NP0 NP0 NP0 NP0 NP0 NP0 Capacitance Tolerance 47nF 68nF 100nF 15nF 22nF 33nF Rated voltage Edc (V) 50 50 50 100 100 100 Part No. ±5％ FA26NP01H473JNU0□ ±5％ FA26NP01H683JNU0□ ±5％ FA26NP01H104JNU0□ ±5％ FA26NP02A153JNU0□ ±5％ FA26NP02A223JNU0□ ±5％ FA26NP02A333JNU0□ * The part numbers are TDK’s standard specification products. The " □ " of the Part Number contains the packaging symbol, 0 (Bulk packaging) or 6 (Taping packaging). CLASS 2 (TEMPERATURE STABLE) Temperature characteristics X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R Capacitance 470nF 680nF 1uF 1.5uF 2.2uF 150nF 220nF 330nF 470nF 680nF 1uF 33nF 47nF 68nF 100nF 150nF 220nF 330nF Tolerance Rated voltage Edc (V) 25 25 25 25 25 50 50 50 50 50 50 100 100 100 100 100 100 100 Part No. ±10％ FA26X8R1E474KNU0□ ±10％ FA26X8R1E684KNU0□ ±10％ FA26X8R1E105KNU0□ ±10％ FA26X8R1E155KRU0□ ±10％ FA26X8R1E225KRU0□ ±10％ FA26X8R1H154KNU0□ ±10％ FA26X8R1H224KNU0□ ±10％ FA26X8R1H334KNU0□ ±10％ FA26X8R1H474KNU0□ ±10％ FA26X8R1H684KRU0□ ±10％ FA26X8R1H105KRU0□ ±10％ FA26X8R2A333KNU0□ ±10％ FA26X8R2A473KNU0□ ±10％ FA26X8R2A683KNU0□ ±10％ FA26X8R2A104KNU0□ ±10％ FA26X8R2A154KNU0□ ±10％ FA26X8R2A224KRU0□ ±10％ FA26X8R2A334KRU0□ * The part numbers are TDK’s standard specification products. The " □ " of the Part Number contains the packaging symbol, 0 (Bulk packaging) or 6 (Taping packaging). Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150731 / leadmlcc_halogenfree_fa150_en.fm (13/26) C A P A C I T O R S FA20 Type SHAPE & DIMENSIONS 4.0max. 7.0±2.0 7.0max. 5.5max. +0.10 ø0.5 –0.03 5.0±1.0 Dimensions in mm Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150731 / leadmlcc_halogenfree_fa150_en.fm (14/26) C A P A C I T O R S FA20 Type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE CLASS 1 (TEMPERATURE COMPENSATION) Temperature characteristics NP0 NP0 Capacitance Tolerance 47nF 68nF Rated voltage Edc (V) 100 100 Part No. ±5％ FA20NP02A473JNU0□ ±5％ FA20NP02A683JNU0□ * The part numbers are TDK’s standard specification products. The " □ " of the Part Number contains the packaging symbol, 0 (Bulk packaging) or 6 (Taping packaging). CLASS 2 (TEMPERATURE STABLE) Temperature characteristics X8R X8R X8R X8R X8R X8R Capacitance 1.5uF 2.2uF 3.3uF 4.7uF 470nF 680nF Tolerance Rated voltage Edc (V) 25 25 25 25 100 100 Part No. ±10％ FA20X8R1E155KNU0□ ±10％ FA20X8R1E225KNU0□ ±10％ FA20X8R1E335KNU0□ ±10％ FA20X8R1E475KRU0□ ±10％ FA20X8R2A474KRU0□ ±10％ FA20X8R2A684KRU0□ * The part numbers are TDK’s standard specification products. The " □ " of the Part Number contains the packaging symbol, 0 (Bulk packaging) or 6 (Taping packaging). Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150731 / leadmlcc_halogenfree_fa150_en.fm (15/26) C A P A C I T O R S FA22 Type SHAPE & DIMENSIONS 4.5max. 7.0±2.0 8.5max. 7.5max. Dimensions in mm +0.10 ø0.5 –0.03 5.0±1.0 Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150731 / leadmlcc_halogenfree_fa150_en.fm (16/26) C A P A C I T O R S FA22 Type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE CLASS 1 (TEMPERATURE COMPENSATION) Temperature characteristics NP0 NP0 NP0 Capacitance 150nF 220nF 100nF Tolerance Rated voltage Edc (V) 50 50 100 Part No. ±5％ FA22NP01H154JNU0□ ±5％ FA22NP01H224JNU0□ ±5％ FA22NP02A104JNU0□ * The part numbers are TDK’s standard specification products. The " □ " of the Part Number contains the packaging symbol, 0 (Bulk packaging) or 6 (Taping packaging). Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150731 / leadmlcc_halogenfree_fa150_en.fm (17/26) C A P A C I T O R S FA18 Type SHAPE & DIMENSIONS 2.5max. 7.0±2.0 5.5max. 4.0max. +0.10 ø0.5 –0.03 2.5±0.8 Dimensions in mm Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150731 / leadmlcc_halogenfree_fa150_en.fm (18/26) C A P A C I T O R S FA18 Type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE CLASS 1 (TEMPERATURE COMPENSATION) Temperature characteristics NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 Capacitance 10pF 15pF 22pF 33pF 47pF 68pF 100pF 120pF 150pF 180pF 220pF 270pF 330pF 390pF 470pF 560pF 680pF 820pF 1nF 1.2nF 1.5nF 1.8nF 2.2nF 2.7nF 3.3nF 3.9nF 4.7nF 5.6nF 6.8nF 8.2nF 10nF 10pF 15pF 22pF 33pF 47pF 68pF 100pF 120pF 150pF 180pF 220pF 270pF 330pF 390pF 470pF 560pF 680pF 820pF 1nF 1.2nF 1.5nF 1.8nF 2.2nF 2.7nF 3.3nF Tolerance Rated voltage Edc (V) 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 Part No. ±0.5pF FA18NP01H100DNU0□ ±5％ FA18NP01H150JNU0□ ±5％ FA18NP01H220JNU0□ ±5％ FA18NP01H330JNU0□ ±5％ FA18NP01H470JNU0□ ±5％ FA18NP01H680JNU0□ ±5％ FA18NP01H101JNU0□ ±5％ FA18NP01H121JNU0□ ±5％ FA18NP01H151JNU0□ ±5％ FA18NP01H181JNU0□ ±5％ FA18NP01H221JNU0□ ±5％ FA18NP01H271JNU0□ ±5％ FA18NP01H331JNU0□ ±5％ FA18NP01H391JNU0□ ±5％ FA18NP01H471JNU0□ ±5％ FA18NP01H561JNU0□ ±5％ FA18NP01H681JNU0□ ±5％ FA18NP01H821JNU0□ ±5％ FA18NP01H102JNU0□ ±5％ FA18NP01H122JNU0□ ±5％ FA18NP01H152JNU0□ ±5％ FA18NP01H182JNU0□ ±5％ FA18NP01H222JNU0□ ±5％ FA18NP01H272JNU0□ ±5％ FA18NP01H332JNU0□ ±5％ FA18NP01H392JNU0□ ±5％ FA18NP01H472JNU0□ ±5％ FA18NP01H562JNU0□ ±5％ FA18NP01H682JNU0□ ±5％ FA18NP01H822JNU0□ ±5％ FA18NP01H103JNU0□ ±0.5pF FA18NP02A100DNU0□ ±5％ FA18NP02A150JNU0□ ±5％ FA18NP02A220JNU0□ ±5％ FA18NP02A330JNU0□ ±5％ FA18NP02A470JNU0□ ±5％ FA18NP02A680JNU0□ ±5％ FA18NP02A101JNU0□ ±5％ FA18NP02A121JNU0□ ±5％ FA18NP02A151JNU0□ ±5％ FA18NP02A181JNU0□ ±5％ FA18NP02A221JNU0□ ±5％ FA18NP02A271JNU0□ ±5％ FA18NP02A331JNU0□ ±5％ FA18NP02A391JNU0□ ±5％ FA18NP02A471JNU0□ ±5％ FA18NP02A561JNU0□ ±5％ FA18NP02A681JNU0□ ±5％ FA18NP02A821JNU0□ ±5％ FA18NP02A102JNU0□ ±5％ FA18NP02A122JNU0□ ±5％ FA18NP02A152JNU0□ ±5％ FA18NP02A182JNU0□ ±5％ FA18NP02A222JNU0□ ±5％ FA18NP02A272JNU0□ ±5％ FA18NP02A332JNU0□ * The part numbers are TDK’s standard specification products. The " □ " of the Part Number contains the packaging symbol, 0 (Bulk packaging) or 6 (Taping packaging). Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150731 / leadmlcc_halogenfree_fa150_en.fm (19/26) C A P A C I T O R S FA18 Type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE CLASS 2 (TEMPERATURE STABLE) Temperature characteristics X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R Capacitance 68nF 100nF 150nF 220nF 1nF 1.5nF 2.2nF 3.3nF 4.7nF 6.8nF 10nF 15nF 22nF 33nF 47nF 68nF 100nF 1nF 1.5nF 2.2nF 3.3nF 4.7nF 6.8nF 10nF 15nF 22nF 33nF Tolerance Rated voltage Edc (V) 25 25 25 25 50 50 50 50 50 50 50 50 50 50 50 50 50 100 100 100 100 100 100 100 100 100 100 Part No. ±10％ FA18X8R1E683KNU0□ ±10％ FA18X8R1E104KNU0□ ±10％ FA18X8R1E154KRU0□ ±10％ FA18X8R1E224KRU0□ ±10％ FA18X8R1H102KNU0□ ±10％ FA18X8R1H152KNU0□ ±10％ FA18X8R1H222KNU0□ ±10％ FA18X8R1H332KNU0□ ±10％ FA18X8R1H472KNU0□ ±10％ FA18X8R1H682KNU0□ ±10％ FA18X8R1H103KNU0□ ±10％ FA18X8R1H153KNU0□ ±10％ FA18X8R1H223KNU0□ ±10％ FA18X8R1H333KNU0□ ±10％ FA18X8R1H473KNU0□ ±10％ FA18X8R1H683KRU0□ ±10％ FA18X8R1H104KRU0□ ±10％ FA18X8R2A102KNU0□ ±10％ FA18X8R2A152KNU0□ ±10％ FA18X8R2A222KNU0□ ±10％ FA18X8R2A332KNU0□ ±10％ FA18X8R2A472KNU0□ ±10％ FA18X8R2A682KNU0□ ±10％ FA18X8R2A103KNU0□ ±10％ FA18X8R2A153KNU0□ ±10％ FA18X8R2A223KRU0□ ±10％ FA18X8R2A333KRU0□ * The part numbers are TDK’s standard specification products. The " □ " of the Part Number contains the packaging symbol, 0 (Bulk packaging) or 6 (Taping packaging). Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150731 / leadmlcc_halogenfree_fa150_en.fm (20/26) C A P A C I T O R S FA14 Type SHAPE & DIMENSIONS 3.0max. 7.0±2.0 5.5max. 4.5max. +0.10 ø0.5 –0.03 2.5±0.8 Dimensions in mm Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150731 / leadmlcc_halogenfree_fa150_en.fm (21/26) C A P A C I T O R S FA14 Type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE CLASS 1 (TEMPERATURE COMPENSATION) Temperature characteristics NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 Capacitance Tolerance 15nF 22nF 33nF 3.9nF 4.7nF 5.6nF 6.8nF 8.2nF 10nF Rated voltage Edc (V) 50 50 50 100 100 100 100 100 100 Part No. ±5％ FA14NP01H153JNU0□ ±5％ FA14NP01H223JNU0□ ±5％ FA14NP01H333JNU0□ ±5％ FA14NP02A392JNU0□ ±5％ FA14NP02A472JNU0□ ±5％ FA14NP02A562JNU0□ ±5％ FA14NP02A682JNU0□ ±5％ FA14NP02A822JNU0□ ±5％ FA14NP02A103JNU0□ * The part numbers are TDK’s standard specification products. The " □ " of the Part Number contains the packaging symbol, 0 (Bulk packaging) or 6 (Taping packaging). CLASS 2 (TEMPERATURE STABLE) Temperature characteristics X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R Capacitance 150nF 220nF 330nF 470nF 68nF 100nF 150nF 220nF 22nF 47nF 68nF Tolerance Rated voltage Edc (V) 25 25 25 25 50 50 50 50 100 100 100 Part No. ±10％ FA14X8R1E154KNU0□ ±10％ FA14X8R1E224KNU0□ ±10％ FA14X8R1E334KNU0□ ±10％ FA14X8R1E474KRU0□ ±10％ FA14X8R1H683KNU0□ ±10％ FA14X8R1H104KNU0□ ±10％ FA14X8R1H154KRU0□ ±10％ FA14X8R1H224KRU0□ ±10％ FA14X8R2A223KNU0□ ±10％ FA14X8R2A473KRU0□ ±10％ FA14X8R2A683KRU0□ * The part numbers are TDK’s standard specification products. The " □ " of the Part Number contains the packaging symbol, 0 (Bulk packaging) or 6 (Taping packaging). Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150731 / leadmlcc_halogenfree_fa150_en.fm (22/26) C A P A C I T O R S FA16 Type SHAPE & DIMENSIONS 3.5max. 7.0±2.0 6.0max. 5.5max. +0.10 ø0.5 –0.03 2.5±0.8 Dimensions in mm Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150731 / leadmlcc_halogenfree_fa150_en.fm (23/26) C A P A C I T O R S FA16 Type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE CLASS 1 (TEMPERATURE COMPENSATION) Temperature characteristics NP0 NP0 NP0 NP0 NP0 NP0 Capacitance Tolerance 47nF 68nF 100nF 15nF 22nF 33nF Rated voltage Edc (V) 50 50 50 100 100 100 Part No. ±5％ FA16NP01H473JNU0□ ±5％ FA16NP01H683JNU0□ ±5％ FA16NP01H104JNU0□ ±5％ FA16NP02A153JNU0□ ±5％ FA16NP02A223JNU0□ ±5％ FA16NP02A333JNU0□ * The part numbers are TDK’s standard specification products. The " □ " of the Part Number contains the packaging symbol, 0 (Bulk packaging) or 6 (Taping packaging). CLASS 2 (TEMPERATURE STABLE) Temperature characteristics X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R X8R Capacitance 470nF 680nF 1uF 1.5uF 2.2uF 150nF 220nF 330nF 470nF 680nF 1uF 33nF 47nF 68nF 100nF 150nF 220nF 330nF Tolerance Rated voltage Edc (V) 25 25 25 25 25 50 50 50 50 50 50 100 100 100 100 100 100 100 Part No. ±10％ FA16X8R1E474KNU0□ ±10％ FA16X8R1E684KNU0□ ±10％ FA16X8R1E105KNU0□ ±10％ FA16X8R1E155KRU0□ ±10％ FA16X8R1E225KRU0□ ±10％ FA16X8R1H154KNU0□ ±10％ FA16X8R1H224KNU0□ ±10％ FA16X8R1H334KNU0□ ±10％ FA16X8R1H474KNU0□ ±10％ FA16X8R1H684KRU0□ ±10％ FA16X8R1H105KRU0□ ±10％ FA16X8R2A333KNU0□ ±10％ FA16X8R2A473KNU0□ ±10％ FA16X8R2A683KNU0□ ±10％ FA16X8R2A104KNU0□ ±10％ FA16X8R2A154KNU0□ ±10％ FA16X8R2A224KRU0□ ±10％ FA16X8R2A334KRU0□ * The part numbers are TDK’s standard specification products. The " □ " of the Part Number contains the packaging symbol, 0 (Bulk packaging) or 6 (Taping packaging). Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150731 / leadmlcc_halogenfree_fa150_en.fm (24/26) C A P A C I T O R S FA11 Type SHAPE & DIMENSIONS 4.0max. 7.0±2.0 7.0max. 5.5max. +0.10 ø0.5 –0.03 2.5±0.8 Dimensions in mm Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150731 / leadmlcc_halogenfree_fa150_en.fm (25/26) C A P A C I T O R S FA11 Type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE CLASS 1 (TEMPERATURE COMPENSATION) Temperature characteristics NP0 NP0 Capacitance Tolerance 47nF 68nF Rated voltage Edc (V) 100 100 Part No. ±5％ FA11NP02A473JNU0□ ±5％ FA11NP02A683JNU0□ * The part numbers are TDK’s standard specification products. The " □ " of the Part Number contains the packaging symbol, 0 (Bulk packaging) or 6 (Taping packaging). CLASS 2 (TEMPERATURE STABLE) Temperature characteristics X8R X8R X8R X8R X8R X8R Capacitance 1.5uF 2.2uF 3.3uF 4.7uF 470nF 680nF Tolerance Rated voltage Edc (V) 25 25 25 25 100 100 Part No. ±10％ FA11X8R1E155KNU0□ ±10％ FA11X8R1E225KNU0□ ±10％ FA11X8R1E335KNU0□ ±10％ FA11X8R1E475KRU0□ ±10％ FA11X8R2A474KRU0□ ±10％ FA11X8R2A684KRU0□ * The part numbers are TDK’s standard specification products. The " □ " of the Part Number contains the packaging symbol, 0 (Bulk packaging) or 6 (Taping packaging). Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150731 / leadmlcc_halogenfree_fa150_en.fm (26/26) C A P A C I T O R S Packaging Style TAPING DIMENSIONS t Lead pitch 5.0 mm (FA28, FA24, FA26, FA20, FA22 Type) P2 P Δh P F W1 t L0 3 F ød øD 'h W3 W0 L0 W2 H0 P1 Symbol P P0 1 P1 P2 W0 W1 W2 2 W3 H0 øD ød Dimensions (mm) 12.7±1.0 12.7±0.3 3.85±0.7 6.35±1.3 12.0±1.0 9.0±0.5 3.0max. 18.0+1.0, –0.5 16.0±0.5 1.0max. 0.6±0.2 11.0max. 5.0+0.8 ø0.5+0.1, –0.03 ø4.0±0.2 0±2 1 Accumulated pitch tolerance shall be ±2mm for 20 pitches. Adhesive tape shall not stick out from carrier tape. 3 The number of consecutive gaps in the product shall be three or less. 2 P0 t Lead pitch 2.5 mm (FA18, FA14, FA16, FA11 Type) P2 P Δh P øD F ød W3 W0 W1 L0 W2 H0 P1 Symbol P P0 1 P1 P2 W0 W1 W2 2 W3 H0 t L0 3 F ød øD 'h Dimensions (mm) 12.7±1.0 12.7±0.3 5.1±0.7 6.35±1.3 12.0±1.0 9.0±0.5 3.0max. 18.0+1.0, –0.5 16.0±0.5 1.0max. 0.6±0.2 11.0max. 2.5+0.5 ø0.5+0.1, –0.03 ø4.0±0.2 0±2 1 Accumulated pitch tolerance shall be ±2mm for 20 pitches. Adhesive tape shall not stick out from carrier tape. 3 The number of consecutive gaps in the product shall be three or less. P0 2 250以下 AMMO PACK INNER BOX SIZE 下 以 340以下 50 Dimensions in mm Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150731 / leadmlcc_halogenfree_fa150_en.fm